weinmann 9100 Multi Layer Pipe Ring User Manual
- June 1, 2024
- WEINMANN
Table of Contents
weinmann 9100 Multi Layer Pipe Ring
Product Specifications
- Model: 9100
- Working Pressure: 10 bar
- Working Temperature: Not specified
Product Description
This product is a valve assembly consisting of the following components:
- CARLOTTA MUTTER
- ANELLO TAGLIATO KLEMMRING CORPO
- ORING EDPM (EPDM O-rings)
- ORING EDPM (EPDM O-ring)
- ANELLO in PTFE (PTFE ring)
Product Usage Instructions
Installation
- Ensure all components are clean and free from debris.
- Assemble the parts in the following order: CALOTTA MUTTER, ANELLO TAGLIATO KLEMMRING, CORPO, ORING EDPM, ORING EDPM, ANELLO inPTFE.
- Tighten all connections securely but avoid over-tightening to prevent damage.
Maintenance
Regularly inspect O-rings for signs of wear or damage and replace if
necessary. Keep the valve assembly clean and lubricate moving parts as needed.
Operation
To operate the valve, turn the CALOTTA MUTTER to open or close the flow of
fluid. Ensure proper pressure and temperature conditions are maintained within
the specified limits.
Frequently Asked Questions (FAQ)
-
Q: What is the maximum working temperature for this product?
A: The maximum working temperature is not specified in the provided information. Please refer to the manufacturer’s guidelines or contact customer support for detailed temperature limits. -
Q: How often should the O-rings be replaced?
A: O-rings should be inspected regularly and replaced if signs of wear or damage are present. As a general guideline, consider replacing O-rings during routine maintenance or if leaks are detected.
DESCRIPTION
Compression fittings with O-ring for multi-layer pipe.
FEATURES
- Brass nut and ring
- EPDM O-ring
- PTFE ring
- Working pressure 10bar
- Working temperature –20°C +110°C
LEADING DIMENSIONS
Multilayer clamping torque PEX-AL-PEX: 25-35 Nm
OVERVIEW
PART NAME
NUT
CUTTED RING
BODY
EPDM O-rings
EPDM O-ring
PTFE ring