HY-LITE DAGCrzW4pb0 Acrylic Block Windows User Manual
- June 1, 2024
- HY-LITE
Table of Contents
HY-LITE DAGCrzW4pb0 Acrylic Block Windows User Manual
CLEANING INSTRUCTIONS Clean with a solution of MILD SOAP (LIQUID DISH
DETERGENT) AND WARM WATER ONLY!
Use a soft, clean cloth with light pressure to remove dust and dirt. Rinse
with clean water and dry by blotting with a cloth or chamois.
Grease, Oil, Tar and Uncured Paint can be removed using MV&P Naptha or
Kerosene on a soft
cloth. Afterward, clean window using instructions above to remove residue.
If dusting is necessary, use a damp, soft cloth to prevent scratching and
static build up on the blocks.
DO NOT USE “After Shower Sprays,
”
Window or Glass Cleaners, Abrasive or Scouring Cleaners
DO NOT USE Squeegees, Scouring Pads, Razor Blades,
Scrapers or Other Sharp Instruments
DO NOT Pressure Wash, Acid Wash, or Steam Clean the Window
LEAVE THE BUBBLE WRAP ON!
The window is shipped with bubble wrap on both sides to protect the blocks.
The wrap can be peeled back to inspect for damage, but should be replaced to
protect the window from scratches, mortar and
overspray during construction. Once construction is complete, the bubble wrap
can be removed.
FAILURE TO FOLLOW ALL OF THE ABOVE INSTRUCTIONS VOIDS ALL WARRANTIES SCRATCH REMOVAL AND BLOCK REPLACEMENT KITS ARE AVAILABLE