Paul Neuhaus 7505018 LED Ceiling Light Instruction Manual

Radio remote control operating instructions

• short press: switch all off

• long press: teach the remote control to the light. If the light flickers three times, the light has been taught to the remote control.

• short press: CCT function is switched on / off

• long press: night light function (warm white/ 10% brightness)Turn off the light using the remote control, press the night light button again to switch to night light mode.

• Set brightness/ speed:
  Increase the brightness when only white is switched on.
  Increase the speed of the RGB color modes.

• CCT Steps: 3500 K – 5000 K – 2700 K

• **** Reduce the color temperature

• **** Increase the color temperature

• Set brightness/ speed:
  Reduce the brightness if only white is switched on.
  Reduce the speed of the RGB color modes

• RGB color mode: switch mode

• RGB color mode: switch back mode

• Switch RGB on / off

• RGB

• Start /stop RGB color change
  Description| Operation Data
  ---|---
  Battery| 2x 1,5V AAA
  Transmission frequency| 2,4GHz
  Transmitting power| max. 0,1dBm
  No-load current| 5uA
  Operating current| 300uA
  Range of the remote control| $1Om

References

• Paul Neuhaus.de Leuchten für Haus und Garten

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>