Noark Trinix Three Phase Hybrid Inverter Charger User Guide

June 1, 2024
NoarK

Noark-logo

Noark Trinix Three Phase Hybrid Inverter Charger

Product Information

Specifications:

  • Model: MyNoark Energy Management System
  • Compatibility: Noark Inverter
  • Wireless Standard: 2.4GHz 802.11b/g/n
  • Version: V1 202403

Product Usage Instructions

Commissioning and Connecting Your Solar System to MyNoark Energy Management System:

  • Step 1: Power On and Connect WiFi Dongle

  • Make sure the Noark inverter is powered on. Secure the Noark WiFi Dongle into the WiFi/RS232 interface at the bottom of the inverter using the original screws.

  • Step 2: Download App
    Scan the QR code above to download and install the myNoark app.

  • Step 3: Connect to WiFi Network
    Access the WiFi settings on your device and connect to the designated WiFi network. Remember the password for later steps.

  • Step 4: Register/Login
    Register or log in to your account. Alternatively, tap on WLAN Configuration on the Log In page.

  • Step 5: Confirm WiFi Connection
    Follow the on-screen guide to confirm successful WiFi connection. Tap Next to proceed.

  • Step 6: Input Dongle Serial Number
    Scan the QR code on the WiFi Dongle or manually input the serial number

  • Step 7: Re-enter WiFi Password
    Re-enter the WiFi password and tap Next. Start the configuration process.

  • Step 8: Verify Configuration
    If successful, tap Next. Otherwise, review input details.

  • Step 9: Check System Operation
    Observe operational data from the inverter to ensure correct functioning.

  • Step 10: Perform Initial Settings
    In the Config tab, adjust Work Mode, Grid Mode, and Export Limit settings.

Congratulations! Your inverter is now online. Log in to your account to start creating a site for you or your customer.

FAQs :

  • Q: Is the MyNoark Energy Management System compatible with all inverters?
    A: The MyNoark Energy Management System is compatible with Noark Inverters.

  • Q: What wireless standard does the system support?
    A: The system supports the 2.4GHz 802.11b/g/n wireless standard.

  • Q: How can I reset the WiFi connection?
    A: You can reset the WiFi connection by following the steps outlined in the user manual or contacting customer support for assistance.

Quick Guide

Commissioning and Connecting Your Solar System to MyNoark Energy Management System

Please proceed with the following instructions to commission and connect your solar system to the MyNoark Energy Management System.

  • STEP 1
    Make sure the Noark inverter is powered on. Next, secure the Noark WiFi Dongle into the WiFi/RS232 interface situated at the bottom of the inverter. Secure it in place using the original screws.Noark-Trinix-Three-Phase-Hybrid-
Inverter-Charger- \(1\)

  • STEP2
    Scan the QR code above to download and install myNoark app. Please proceed with the following instructions to commission and connect your solar system to the MyNoark Energy Management System.
    STEP 3
    Access the WiFi settings on your device and connect to the designated WiFi network that your system will be linked to. Have the password ready as it will be required for later steps.

  • STEP 4
    Register or log in to your account. Alternatively, tap on WLAN Configuration on the Log In page

  • STEP 5
    Follow the on-screen guide to confirm that the WiFi has been successfully connected. Then, tap “Next” to proceed.
    Note Gateway only compatible with 2.4GHz 802.11b/g/n wireless standard. Noark-Trinix-Three-Phase-Hybrid-Inverter-Charger-
\(2\)

  • STEP 6
    Scan the QR code located on the front side of the WiFi Dongle. Alternatively, manually input the dongle serial number.

  • STEP 7
    Re-enter the WiFi password and tap “Next”. On the following page, tap “Start” to initiate the configuration process.

  • STEP 8
    If the configuration is successful, tap “Next”. Otherwise, go back and verify that the input details are correct.

  • STEP 9
    You will observe operational data from the inverter, indicating whether the system is functioning correctly.

  • STEP 10
    On the “Config” tab, you can perform several initial settings, including Work Mode, Grid Mode, and Export Limit.

Congratulations! Your inverter is now online! Now, log in your account and start creating a site for you or your customer.
noark.au

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals