SWITCH WORKS 240-SWTS-LICPLT Universal Street Legal License Plate Frame Installation Guide

SWITCH WORKS 240-SWTS-LICPLT Universal Street Legal License Plate Frame

Product Information

Specifications

• Model: 240-SWTS-LICPLT
• Type: Universal Street Legal License Plate Frame with LED
• Manufacturer: SSV WORKS
• Warranty: 1 year limited warranty against defects in material or workmanship

Product Usage Instructions

Installation Steps

1. Use a Phillips Screw Driver and 4mm Allen Wrench for installation.
2. Assemble the license plate between the license plate frame and bracket using the provided screws and locknuts.
3. Secure the license plate frame bracket to the vehicle using the button head Allen screws and locknuts.
4. Adjust the angle of the license plate frame bracket for preferred mounting options.
5. If not using the adjustable bracket, directly mount the license plate frame to the vehicle panel using the provided screws and locknuts.
6. Plug in the license plate frame LED cable connector to the SWITCH Works Turn Signal kit (sold separately).

Frequently Asked Questions (FAQ)

• Q: What tools are needed for installation?
  A: Phillips Screw Driver and 4mm Allen Wrench are required for installation.

• Q: What is the warranty information for the product?
  A: The product is covered by a limited 1-year warranty against defects in material or workmanship. Contact SSV Works for further warranty details.

• Q: Can the license plate frame be mounted without using the adjustable bracket?
  A: Yes, the license plate frame can be directly mounted to the vehicle panel without using the provided adjustable bracket. Follow the instructions provided for direct mounting.

240-SWTS-LICPLT
Universal Street Legal License Plate Frame with LED

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751

WARRANTY INFORMATION:

All SWITCH Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship. Contact SSV Works for further warranty information.

Please read and understand these instructions completely before installation to avoid possible injury, or damage to the accessory or vehicle.

SWITCH Works License Plate Parts List

• SWITCH Works License Plate Frame with LED Light
• License Plate Frame Bracket [B-MBP3422]
• License Plate Frame Hardware Pack [B-HP3425]

 SWITCH Works License Plate Frame Installation

TOOLS NEEDED FOR INSTALLATION

• Phillips Screw Driver
• 4mm Allen Wrench

• A. Use (4) M4 Phillips flat head screws and flanged locknuts, included in the kit, to assemble the license plate between the license plate frame and bracket as shown above.
• B. Use the button head Allen screws and flanged locknuts, included in the kit, to secure the license plate frame bracket to the vehicle.
• C . The license plate frame bracket has a 240 up and down adjustability for various mounting options such as above bumper, vertical body mounting or under bumper mounting. Tighten the 3mm bracket hinge screws to lock the angle (see inset above).
• D. Plug in the license plate frame LED cable connector to the SWITCH Works Turn Signal kit (sold separately).

Alternative mounting option without using the Adjustable Bracket

The license plate frame can also be mounted directly to the vehicle panel without using the provided adjustable bracket. Use the (4) M4 Phillips flat head screws and flanged locknuts, included in the kit, to secure the license plate frame to the vehicle.

© 2024 SSV Works, Oxnard, CA 93030 SWTS-LICPLT Rev. A 2-6-24

References

• SSV Works

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>