niko 154-56102 Onefold Faceplate Owner’s Manual

Table of Contents

niko-154-56102-Onefold-Faceplate-PRODUCT

Installation

Make sure the power is turned off before installation.
Remove the existing faceplate by unscrewing it from the switch.
Align the new faceplate over the switch and secure it in place with the provided screws.
Turn the power back on and test the functionality of the double switch.

Regularly clean the faceplate with a damp cloth to prevent dust buildup.

Avoid contact with water while installing or using the faceplate.
If you encounter any issues with the product, contact the manufacturer for assistance.

The Niko Rocker onefold faceplate for a double switch clicks onto a single-installed double switch function.
The faceplate combines with any available Niko Rocker for double-switch functions.
It consists of an upper frame, light guide and lower frame that are mechanically interconnected.
The light guide is made of translucid plastic and transports the light from the optional LED to the lever.
The upper frame is made of steel. The lower frame is made of white polycarbonate (PC) + acrylic-styrene-acrylate (ASA), white coated. The upper frame is 2 mm thick and the lower frame 6 mm.
Niko recommends a design combination with the Niko Rocker in the following colour: steel white coated.

Onefold faceplate, for double switch functions, Niko Rocker steel white coated.

Simple faceplate for one switch.
Colour: enamelled steel white (approximately NCS S 1002 – B50G, RAL 000 90 00)
Recommended colour central plate: steel white coated
Frame composition: It consists of an upper frame, light guide and lower frame that are mechanically interconnected.
Material upper frame: The upper frame is made of steel.
Material lower frame : The lower frame is made of white polycarbonate (PC) + acrylic-styrene-acrylate (ASA), white coated.
Frame thickness: The upper frame is 2 mm thick and the lower frame 6 mm.
Lighting element
- the faceplate is fitted with a light guide
- the light guide is made of a translucid plastic
- the light guide transports the light from the optional LED to the lever
- please note that the faceplate should not be mounted upside down to ensure that the optional LED fits nicely with the light guide
Surface-mounting height: max. 8.5 mm
Fire safety
- self-extinguishing: complies with a filament test of 650°C
- halogen-free
Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK06
Dimensions (HxWxD): 83 x 83 x 13 mm
Dimensions visible (HxWxD): 83 x 83 x 8 mm
Certification marks: CEBEC
Marking: CE

Q: How do I know if this faceplate is compatible with my double switch?
- A: Check the model number of your switch and compare it to the model number of this faceplate (154-56102) to ensure compatibility.
Q: Can I paint over this steel white-coated faceplate?
- A: It is not recommended to paint over the faceplate as it may affect its functionality and appearance.