WALLGEM 3D Diamond Mirror Polished Instruction Manual

WALLGEM 3D Diamond Mirror Polished

Product Information: WALLGEM Mirrors

Specifications

• Material: Mirrored surface with adhesive backing
• Applicable Surfaces: Painted walls, Wooden walls, Metal surfaces, Ceramic tiles, Composite boards, Glass walls
• Not Applicable Surfaces: Ash walls, Peeling walls, Textured wallpaper

Product Usage Instructions:

Installation Procedure

1. First, wipe the wall to remove any impurities.
2. Remove the paper from the back of the tile to expose the adhesive.
3. Tear off the protective film from the reflective surface.
4. Wipe the mirrored surface with a cloth and attach it to a desired surface.

Creating a Pattern

1. Tear the protective film off the WALLGEM mirrors before attaching them.
2. Paste triangle and fix it with the X template.
3. Paste the diamond next to the X template.
4. The X template can be reused. Do not tear off the glue on the back of the X template.
5. Continue the pattern as desired.

Appropriate Surfaces for Application

• Painted walls
• Wooden walls
• Metal surfaces
• Ceramic tiles
• Composite boards
• Glass walls

Not Applicable Surfaces

• Ash walls
• Peeling walls
• Textured wallpaper

Frequently Asked Questions (FAQ)

• Q: Can WALLGEM mirrors be easily removed once attached?
  A: Yes, WALLGEM mirrors can be carefully removed from surfaces. It is recommended to slowly peel them off to avoid damaging the wall or surface underneath.

• Q: Are WALLGEM mirrors suitable for bathroom use?
  A: WALLGEM mirrors can be used in bathrooms, but direct exposure to water should be avoided to maintain the adhesive quality over time.

• Q: Can WALLGEM mirrors be repositioned after initial attachment?
  A: While the adhesive backing is strong initially, repositioning the mirrors may reduce its effectiveness. It is best to plan the placement carefully before attaching them.

 WALLGEM – USER MANUAL

Installation procedure

1. Firs wipe the wall to remove any impurities
2. Remove the paper from the back of the tile to expose the adhesive.
3. Tear off the protective film from the reflective surface.
4. Wipe the mirrored surface with a cloth and attach to a desired surface.

Creating a pattern

Tear the protective film off the WALLGEM mirrors before in order to attach them.

1. Paste triangle and fix it with the X template.
2. Paste the diamond next to the X template.
3. The X template can be reused. Do not tear off the glue on the back off the X template.
4. Continue the pattern.

Appropriate surfaces for application

1. Painted walls
2. Wooden walls
3. Metal surfaces
4. Ceramic tiles
5. Composite boards
6. Glass walls

Do not apply to

1. Ash walls
2. Peeling walls
3. Textured wallpaper

You have received the user manual in your language together with the invoice to your e-mail address. It can also be found on our website under the tab ‘user manual’.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>