choetech T586-F Mag Leap Duo User Manual

: June 1, 2024
: CHOETECH

Table of Contents

choetech T586-F Mag Leap Duo
Product Information
Product Usage Instructions
How to Use
Attention
Warranty Conditions
EU Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

choetech T586-F Mag Leap Duo

Product Information

Specifications:

Product Name: Mag Leap Duo 3-in-1
Manufacturer: Alza.cz a.s.
Warranty: 2 years
Compatibility: Qi-compatible devices, MagSafe-compatible phones (or equipped with a magnetic plate)

Product Usage Instructions

How to Use:

Insert the IWatch’s original magnetic charger into the provided silicone hole (28mm).
Connect the device to a power adapter.
Place your iPhone 12/13 on the top magnetic pad and position your phone, Apple Watch, and AirPods for charging. (The wireless charging pad below is for AirPods only).

Attention:
Do not disassemble the device. Ensure your device is Qi-compatible or has a Qi receiver kit (not included). Your phone should be MagSafe compatible or have a magnetic plate with indicators flashing. Note that when one device is charging, the other may pause due to foreign object detection.

Warranty Conditions:
A new product purchased from Alza.cz is guaranteed for 2 years. For repairs or services during the warranty period, contact the product seller with the original proof of purchase.

EU Declaration of Conformity:
The equipment complies with essential EU directives.

WEEE:
Waste Electrical and Electronic Equipment information is available on respective Alza websites for different regions.

Contact Information:

Alza.cz: +420 225 340 111
Alza.sk: +421 257 101 800
Alza.hu: +36-1-701-1111
Alza.de: 0800 181 45 44
Alza.at: +43 720 815 999

Importer:
Alza.cz a.s., Jankovcova 1522/53, Holesovice, 170 00 Prague 7, www.alza.cz

Safety Instructions:
Please read all safety instructions in the user manual before use to prevent any accidents or damages.

FAQ:

Q: What should I do if my device is not charging?
A: Ensure that your device is Qi-compatible or has a Qi receiver kit. Check if your phone is MagSafe compatible or has a magnetic plate with flashing indicators. Also, check for any foreign objects that may cause charging interruptions.

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz.

How to Use

choetech-T586-F-Mag-Leap-Duo-Fig-1

The IWatch’s original magnetic charger will be inserted into a silicone hole ( 28mm, the charger is not included)
Connect to a power adapter.
Attach your iPhone 12/13 to the top magnetic pad, and place your Charger on your phone, Apple Watch, or AirPods.

(The wireless charging pad below is for AirPods only)

Attention

Do not disassemble the device.
Please make sure your device is Qi-compatible or has a Qi receiver kit (not included).
Your phone should be MagSafe compatible or equipped with a magnetic plate or phone case to achieve the magnetic charging effect. (Such as a magnetic protective case).
A Quick Charger adapter and cable are required for the fast wireless charging features. (Powe adapter is sold separately)
Do not use or store the magnetic wireless charger in a hot or humid environment as it may damage the circuit.
A magnet may interfere with the magnetic charging of the product or cause malfunctions; To avoid interference between other devices and products, please keep magnetic chip cards (such as ID cards, and credit cards) or medical devices (such as pacemakers, defibrillators, hearing aids, etc.) away from the product. Keep a distance of at least 20 cm from the product, and more than 30 cm during wireless charging.
LED Indicator Status
- Power on – Both indicators flash 3 times quickly and then go out.
- Standby mode – Both indicators go out.
- Charging 1 device – Both indicators are on simultaneously.
- Charging 2 devices – Both indicators are on simultaneously.
- Charging 1 device but paused due to a foreign object detected – Both indicators flash.
- One device was charging, the other paused due to a foreign object being detected. (Please remove the objects to continue charging). – One light is on, and the other light flashes.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment complies with the essential requirements and other relevant provisions of EU directives.

WEEE
This product must not be disposed of as normal household waste by the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines by national regulations.