Govee H605C RGBIC TV Backlight User Manual
- June 3, 2024
- Govee
Table of Contents
Govee H605C RGBIC TV Backlight
Safety Instructions
Read and follow all the safety instructions:
- Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
- When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s lifespan.
- Remove nails, metal, or other conductive objects from the installation surface before attaching the strip lights, as it may cause short-circuiting.
- Do not install the strip lights near any heat sources.
- Do not allow children to install the strip lights alone.
- Avoid installing the strip lights near potentially dangerous sources (e.g., candles, liquid-filled objects)
Introduction
Thanks for choosing Govee TV Backlight. This product will significantly improve your watching experience with the specially designed two cameras installed on the top center of the monitor that captures the screen color and synchronizes it to the light bars behind the TV in real time, bringing you an extraordinary watching atmosphere.
What You Get
- LED Strip Lights 1
- Adapter 1
- Control Box 1
- Camera 1
- User Manual 1
- Service Card 1
At a Glance
- On/Off Button: Press to turn On/Off.
- Color Button: Press to adjust the color.
- Music/Dimmer: Press to enter Music mode.
- Button : Long press to adjust the brightness.
- Indicator Light:
1. A red light indicates the device is not connected to the network.
2. A blue light indicates the device has successfully connected to the network.
3. No light indicates the device is not powered on or malfunctioning.Installing Your Device
- Preparation Before Installing:
- Unbox the strip lights and check all items listed in the packing list.
- Power on the strip lights and check whether they light up.
- Installing Steps:
1. Wipe the installation surface to ensure it is dry and clean.
2. Stick the strip lights to the back of the TV. Press them firmly and then reinforce them with the provided clips. 
3. Position the camera to the top-center of the TV.
4. Insert the cable of the strip lights and the camera into the control box. (Type-C/DC)
5. Ensure that the control box is in a proper position near your TV.
6. Power on the strip lights and try connecting them with the Govee Home app.Pairing Your Device with the Govee Home App
What you need:
Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not
supported. 0 Download the Govee Home app from the App Store (iOS devices) or
Google Play (Android devices).
- Turn on the Bluetooth in your smartphone.
- Open the app, tap the”+” icon in the top right corner and search “H605C”.
- Tap the device icon and follow the onscreen instructions to complete pairing.
Calibrating the Camera with the Govee Home App
- Mount the camera to the center of the screen.
- Stick the form stickers to the 7 calibration points on the screen.
- Open Govee Home App and click to enter the page of H605C. Enter the settings page and click “Calibration”. Follow the in-app instructions to complete the calibration.
Tips:
- Drag the calibration points on the app screen to the locations of corresponding orange foam stickers.
- The red calibration points are the same one orange foam sticker in two different cameras.
The picture will distort under the fish-eye camera. Ensure the calibration points are chosen correctly and the calibration lines do not overlap or cross each other.
Controlling the Device with Your Voice
- Open the app, then tap the device icon to enter detail page.
- Tap the setting icon in the top right corner.
- Select Using Guidance and follow on-screen instructions to control the device using your voice.
Specifications
| Power Input (Adapter) | 100-240VAC 50/60Hz |
|---|---|
| Power Input (Control Box) | 12VDC 3A (55-65inch) |
12VDC 4A (75-SSinch)
Light Displaying Technology| RGBIC
Control Method| App, Control Box, Voice Control
Troubleshooting
- The strip lights do not light up.
- Check all wired connections. Unplug and Re-plug the power adapter and the DC port to ensure the control box powers on correctly. The strip lights will light up 1 Os after being powered on.
- Ensure the strip lights are plugged into the LED port before they are powered on.
- If you unplugged the strip lights, reboot the power adapter after the lights are working correctly.
- Calibration failed.
- Calibrate the strip lights again.
- Ensure no other strong lights are affecting the camera.
- Calibration points must be chosen correctly. For example, the top calibration point on your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross each other.
- Calibration can only begin after the strip lights are successfully connected to Wi-Fi.
- The provided adhesives don’t stick well.
- Wipe the installation surface to ensure it is dry and clean.
- When attaching the strip lights, ensure you press down firmly.
- Reinforce the strip lights with the provided clips or other strong adhesives.
- Calibration and picture upload failure
- With your smartphone, check whether the Wi-Fi connection is stable.
- Wi-Fi connection failure
- Do not skip the Wi-Fi connecting step during setup. Ensure you input the correct Wi-Fi name and password according to the app instructions.
- 5GHz Wi-Fi is not supported. Connect the strip lights to a 2.4G Wi-Fi band then reboot your router.
- With your smartphone, check whether the Wi-Fi connection is stable.
- The strip lights are not compatible with the Wi-Fi name or password. Please change the Wi-Fi name and password.
- The strip lights are not compatible with your router. Please try to connect your strip lights to a smartphone hotspot.
Customer Service
Warranty: 12-Month Limited Warranty
- Support : Lifetime Technical Support
- Email:support@govee.com
- Official Website:www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>