Yuni V2 Single Sided Stereo Headphone User Manual
- June 1, 2024
- Yuni
Table of Contents
Yuni V2 Single Sided Stereo Headphone
Specifications:
- Stereo sound with just one ear
- Wired/Wireless functionality
- One-year warranty against defects
- Bluetooth connectivity
- 3.5mm cord included
- Compliance with FCC Rules
Product Usage Instructions
Charging and Bluetooth Connection:
To connect via Bluetooth, follow these steps:
- Charge the Yuni V2 fully until the red charging light turns off.
- Switch on the device; the indicator light will blink red and blue for Pairing Mode.
- Find the Yuni V2 on your device’s Bluetooth menu and pair it. The light will flash blue when connected.
- The Yuni V2 can also connect to your device using the included 3.5mm cord without needing to be charged or switched on.
Volume and Playback Controls:
The Yuni V2 controls are as follows:
- Short Press: Previous Track
- Short Press: Next Track
- Long Press: Volume Down
- Play/Pause
- Long Press: Volume Up
Safety Precautions:
Remember these safety tips while using the Yuni V2:
- Avoid listening at high volumes to prevent hearing damage.
- Be aware of your surroundings since the headphones provide single-sided sound.
Follow us online!
www.facebook.com/YuniHeadphones
@YuniHeadphones
@YuniHeadphones
Thank you for purchasing a Yuni V2 (or for having a friend or relative who did)! As a small business, we thrive on word of mouth and your support. Please spread the word to all your friends, family, classmates, and coworkers, and let your contacts know about us on social media. It would mean so much to us!
Prolonged exposure to sound intensities above 85 decibels can lead to perma-
nent hearing damage. Please do not listen to music at high volumes through the
Yuni V2 – we care about your hearing!
When lost in a world of single-sided stereo sound, it can be hard to hear
cars, bicyclists, runners, etc. Please be aware of your surroundings when
using the Yuni V2!
INSTRUCTION
To connect via Bluetooth to your device, charge the Yuni V2 fully (the red charging light will turn off when fully charged) and switch it on. The indicator light will blink red and blue for Pairing Mode. Find the Yuni V2 on your device’s Bluetooth menu. When connected, the light will flash blue. The Yuni V2 does not need to be charged or switched on to connect to your device via the included 3.5mm cord.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.
The Yuni V2 is backed by a one-year warranty against defects in workmanship.
If your Yuni V2 malfunctions within one year of purchase, please contact us
for a replacement.
www.yuniheadphones.com
[email protected]
FAQ:
What should I do if my Yuni V2 malfunctions?
If your Yuni V2 malfunctions within one year of purchase, please contact us for a replacement under warranty.
Can I connect the Yuni V2 to my device without Bluetooth?
Yes, you can use the included 3.5mm cord to connect the Yuni V2 to your device without Bluetooth.
How long is the warranty period for the Yuni V2?
The Yuni V2 is backed by a one-year warranty against defects in workmanship.