baseus RC01 Wireless Car Charger User Manual
- June 1, 2024
- Baseus
Table of Contents
baseus RC01 Wireless Car Charger
Product Specifications
- Product Name: Wireless Car Charger
- Model: RC01
- Input: DC 12V/1.5A, 9V/1.67A, 5V/2A
- Output: 15W, 10W, 7.5W, 5W
- Product Standard: Q
- Charging Distance: Not specified
Product Usage Instructions
Step 1: Installation
- Locate a suitable position in your car to mount the wireless charger securely.
- Connect the charger to your car’s power source using the provided cable.
Step 2: Charging Your Device
- Place your Qi-enabled device on the charging area of the wireless charger.
- The charger will automatically detect your device and start charging at the appropriate power level.
Step 3: Removing Your Device
- Once your device is fully charged or you no longer need to charge it, simply lift it off the charging pad.
Frequently Asked Questions (FAQ)
-
Q: Is this wireless charger compatible with all smartphones?
A: This wireless charger is compatible with Qi-enabled smartphones. Make sure your device supports wireless charging before use. -
Q: How do I know if my device is charging?
A: When you place your device on the charger, a light indicator will typically show that charging is in progress. Check your device’s screen for any charging notifications as well.
Mode :RC01
Thank you for choosing this product, Read the instructions carefully before
using!
Parameter Specification
- Input: DC 12V/1.5A, 9V/1.67A/5V12A
- Output: 15W/10W/7.5W/5W
- Product standard: Qi
- Charging Distance: <8MM
- Product Dimensions: 7130.571 mm
- Product Material: ABS+Zinc Alloy
(QC3.0 car charger is required for fast charging mode)
Indicating status and protection functions
- Standby Mode:LED lights are always on.
- Charging mode: LED light is off; the phone is removed, led LED light turns blue andenters standby mode.
- Product size: 7130.571 mm
- Foreign Object Detection: Intelligent recognition of foreign bodies, such as hard objects, keys and other metal or magneticobjects.
- All-Round Protection: Temperature, short circuit, overvoltage, over current
Component assembly
- Put the ball head into the nut first, then insert it into the socket on the back of the holder, tighten the nut
- Loosen the knob and open the hook, install the vent clip onto the air vent,adjust to desired angle.
INSTALLATION
The base is required to be pasted for 24 hours! Then assemble the wireless charger.
FQA
Why not charge, slow charge, or charge?
- Make sure that your phone model has a MagSafe function.
- Please use the QC3.0 car charger.
- Check if the Phone Case is compatible with MagSafe function.
- Please use the original data cable provided by us.
Why is the the mobile phone easy to fall off?
- Please check whether your phone model has MagSafe function
- Please directly use for iPhone 14 / 13 / 12 Series or ONLY compatible with MagSafe phone case
Why can’t 3M sticky pad stick to the place?
- To maximize stickiness, Paste the 3M sticky pad to where you want and wait for 24 hours before using.
- If it still can’t work, please contact us: RollitoCar@outlook.com
TIPS:
- The device can only provide up to 7.5W charging for iPhone 14 / 13/12 series.
- Does not compatible with iPhone 11 Pro Max or previous models.
- Does not compatible with non-magnetic cases, such as metal cases and accessories such as magnets, cards, keys and pop-up grips.
If you have any questions, please do not hesitate to contact us.
Email : RollitoCar@outlook.com
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>