SEALEY MK54.V3 Folding Bumper Panel Stand Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
FOLDING BUMPER / PANEL STAND
MODEL NO: MK54.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions manual
SAFETY
Familiarise yourself with the
application, limitations and hazards of the panel stand.
Maintain the panel stand in good
condition (use authorised replacement parts).
Keep the panel stand clean for
best and safest performance.
Locate the panel stand in a
suitable work area.
‰ WARNING! Use the panel stand on level and solid ground, preferably concrete.
DO NOT overload the panel stand. Safe working load 140kg.
DO NOT climb on the panel stand.
DO NOT use the panel stand for any purpose other than for which it is
designed.
DO NOT use the panel stand if any parts are damaged or missing as this may
cause failure and/or personal injury.
Keep the work area clean,
uncluttered and ensure that there is adequate lighting.
Keep children and unauthorised
persons away from the work area.
WARNING! The warnings, cautions
and instructions discussed in this manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and
caution are factors which cannot be built into this product, but must be
applied by the operator.
INTRODUCTION
Ideal for storage of bumpers prior to preparation and spraying. Adjustable stand width with extendable arms makes this unit suitable for holding various types and styles of bumpers. Folds away for easy storage whilst not in use.
SPECIFICATIONS
Model No: ………………………………………………………. MK54.V3
Arms Closed: ……………………………………………………. 700mm
Arms Fully Extended: ………………………………………. 2000mm
Folded Height: …………………………………………………. 1130mm
ASSEMBLY
Parts assembly are as per parts diagram attached.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
MK54.V3 Issue 1 07/11/22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>