ACP Solutions 20217606 3i High Speed Commercial Oven User Guide

: June 1, 2024
: ACP Solutions

Table of Contents

Oven Operation
Oven Clearances
Manual Cooking
Export Menu via USB Flash Drive
Open Menu in ACP Programming Application
Import Menu via USB Flash Drive
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACP Solutions 20217606 3i High Speed Commercial Oven

ACP Solutions 20217606 3i High Speed Commercial Oven

Oven Operation

Turn the Oven On, Preheat

Icon This oven can be set to a preheat temperature between 200°F (95°C) and 520°F (270°C).

Oven must be plugged in.
(Screen will power on to “Standby mode” within approximately 30 seconds.)
Touch the green power icon
The preheat temperature of the oven will appear in the display.

Symbol Touch the power key again to interrupt preheating, or touch the blue menu icon to access main menu and user options.

Cooking with Preprogrammed Menu Items

After oven has preheated to desired temperature, open oven door, place food in oven and close door
Scroll to choose desired food item from menu and touch the food item you wish to cook. The cook cycle will begin and screen will show remaining cook time.
Note: If “Preheat Warning” is enabled (customized user setting) and preheat temperature differs from default preheat temperature, the control will interrupt cook cycle.
At the end of the cooking cycle, the oven beeps, and displays animation.
Use oven mitts and/or paddle to carefully remove food from oven.

Oven Clearances

A. Allow at least 2” (5.1 cm) of clearance around top of oven. Proper air flow around oven cools electrical components. With restricted air flow, oven may not operate properly and life of electrical parts is reduced.
B. There is not an installation clearance requirement for the back of the oven.
C. Allow at least 1/2” (1.27 cm) of clearance around sides of oven.
D. Install oven so oven bottom is at least 3 feet (91.5 cm) above floor.
Oven Clearances

Care and Cleaning Basics

Refer to Owner’s Manual for complete instructions and recommendations (available online)

DO wear protective gloves and glasses
DO always use recommended cleaning supplies:
Damp towel, plastic scouring pad, ACP Oven Cleaner (CL10) and ACP Oven Shield Protectant (SH10).
DO allow oven and tools to cool before cleaning

DO NOT use caustic cleaning products
DO NOT use water pressure style cleaning systems
DO NOT spray cleaning solution into perforations.

Manual Cooking

Note: “Manual cooking” must be enabled in user options (see page 6)

Use manual cooking when a specific entered time and cooking power levels are desired. It’s very useful when you are experimenting with new food items. Maximum cook time is 99:99 (100 minutes and 13 seconds). Microwave and Fan can be set to power levels between 0-100%.

Note: You may also create and edit recipes using the ACP Programming Application.

After oven has preheated touch blue menu icon.
Note: To guarantee that oven reaches the desired temperature before the start of cook cycle, enable “Preheat Warning” in user options
Touch the “Manual Recipe” option.
To change cooking temperature for recipe, touch temperature icon on the left, and input new temperature. Two frequently used temperatures will appear for quick selection.
Touch green check mark after inputting a temperature.
For Stage 1, enter cooking time by touching time entry box.
A number pad will appear. Enter the desired cook time.
Touch the “OK” icon.
Select desired microwave power by touching microwave power entry box. Choose from options ranging from 0% – 100%.
Select desired fan speed by touching fan speed entry box.
Choose from options ranging from 0% – 100%.
Repeat steps 4-6 for each cooking stage, if more than one cooking stage is necessary.
Note: To save without cooking first, touch the save icon.
Follow instructions on the next page.
Open oven door and place food in oven. Touch green check mark icon to begin cooking.
Once the cook cycle is complete, open door and use oven mitts and/or paddle to carefully remove food.
The display will return to the manual input screen. See instructions on next page to save and edit menu item from manual cook.

Save a Menu Item from Manual Cook:

To save the settings and create menu item, touch the blue save icon
Choose a background color and icon, or an image to customize the menu item. Touch the right arrow to move to the next screen.
Name recipe and touch the green check mark to save.
To reorganize menu items, you may touch, hold and drag them.
Touch green check mark to complete this step and save the menu item.

Note: For larger, and more complex menus, it may be more manageable to create and edit menus using the ACP Programming Application. For detailed instructions, please visit: acpsolutions.com/oven- programming/

Manually Edit an Existing Menu Item:

Touch the blue menu icon at the bottom of the screen.
Touch the “Edit Recipe” option.
Touch the desired recipe to be edited. The control will prompt you to the manual editing screen, where you may revise the cooking settings.
To delete the menu item , touch the orange garbage can icon.
Touch the green check mark to confirm, or touch the “X” to dismiss.
Note: Skip this step if you do not want to cook anything.
Open the oven door and place the food in the oven. Touch green check mark icon to begin cooking with the revised menu item settings. The display will return to the manual input screen at the end of the cook cycle.
Touch the right arrow icon to save any changes made to cook settings and move to the next screen.
If desired, choose a different background color. Touch the right arrow to select an image at the next screen. Touch the right arrow again to move to the next screen.
**** If desired, change the name of the recipe. Touch green check mark to save the menu item.

Manually Move Recipe:

Touch the blue menu icon at the bottom of the screen.
Touch the “Move Recipe” option.
Touch, hold, and drag recipes to different locations on the screen
Move a recipe into a folder : Touch, hold and drag the recipe to the folder.
Move a recipe out of a folder : Touch, hold and drag the recipe to the top of the screen

Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, first backup files by exporting to USB drive.

Touch the blue menu icon at the bottom of the screen.
Scroll down and touch the “Load File” option
When prompted, insert the flash drive into the USB port
When prompted, select “Export Files”.

“Copying Files” screen will appear.
Do not remove USB Flash Drive until “Success” screen appears.

Once the file have copied, touch the “Home” icon to return to the main screen. Remove USB Flash Drive.
Settings and menu items will be loaded on USB Flash Drive and ready to share or open in ACP Programming Application.

Note: For more comprehensive instructions, see ACP Programming
Application User Guide online

Insert flash drive into USB port on computer.
Open ACP Programming Application.
Select “File,” then “Open.” Navigate to flash drive.
Select the menu file and open.

Touch the blue menu icon at the bottom of the screen.
Scroll down and touch the “Load File” option
Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, first backup files by exporting to USB drive.
When prompted, insert the flash drive into the USB port
Touch the desired file to be uploaded.
Once file has uploaded, touch the “Home” icon to return to the main screen.
Settings and menu items will now be loaded and ready to use.

Connect Oven to Network:

Touch the blue menu icon at the bottom of the screen.
Touch the “Network” option.
Connect to network using your choice of Ethernet or Wifi:

To connect via Wi-Fi:

Enable Wi-Fi capability by touching the “On” option.
Select the desired Wi-Fi network. Enter the network’s password. If the network does not immediately appear, touch “Search” to locate the Wi-Fi network.

To connect via Ethernet:

Make sure the Ethernet cord is plugged into the back of the oven and wall jack. If necessary, use pliers to gently remove plastic plug from Ethernet port on right rear of oven. Insert Ethernet cable.

Connect Computer to Oven via Wi-Fi/Ethernet:

Connect computer to same network and enter password.
An IP address will appear on oven control once it has connected to the network. Open an internet browser window on computer and type in the IP address exactly as it appears on oven screen.
Enter your log-in information:
Log-in Information

Username| ACP_MXP
Password| Express
The oven and computer are now connected.

Transfer Recipe Information via Wi-Fi/Ethernet:

After connecting the computer to the oven and logging in, click on the “Upload Recipes” tab in browser window.
Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, first backup files by exporting to USB drive.
Upload menu file by following the instructions on web page.
Touch the green check mark.
Once the file has been fully uploaded, a message will appear that says “Upload Successful!” The recipes will be imported when the oven enters standby mode.”
To cycle the oven through standby mode, touch the home icon then the green power icon. Oven will begin cooling down. Touch the red stop icon to return to home screen. Menu items and settings will be uploaded and ready to use.

There are several options you can change to customize the operation of the oven for your business. The table below shows these options;
the factory setting is shown in bold type.

Access and Modify User Options:

Touch the blue menu icon at the bottom of the screen.
Scroll down and touch to select “User Options.”
Use this menu to modify oven settings.
Touch the left arrow to return to the menu after making each change.

Note: You may also make user options changes using the ACP Programming Application.

| STANDARD DEFAULT PER MODEL
---|---
User Option| Xpress Chef ™ 3i, 60Hz| Xpress Ch e f ™ 3i , 50Hz
Language| English , Chinese (Mandarin), Japanese,
Korean, Russian, German, French, Italian, Polish,
Danish, Greek, Latin, Swedish, Portuguese,
Spanish, Thai, Lao, Dutch, Vietnamese, Arabic,
Ukrainian, Filipino, Norwegian, Hindi, Bengali| English, Chinese (Mandarin), Japanese,
Korean, Russian, German, French, Italian, Polish,
Danish, Greek, Latin, Swedish, Portuguese, Spanish, Thai, Lao, Dutch, Vietnamese, Arabic,
Ukrainian, Filipino, Norwegian, Hindi, Bengali
Time| 12 Hr
24 Hr| 12 Hr
24 Hr
Date| MM/ 00 / YYYY
00 / MM / YYYY| MM/ DO /YYYY
00 / MM / YYYY
Temperature Scale| Celsius
Fahrenheit| Celsius
Fahrenheit
Preheat Temperature