tp-link T150500-2-DT WiFi Router Instruction Manual
- June 10, 2024
- tp-link
Table of Contents
T150500-2-DT WiFi Router
Chapter 17
Manage the Router
2. Select the correct Start date and time when daylight saving time starts at
your local time zone.
3. Select the correct End date and time when daylight saving time ends at
your local time zone.
4. Click SAVE. · To set system language: Select the language from the
dropdown list, then click SAVE.
17 10 Set the Router to Reboot Regularly
The Scheduled Reboot feature cleans the cache to enhance the running
performance of the router. 1. Visit http://tplinkwifi.net, and log in with
your TP-Link ID or the password you set for
the router. 2. Go to Advanced > System > Reboot. 3. Tick the Enable box of
Reboot Schedule.
130
Chapter 17
Manage the Router
4. Specify the Reboot Time when the router reboots and Repeat to decide how
often it reboots.
5. Click SAVE.
17 11 Control the LED
The LED of the router indicates its activities and status. You can enable the
Night Mode feature to specify a time period during which the LED is off. 1.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
you set for
the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4.
Specify the LED off time, and the LED will be off during this period every
day. 5. Click SAVE.
131
Chapter 17
Manage the Router
17 12 Volume Control
You can disable the speaker or adjust the volume of the device’s speaker, and
you can also enable Do Not Disturb mode to schedule when the speaker is off.
- Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
password you set for
the router. 2. Go to Advanced > System > Volume Control. 3. You can disable the speaker or hold and drug the bar to adjust the volume of the
speaker.
4. (Optional) If you want to schedule when the voice alerts will be silenced.
Enable Do Not Disturb Mode
5. Specify the speaker off time, and the speaker will be off during this
period every day. 6. Click SAVE.
132
FAQ
Q1 What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the
password has been altered: 1. Connect your computer to the router using an
Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link
ID or the password you set for
the router. 3. Go to Wireless to retrieve or reset your wireless password.
Q2 What should I do if I forget my web management password?
· If you are using a TP-Link ID to log in, or you have enabled the Password
Recovery feature of the router, click Forgot password on the login page and
then follow the instructions to reset it.
· Alternatively, press and hold the Reset button of the router for about 6
seconds until the Power LED blinks to restore factory default settings, and
then visit http://tplinkwifi.net to create a new login password.
Note: · Please refer to Password Recovery to learn how to configure Password
Recovery. · You’ll need to reconfigure the router to surf the internet once
the router is reset, and please mark down your new
password for future use.
Q3 What should I do if I can’t log in to the router’s web management page?
This can happen for a variety of reasons. Please try the methods below to log
in again. · Make sure your computer is connected to the router correctly and
the corresponding
LED indicator(s) light up. · Make sure the IP address of your computer is
configured as Obtain an IP address
automatically and Obtain DNS server address automatically. · Make sure
http://tplinkwifi.net or http://192.168.0.1 is correctly entered. · Check your
computer’s settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network
status and tasks.
2 ) Click Internet Options on the bottom left. 3 ) Click Connections and
select Never dial a connection.
133
4 ) Click LAN settings and deselect the following three options and click OK.
5 ) Go to Advanced > Restore advanced settings, click OK to save the settings.
134
· Use another web browser or computer to log in again. · Reset the router to
factory default settings and try again. If login still fails, please
contact the technical support.
Note: You’ll need to reconfigure the router to surf the internet once the
router is reset.
Q4 What should I do if I can’t access the internet even though the
configuration is finished?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
you set for the router.
2 Go to Advanced> Network > Status to check internet status: If IP Address is
a valid one, please try the methods below and try again: · Your computer might
not recognize any DNS server addresses. Please manually
configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 )
Enter 8.8.8.8 as Primary DNS, click SAVE.
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
135
· Restart the modem and the router. 1 ) Power off your modem and router, and
leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2
minutes until it gets a solid cable or Internet light. 3 ) Power on the
router. 4 ) Wait another 1 or 2 minutes and check the internet access.
· Reset the router to factory default settings and reconfigure the router. ·
Upgrade the firmware of the router. · Check the TCP/IP settings on the
particular device if all other devices can get internet
from the router. As the picture below shows, if the IP Address is 0 0 0 0,
please try the methods below and try again:
· Make sure the physical connection between the router and the modem is
proper. · Clone the MAC address of your computer.
136
1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
password you set for the router.
2 ) Go to Internet or Advanced > Network > Internet and focus on the MAC Clone
section.
3 ) Choose an option as needed (enter the MAC address if Use Custom MAC
Address is selected), and click SAVE.
Tips: · Some ISP will register the MAC address of your computer when you
access the internet for the first time
through their Cable modem, if you add a router into your network to share your
internet connection, the ISP will not accept it as the MAC address is changed,
so we need to clone your computer’s MAC address to the router. · The MAC
addresses of a computer in wired connection and wireless connection are
different.
· Modify the LAN IP address of the router.
Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP
address, which may conflict with the IP range of your existing ADSL
modem/router. If so, the router is not able to communicate with your modem and
you can’t access the internet. To resolve this problem, we need to change the
LAN IP address of the router to avoid such conflict, for example, 192.168.2.1.
1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the
password you set for the router.
2 ) Go to Advanced > Network > LAN. 3 ) Modify the LAN IP address as the
follow picture shows. Here we take 192.168.2.1
as an example. 4 ) Click SAVE.
· Restart the modem and the router. 137
1 ) Power off your modem and router, and leave them off for 1 minute. 2 )
Power on your modem first, and wait about 2 minutes until it get a solid cable
or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes
and check the internet access. · Double check the internet connection type. 1
) Confirm your internet connection type, which can be learned from the ISP. 2
) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password
you set
for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your
Internet Connection Type and fill in other parameters. 5 ) Click SAVE.
6 ) Restart the modem and the router again. · Please upgrade the firmware of
the router. If you’ve tried every method above but still cannot access the
internet, please contact the technical support.
Q5 What should I do if I can’t find my wireless network or I cannot connect
the wireless network?
If you fail to find any wireless network, please follow the steps below: ·
Make sure the wireless function of your device is enabled if you’re using a
laptop with
built-in wireless adapter. You can refer to the relevant document or contact
the laptop manufacturer.
138
· Make sure the wireless adapter driver is installed successfully and the
wireless adapter is enabled. · On Windows 7 1 ) If you see the message No
connections are available, it is usually because the wireless function is
disabled or blocked somehow. 2 ) Click Troubleshoot and windows might be able
to fix the problem by itself. · On Windows XP 1 ) If you see the message
Windows cannot configure this wireless connection, this is usually because
windows configuration utility is disabled or you are running another wireless
configuration tool to connect the wireless. 2 ) Exit the wireless
configuration tool (the TP-Link Utility, for example). 3 ) Select and right
click on My Computer on desktop, select Manage to open Computer Management
window. 4 ) Expand Services and Applications > Services, find and locate
Wireless Zero Configuration in the Services list on the right side. 5 ) Right
click Wireless Zero Configuration, and then select Properties. 6 ) Change
Startup type to Automatic, click on Start button and make sure the Service
status is Started. And then click OK.
If you can find other wireless network except your own, please follow the
steps below: · Check the WLAN LED indicator on your wireless router/modem. ·
Make sure your computer/device is still in the range of your router/modem.
Move it
closer if it is currently too far away. · Go to Wireless or Advanced >
Wireless > Wireless Settings, and check the wireless
settings. Double check your wireless Network Name and SSID is not hided. If
you can find your wireless network but fail to connect, please follow the
steps below: · Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key, usually you can only find it on the
label of your router.
139
2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using
a security key instead, and then type in the Wireless Password/Network
Security Key.
3 ) If it continues to show note of Network Security Key Mismatch, it is
suggested to confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
· Windows unable to connect to XXXX / Can not join this network / Taking
longer than usual to connect to this network: · Check the wireless signal
strength of your network. If it is weak (1~3 bars), please move the router
closer and try again. · Change the wireless Channel of the router to 1, 6 or
11 to reduce interference from other networks. · Re-install or update the
driver for your wireless adapter of the computer.
140
FCC compliance information statement
Product Name: BE19000 Tri-Band Wi-Fi 7
Router Model Number: Archer BE805
Component Name I.T.E. Power Supply
Model
T150500-2-DT
Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
141
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC regulations restrict operation of this device to indoor use only. The
operation of this device is prohibited on oil platforms, cars, trans, boats,
and aircraft, except that operation of this device is permitted in large
aircraft while flying above 10000 feet. Operation of transmitters in the
5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems.
FCC compliance information statement
Product Name: I T E Power Supply Model Number: T150500-2-DT Responsible party:
TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website:
http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail:
sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
142
· Reorient or relocate the receiving antenna. · Increase the separation
between the equipment and receiver. · Connect the equipment into an outlet on
a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/ TV
technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1. This device may not
cause harmful interference. 2. This device must accept any interference
received, including interference
that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. We, TP-Link USA Corporation, has
determined that the equipment shown as above has been shown to comply with the
applicable technical standards, FCC part 15. There is no unauthorized change
is made in the equipment and the equipment is properly maintained and
operated.
Issue Date: 2023-03-10
143
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
OPERATING FREQUENCY(the maximum transmitted power)
2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz (23dBm) 5250 MHz -5350 MHz
(23dBm) 5470 MHz -5725 MHz (30dBm) 5945MHz -6425 MHz (23dBm) Frequency band:
5150 – 5250 MHz: Indoor use: Inside buildings only. Installations and use
inside road vehicles and train carriages are not permitted. Limited outdoor
use: If used outdoors, equipment shall not be attached to a fixed installation
or to the external body of road vehicles, a fixed infrastructure or a fixed
outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within
the 5170 – 5250 MHz band. Frequency band: 5250 – 5350 MHz: Indoor use: Inside
buildings only. Installations and use in road vehicles, trains and aircraft
are not permitted. Outdoor use is not permitted. Frequency band: 5470 – 5725
MHz: Installations and use in road vehicles, trains and aircraft and use for
unmanned aircraft systems (UAS) are not permitted.
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of
Conformity may be found at https://www.tp-link.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the
limitation of exposure of the general public to electromagnetic fields by way
of health protection.
144
The device complies with RF specifications when the device used at 20 cm from
your body.
National Restrictions
Attention: This device may only be used indoors in all EU member states, EFTA
countries and Northern Ireland.
AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL
PT RO SE SI SK UK(NI)
UKCA Mark
UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK Declaration of Conformity may be found at https://www
tp-link com/support/ukca
National Restrictions
Attention: This device may only be used indoors in Great Britain.
UK
145
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire
de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Caution:
The device for operation in the band 51505250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems; DFS (Dynamic Frequency Selection) products that operate in the bands
52505350 MHz, 5470-5600MHz, and 5650-5725MHz.
Avertissement:
Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Les produits utilisant la technique d’atténuation DFS (sélection dynamique des
fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. ISED
regulations restrict operation of this device to indoor use only. The
operation of this device is prohibited on oil platforms, cars, trains, boats,
and aircraft, except that operation of this device is permitted in large
aircraft while flying above 10000 feet. Operation of transmitters in the
5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems. Les réglementations ISED limitent le fonctionnement
de cet appareil à une utilisation en intérieur uniquement. L’utilisation de
cet appareil est interdite sur les plates-formes pétrolières, les voitures,
les trains, les bateaux et les avions, sauf que l’utilisation de cet appareil
est autorisée dans les avions long courrier en vol au-dessus de 10 000 pieds.
L’exploitation d’émetteurs dans la bande
146
5,925-7,125 GHz est interdite pour le contrôle ou les communications avec des
systèmes d’avions sans pilote.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC
établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement
et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
.
NCC Notice & BSMI Notice:
· ·
· ·
147
·
·
BE19000 Tri-Band Wi-Fi 7 Router Equipment name
Archer BE805 Type designation (Type)
nit
Lead (Pb)
Restricted substances and its chemical symbols
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent chromium
(Cr+6)
Polybrominated
biphenyls
(PBB)
Polybrominated diphenyl ethers
(PBDE)
PCB
–
1.0.1 wt %0.01 wt % Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2″” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The “” indicates that the restricted substance corresponds to the exemption.
, .
Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do
not attempt to disassemble, repair, or modify the device. If you need service,
please contact us. · Do not use damaged charger or USB cable to charge the
device. · Do not use any other chargers than those recommended · Do not use
the device where wireless devices are not allowed.
148
· Adapter shall be installed near the equipment and shall be easily
accessible.
· Use only power supplies which are provided by manufacturer and in the
original packing of this product. If you have any questions, please don’t
hesitate to contact us.
· Operating Temperature: 0 ~ 40 (32 ~ 104)
· This product uses radios and other components that emit electromagnetic
fields. Electromagnetic fields and magnets may interfere with pacemakers and
other implanted medical devices. Always keep the product and its power adapter
more than 15 cm (6 inches) away from any pacemakers or other implanted medical
devices. If you suspect your product is interfering with your pacemaker or any
other implanted medical device, turn off your product and consult your
physician for information specific to your medical device.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
Explanations of the symbols on the product label
Symbol
Explanation DC voltage
AC voltage
Class II equipment
Polarity of output terminals
Energy efficiency Marking
Indoor use only
Caution
Operator’s manual
RECYCLING This product bears the selective sorting symbol for Waste electrical
and electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. User has the choice to
give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment.
149
References
- Link: Simple, secure one-click payments
- Trying to configure the Router? | TP-Link
- WiFi Networking Equipment for Home & Business | TP-Link
- CE Regulatory Compliance | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>