air avionics 2BFKKAC1 AC-1 VHF Air Band Radio Instruction Manual
- June 1, 2024
- air avionics
Table of Contents
air avionics 2BFKKAC1 AC-1 VHF Air Band Radio
Product Information
Specifications
- Product Marketing Name: AC-1 VHF Air Band Radio for Aircraft Installation
- Description: VHF Air Band Radio designed for aircraft installation
- Compliance: FCC and ISED radiation exposure limits
- Minimum Distance: 20cm between radiator and body
- Manufacturer: Garrecht Avionik GmbH
Product Usage Instructions
Installation
- Ensure the aircraft’s power source is turned off before installation.
- Mount the VHF Air Band Radio in a suitable location within the aircraft, following the provided installation manual.
- Connect the necessary antennas and power cables according to the installation manual.
- Perform a thorough check of the installation to ensure all connections are secure.
Operation
- Power on the VHF Air Band Radio using the designated power switch.
- Tune the radio to the desired frequency using the provided controls.
- Adjust volume and squelch settings as needed for clear communication.
- Follow all aviation regulations and protocols when using the radio for communication.
Maintenance
- Regularly inspect the radio for any signs of damage or wear.
- Keep the radio clean and free from dust or debris that may affect performance.
- Refer to the user manual for specific maintenance tasks and schedules recommended by the manufacturer.
FAQ
Q: What should I do if I encounter interference while using the VHF Air Band Radio?
A: If you experience interference, try adjusting the radio’s position or antenna to minimize external disruptions. Ensure that no other electronic devices are causing interference.
Q: Can I use the VHF Air Band Radio in conjunction with other transmitters?
A: No, the VHF Air Band Radio should not be operated in conjunction with any other antenna or transmitter to avoid radiofrequency radiation exposure issues.
Applies to:
- Product Marketing Name: AC-1
- Description: VHF Air Band Radio for Aircraft Installation
FCC
§15.19 & RSS GEN/CNR-GEN, 8.4 – FCC and ISED Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Changes or modifications
Changes or modifications made to this equipment not expressly approved by Garrecht Avionik GmbH may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure Information
This equipment complies with FCC and ISED radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>