TIOEVO0003 TEVO Wireless Thermostat User Manual

TIOEVO0003 TEVO Wireless Thermostat

Enabling complete home heating control with intelligent adaptations for underfloor heating, radiator circuits, and hot water timer control. The Tio TEVO wireless thermostat is only compatible with the Tio wireless wiring center. A Tio multifunctional gateway is required to access the in-app smart features on this thermostat.

• Wireless wiring center – TIOEVO0003
• Gateway – TIOEVO0004

YOUR SMART LIFE JOURNEY BEGINS NOW

You can operate your system wirelessly using the SMARTLIFE app.

SYSTEM OVERVIEW

Your TEVO thermostat requires 2 AA batteries (not included).

ICON OVERVIEW

CONFIGURATION MENU

2. Timer      3. Thermostat & timer

|  1
2| System type| rA: Radiators UF: Underfloor| IF
3| Temperature calibration| -9°C to 9°C| 0
4| Dead band| 1°C to 5°C| 1
5| Lock screen| 0: All locks excluding the power button.

1: All lock

| 0
6| Sensor select| In: Internal Ext: External All: Dual| In
7| Max. settable temperature| 20°C to 45°C| 35°C
8| Min. settable

temperature

| 5°C to 20°C| 5°C
9| Temperature cut off| 20°C to 70°C| 45°C
10| Anti-frost temperature| 2°C to 10°C| 5°C
11| Display mode| 0: Room & set temperature

1: Set temperature only

| 0
12| Anti-freeze| 0: OFF 1: ON| 1
13| Frost protection| 0: OFF 1: ON| 0
14| Frost protection temperature set| 5°C to 30°C| 16°C

FACTORY DEFAULT PROGRAMS

Please familiarise yourself with the thermostat’s pre-programmed factory settings.

WIRELESS WIRING CENTRE

Only compatible with the TEVO series thermostats, the wireless wiring center is a central control point for multi-purpose systems.

Pairing your wiring center:

1. Power ON your wiring center.
2. Press and hold switch 2 until a red LED appears.
3. Navigate to the zone you would like to pair your thermostat with using the same switch.
4. Power OFF your thermostat and press both power and buttons for 7 seconds.
5. When the LCDs “—” this means that the thermostat is in active pairing mode. (The thermostat is searching for its active pairing zone)
6. If you have successfully paired your devices, the LCD will display the zone that it has paired with. H/W is channel 9.
7. Your thermostat pairing code is the large number found in the center of the screen and the zone number in the bottom right corner.

SELECTING YOUR OPERATING MODE

The desired functionality of the thermostat can be one of three options;

1. Turn the thermostat off by pressing it power .
2. Press and hold for 7 seconds to enter the configuration menu. The operating mode is configuration 1.
3. Use to cycle to the required configuration.
4. Then select between mode, , using .
5. Press to confirm your selection.

THERMOSTAT MODE

UFH or Radiator
The thermostat is factory-set to operate in UFH programming mode. If you wish to operate the radiators only and bring the boiler live without the UFH Pump and Valve:

1. Put the operating mode into 2.
2. Switch the system type into rA in configuration 2.

Manual Mode

1. To operate the thermostat as a simple up and down easy to use mode; and tap until the hand symbol appears .
2. Using   You can now set your designed temperature.
3. The thermostat will activate when the desired temperature is set higher than the room temperature. This is signified by the flame symbol   .

Programming Mode

When in programming mode, the screen will display the clock symbol in the bottom left-hand corner. To enter programming options:

1. Press and hold for 5 seconds.
2. Once in programming mode, press to sequence through each time and using to set your desired preferences;

TIMER OPERATION

Program mode: This setting will allow you to set up to 4 time periods, in which your heating demands will adjust. Hold mode: This setting allows you to set a timer duration for your hot water requirements. You can set a duration of up to 99 hours and 59 minutes. When the thermostat is in timer operation, the timer function symbol will display on the screen .

1. To set the function, press  and use it to select one of the AUTO, HOLD, or OFF options as required.
2. Press  to confirm your selection.

Program mode: When you select AUTO (programmable) mode press  and hold to enter program settings.

The order is Monday-Friday>

• Period 1 > Time ON > Time OFF>
• Period 2 > Time ON > Time OFF>
• Period 3 > Time ON > Time OFF>
• Period 4 > Time ON > Time OFF.

Hold mode:

• Tap to select HOLD.
• Using adjust your timer setting.
• Tap  to confirm your setting.

THERMOSTAT & HOT WATER TIMER OPERATION

Program mode:

1. Long press  for 7 seconds to select the thermostat function and H/W timer setting.
2. Short press  to confirm.

When in operation 3, after pairing the thermostat with the wiring center on channels 1-8, the H/W will also automatically pair.

HOLIDAY MODE

1. With the thermostat on, long press for 7 seconds to enter holiday mode.
2. Short press button to set the day and temperature parameters you need.
3. Press  to exit this. During holiday mode, the H/W timer is OFF.
4. To exit holiday mode, short press  .

SENSOR COMPATIBILITY

The TEVO thermostat can be connected with an external sensor.

WIRELESS GATEWAY

The wireless gateway will link the RF wiring centre to the TEVO thermostat through ZIGBEE protocols to enable app functionality. Utilizing the in-app features users have the ability to make adjustments from anywhere at any time. This unit is easy to install. Simply plug it in using the USB cable provided and follow the subsequent connection process.

PAIRING IN-APP
In order to access our thermostats app functionality, you will need to download and install the Smart Life app. The QR code below will take you directly to the download page.

Once installed, please proceed by registering your very own account. Please follow the on-screen instructions to complete the process. If you already have a registered account, please continue to the next step. You may use the email password retrieval system if you have forgotten your password.

1. Power ON your wireless gateway.
2. Turn your devices’ Bluetooth ON.
3. Long press until the blue light is stable and the red light is flashing.
4. The app will now automatically find your device.
5. If the app was unable to find your device, please manually select “Wireless Gateway (Zigbee) from the menu.

Follow the on-screen instructions to setup your device.

The key benefit of pairing to the Smart Life app through the gateway is that your settings will be stored within the cloud and in the event of a power outage your desired setting will remain in place.

Select 2.4 GHz Wi-Fi network and enter the password.

• You will now be asked to connect your device to the desired Wi-Fi band.
• Please note that after this step, you may be asked to complete a firmware update.
• Please proceed in doing so, as your gateway will need to be fully updated to access all current features.

To pair your thermostat with your wireless gateway:

1. Long press over 7 seconds with the thermostat ON. The thermostat will display “—”.
2. When on the gateway device screen on the Smart Life app, select Zigbee devices, press “Add devices” and select “Add new devices”.
3. The app will discover nearby devices.
4. You will be asked to add the device to your profile.
5. Please name your device to the zone or room it is allocated to.
6. Then press “Finish”.

APP CONFIGURATION
Once your thermostat has connected successfully, you can change the setting parameters as you require. If there is no connection between the thermostat and wiring centre or the codes do not match; the screen will display “Please match code”. Once paired correctly, the message will disappear.

APP CONFIGURATION

Your TEVO thermostat has multi-function capabilities. There are altering menu interfaces for you to familiarise yourself with to maximize it’s use.

Thermostat Function:
Here you can select your thermostat’s working hours and target temperature.

Timer Function: Here you can activate your thermostat’s timer functionality.

You can select your operating hours and the duration of heating on this menu screen.

Thermostat & H/W Timer Function: This setting utilises both the thermostat functionality and the timer capabilities of your thermostat. Managing both the target temperature and duration of heating.

IMPORTANT NOTES

1. Thermostat setting order : 1 Mon-Fri, Sat, Sun > Period 1 > Time ON > Time OFF (4 periods).
2. H/W setting order : 2 Mon-Fri, Sat, Sun > Period 1 > Time ON > Time OFF (4 periods).
3. Radiators: When you use the radiator system, there is no 3-pump utilization.
4. Underfloor Heating: When you select the UFH system, there 4 will be a pump output. The wiring center will have a 3-minute delay.
5. Anti-Freeze Function: When the thermostat detects a room temperature lower than or equal to 5°C, the thermostat will activate the heating. Once a room temperature of 8°C is detected, the heating will turn OFF.
6. Low battery alarm: The low battery icon will display when the battery is down to 10%. The icon will flash when the battery is down to 1%. At this stage, you should replace it with new batteries immediately, as the thermostat will stop functioning.
7. Error code: When the thermostat sensor is broken or has a 7 problem, the LCD will display “ERR”.
8. A wireless gateway is needed for app control functionality.

VOICE CONTROL
Select icon to access the settings menu. You can now access both Alexa and Google Assistant under the “Third-Party Control” tab. Please note that the compatibility and connection between the Smart Life app and third-party voice control platforms is facilitated via Smart Life and not Tio Climate Solutions Ltd.

• www.tioclimatesolutions.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>