SPC ATENEA FIT 3 User Guide
- June 3, 2024
- SPC
Table of Contents
SPC ATENEA FIT 3
Download the SPC IoT App > Install > Create account > Login.
Create your family and the rooms in your house
Turn on the Bluetooth, the location and the WiFi of the mobile device with which you are going to make the link. Make sure that the IoT device to which you are going to connect is switched on before clicking on the “+” symbol in the upper right part of the main page of the app.
Then, at the top of the page “Add manually” the mess “Discovering devices…” will appear. If the device you want to link appears, press the “Add” button.
If there is only one device, it will start to link automatically. If more than one device is detected, click on the “+” button next to the devices you want to add. Once the process is finished, a “ ” will appear next to the device name. Click on the “Next” button at the bottom to finish the link.
When finished, you will see a window in which it says “Successfully added” over the icon and the name of the added device. Press “Done” at the top right to return to the main screen.
Go to the device’s control panel to see the weight data. If the scale is going to be used by more than one person, an account per new user must be added using the “Add a new user” option.
WARNING
- For measuring parameters other than weight, weighing must be done without your shoes on (with bare feet).
- Weighing without shoes is not recommended for pregnant women or children.
To read the full manual and resolve any queries, visit: support.spc.es
Copyright © 2022. Smart Products Connection S.A. All rights reserved. SPC is a registered trademark of Smart Products Connection S.A. spc.es