KKSB B0CQ66CP1Z Raspberry Pi 5 Case Instruction Manual

June 1, 2024
KKSB

KKSB B0CQ66CP1Z Raspberry Pi 5 Case

KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-product

Product Information

  • Specifications:
    • Product Name: KKSB Raspberry Pi 5 Case for HATs and Coolers
    • Compatibility: Raspberry Pi 5
    • Material: Plastic
    • Includes: Rubber feet, cooler, stackable 40 pin gpio header, spacers

FAQs

  • Q: Can I use this case with other Raspberry Pi models?
    • A: This case is specifically designed for Raspberry Pi 5 and may not be compatible with other models due to board layout and dimensions variations.
  • Q: Are additional assembly tools required?
    • A: Basic tools like a screwdriver may be needed for assembling certain components onto the case. Refer to the user manual for specific tool requirements.

Assembly Instructions

Assembly Instructions: KKSB Raspberry Pi 5 Case for HATs and Coolers

  1. Mount the rubber feet.KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(1\)
    • a) Assemble the cooler on the Raspberry Pi 5.
    • b) Assemble the stackable 40-pin gpio header.
  2. Assemble the 4 spacers. Different HATs have different lengths on their onboard GPIO headers. For most versions, you can either use the 4 shorter brass spacers (18mm) or the taller stainless steel spacers(20mm)KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(3\)
    • Example of when to use brass spacers:KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(4\)
    • Example of when to use stainless steel spacers:KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(5\)
  3. In this step we are using the Pimoroni NVMe HAT. But the steps are similar for all HATs.
    • a) Connect the Cable the the Pi5 and the HAT. KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(7\)
    • b) The Pimoroni NVME will be assembled upside down like the below image. Secure the HAT with the 4 pan head screws.KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(8\)
  4. Below are some steps of how to fit most types of HATs with connectors. You can remove parts of the ventilation slots with a flat screwdriver.
    • a) Put together the HAT and position the side panel above the connectors to identify which slots need to be taken out.KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(9\)KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(10\)KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(11\) KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(12\)
  5. Put together the side panels with the bottom piece and then Put together the top part.KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(13\) KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(14\)KKSB-B0CQ66CP1Z-Raspberry-Pi-5-Case-fig-1 \(15\)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals