simr Q1 Wireless Audio Adapter User Manual

simr Q1 Wireless Audio Adapter

Specifications

• Wireless Version: 5.3
• Frequency Range: 2.4GHz
• Output Power Category: Class2
• Wireless Mode: HFP/HSP/A2DP/AVRCP
• Wireless Range: up to 33 feet
• Battery: 150mAh
• Working Current: 16~30mA
• Charge Voltage: DC 5.0V
• Charge Current : 150mA

Product Usage Instructions

Charge the device:

1. Ensure the product is fully charged before first use. The indicator will turn red during charging and off when finished.
2. If the device is low on power, the indicator will flash red. Charge it promptly using a DC 5V power supply input only. Avoid using a power supply higher than 5V.
3. Slide the switch to OFF before charging the product. Remember to charge the product at least once every 3 months if not in use for an extended period.

Receive Mode:

1. Turn on the Wireless function on your smartphone and connect to device name “930”.
2. Connect the product to the AUX INPUT port of your desired source using the provided 3.5mm audio cable or plug in your old 3.5mm wired earphones into the device.
3. You can now enjoy wireless music or answer hands-free calls.

Pair with second smartphones, tablets, etc.:

1. After successfully pairing with the first smartphone, turn off its Wireless function to re-enter pairing mode.
2. Turn on the Wireless function of the second smartphone and connect to device name “930”.
3. Turn on the Wireless function of the first smartphone and select “930” in your pairing history.
4. Now both smartphones are connected to the receiver simultaneously.

Operations:

Auto-Connect:
The product will automatically connect to the last paired device when turned on next time. Ensure your smart device’s Bluetooth function is on before turning on the product.

Features

1. Watch TV and don’t disturb family.
2. RX mode pair with mobile phones, turn your old car stereo/home stereo/ wired headphone into wireless one.
3. Build in mic, answer hands-free calls in RX mode.
4. Noise cancellation tech for superb call quality.
5. Battery inside, up to 16 hours long play time.
6. Wireless V5.3 low power consumption, auto connect.
7. A double link, can connect 2 devices at the same time.

Product Diagram

Charge the device

1. Please fully charge the product before first use, the indicator will stay red during charging, and turn off when finished.
2. When the device is in low power state, the indicator light will flash red, power supply higher than 5V) please charge it in time with DC 5V power supply input only. (Do not use
3. Please slide the switch to OFF and then charge the product.

Charge the product at least once every 3 months when not using for a long time

Receive Mode: Pair with your wireless-enabled smartphones, tablets, etc.

1. Turn on the Wireless function of your smartphone, search for “930” and connect.
2.  Connect the product to the AUX INPUT port of your desired source, like headphone/home speaker or car stereo system with provided 3.5mm audio cable, or plug your old 3.5mm wired earphone into the device.
3. Now you can enjoy music wirelessly or answer hands-free calls.

Pair with second smartphones, tablets, etc.

1. After paired with the first smartphone successfully, turn off the Wireless function of the first smartphone, the product will enter pairing mode again.
2. Turn on the Wireless function of the second smartphone, search for “930” and connect.
3. Turn on the Wireless function of the first smartphone, select “930” in your
4. A Noving is mariphones have connected to the receiver at the same time.

Operations

Auto-Connect

The product will connect the last connected device automatically when turned on next time. (Please turn on the Bluetooth function of your smart device before turn on the product.)

Packing List

• Wireless Receiver and Transmitter *1
• Type-C Charging Cable *1
• 3.5mm Audio Cable *1
• RCA Cable *1
• User Manual *1

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction

FAQ

Q: How do I pair the device with my smartphone?
A: Turn on the Wireless function on your smartphone and search for and connect to device name “930”.

Q: How long is the playtime on a full charge?
A: The device offers up to 16 hours of playtime on a full charge.

Q: Can I connect two devices simultaneously?
A: Yes, this device supports double link and can connect to two devices at the same time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>