Vibe sound DG-478 Portable Stereo Bluetooth Speaker User Manual
- June 12, 2024
- Vibe sound
Table of Contents
Vibe sound DG-478 Portable Stereo Bluetooth Speaker
Thank you for purchasing the Portable Stereo Bluetooth” Speaker. Please read all instructions carefully before using and retain lhis manual for future use and reference.
PACKAGE CONTENTS
- Portable stereo Bluetooth’ Speaker
- US B Charging Coble
- AUX Coble
KEY FEATURES
- Play music wireless
- Media shortcut keys
- Rechargeable 61hium-ion battery
- Built-in microphone and answer button
SAFETY INSTRUCTIONS
- Keep lhe unit away from heat sources, direct sun, light, humidity, water, and any other liquids.
- Do not operate the unit ot it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been stopped or damaged in any way.
- Repairs to electrical equipment should on be performed by a quality electrician. Improper repairs may place the user ot serious risk.
- Do not puncture or horn the exterior surface of the product in any way.
- Keep the unit free from dust, lint, etc.
- Do not use this unit for anything,g other than its intended use or purpose. Doin,g so may dama,ge the device. This product is not a toy. Keep out of reach of children.
- Do not use the headset at excessive levels as this may damage hearing.
- Do not expose batteries, battery packs, or batteries installed to excessive heat, such as direct sunlight, or open flame.
FEATURES
- On/off
- DC S>
- AUXinput
- Built-in mic
- Vol+/ forward track
- Vol -/ Previous track
- Play/Pause/Answering/Ending/Rejecting a call
PAIRING YOUR SPEAKER
Your speaker will work best if it is within 33 ft. of your sensor device. You may experience sound briefly cutting,g off if you are out of range or if ymx wireless connection is weak: Make sure Bluetooth is enabled on your snort phone or tablet before starting the pairing process. Turn on the speaker by flipping the Power Switch to the “On” position. The speaker will “beep” when it is ready to connect.
From your smartphone or fable!, find a list of nearby devices and choose ‘”DG-478″. Enter “COXr’ if asked. The speaker will “beep” again when the pairing is complete!
To have your Speaker pair autonnotcally to this device when in pairing mode and range, you can select “Don’t ask this again.”
NOTE : The screenshot above is typical of many Bluetooth”-enabled phones at the moment today. and re-used to assist in the explanation of the pairing process, Your mobile phone’s interface and interaction with the Bluefoolh” Speaker may differ slightly from the illustration above,
USING YOUR BLUETOOTH” SPEAKER
Powering Your Speaker On/Off
- Ta furn your speaker press the Power button. The LED light will flash quickly. When your device is connected to the speaker success {, the LED ight will flash once every few seconds.
- To tum your speaker off, press the Power The LED light will power itself off.
Answering/Ending a Call
- To answer quickly press the MODE button,
- To end o coll, quickly press lhe MODE button
Adjusting Volume
- Press and hold the Vol+ and Vol – buttons to oo;ust volume during a call or while /’l’Mic ploying,
NOTE : You may also adjust the volume from your mobile phone’s volume contr
Making a Call
- Dial the number from your mobile device and press the Send or Coll button. The call will automatically transfer to speaker
Redialing the Last Number
- Quickly press the MODE button twice. The last number dialed from your mobile device Will be dialed. Rejecting Calls
- To reject an incoming call, press and hold the MODE button for 3 seconds. The call Will disconnect from your mobile device.
STEREO BLUETOOTH
This speaker allows you to listen to and control the music on your Bluetooth-
enabled mobile phone, computer, or mp3 player in full stereo. It supports the
following profiles:
- A2DP: Advanced Audio Distribution Profile
- AVRCP: Audio/Video Remote Control
- HSP: Headset Profile
- HFP: Hands-Free Profile
To use the speaker to listen to/control music, your Bluetooth-enabled device must support the A2DP and AVRCP profiles. Please refer to the user guide of your Bluetooth-enabled device for more information.
PLAYING MUSIC
- To enjoy wireless music on your Portable Stereo
- Bluetooth@Speaker, make sure you are connected to a Bluetooth@-enabled media device. Once connected, you can press PLAY on your Bluetooth@device or you can press the MODE button on the DG-478 Bluetooth@ Speaker Bar.
- Once playback has EEgun, you can control the music or answer phone calls from the control buttons on the Speaker.
- Please note, not all mobile phones support the control of music using Bluetooth.
NOTE : Most media-enabled smartphones will display “connected to phone audio and media” when connecting to the Bluetooth@ Speaker. This means you can make phone calls and enjoy your music.
Play/Pause
- Press the MODE button to pause the music. To resume music Dlavback, press the MODE button again.
Skipping Tracks
(Not available on all phones)
- Press the Vol – once to skip to the previous track.
- Press the Vol + once to skip to the next track.
USING AS A WIRED SPEAKER
The DG-478 can be used as a wired speaker by using an auxiliary cable. This cable is not included with your speaker.
1. Plug one side of the auxiliary cord into the AUX jack of your device.
2. Plug the other end of the auxiliary cable into the 3.5mm AUX jack on the
speaker.
3. Using your media device’s music controls, you can control music and adjust
the volume.
NOTE : When connected via AUX cable to your speaker, only the Vd + and VoI – buttons work on the speaker. To skip to the previous or next track, you will need to use the controls of your audio device. For Bluetooth@devices to communicate with one another properly, they must utilize the same Bluetooth@profile. To determine the profiles supported by your device, please refer to the device’s user guide. Certain Bluetooth@features including those listed may not be supported by all compatible Bluetooth@-enabled devices and/or the functionality of such features may be limited with certain devices.
SPECIFICATIONS
- Bluetooth@ Version: V5.1
- Bluetooth frequency: 2.4GHz
- Battery capacity: 400mAh
- Play Time: Up to 2 hours
- Operating Range: up to 33 feet (10m)
- Charging Interface: Micro USB (included)
- Optional AUX (included)
- Battery: Built-in Lithium-ion
TROUBLESHOOTING
Please refer to the view of the below frequently asked question (1)to see if these basic troubleshooting tips help solve your problems.
- I can pair the Bluetooth Speaker with my Bluetooth device, but I cannot hear any music.
- Make sure your device supports the A2DP profile
- I cannot get the Bluetooth Speaker into pairing mode.
- Make sure the Bluetooth@ Speaker is turned off before beginning the pairing process. Slide the power switch to the On position and wait for the LED light to flash blue six times quickly. Quickly press theMODE button after this, and the LED light will altemately flash red and blue. My mobile phone is not able to pair with the Bluetooth Speaker Pod.
- Make sure that you fully charged the speaker before use.
- Keep your BluetoothØ Speaker and mobile phone within 33 feet of each other during the pairing process. Check that your phone’s Bluetooth is enabled. Try repeating the pairing process.
MAINTENANCE
Power this product off when not in use. DO NOT expose this product to water or liquid. DO NOT use abrasive cleaning solvents to clean this speaker. Clean with a dry cloth if necessary. If you are not using the speaker for a long period. store in a dry, safe location. Charge the speaker every 2 months when in storage to maintain battery life. on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product’s fitness for use, in the event of damage caused by chemical or electrochemical effects, by water,r or generally from abnormal conditions.
- The warranty will be FEformed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. VibeTM reserves the right to exchange the product for a replacement product of equal value if the product sent in cannot be repaired within a reasonable time or at a reasonable cost. Requests cannot be made for repairs to be carried out on-site. Parts that have been replaced or exchanged become our property.
- The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our product.
- Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product.
- Any other further claims are excluded. especially those for replacement due to damage caused to the outside of the product, provided there is no obligatory legal liability. we, therefore, accept no liability for accidental, indirect, or other consequential damage of any kind, which leads to usage restrictions, data loss, and loss of earnings or interruption to business
Asserting a warranty claim:
- To make use of the warranty service for hardware issues, you must contact the VibeTM Service Center by email at support@dglusa.com
- VibeTM will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and will be asked to send the product to VlbeTM.
IMPORTANT : VibeTM will only accept parcels that have an RMA number.
Please observe the following when sending the product:
- Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the product (cables, chargers. manuals, etc.) unless the VibeTM Service Center specifies otherwise.
- Mark the RMA number on the outside of the package in such a way that it is visible and legible.
- You must enclose a copy of the sales slip as proof of purchase.
- Once VibeTM has received the product, it will meet its warranty obligations by the warranty conditions and will return the product to the sender with carriage and insurance paid. Service outside of warranty VibeTM can refuse any service claim made that is not covered by the warranty. If VibeTM agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs. VibeTM will not accept any packages that have not first been approved by Vibe TM using an RMA (Return Material Authorization).
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the responsible for compliance could void the user’s authority to operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Distributed by DGL Group, LTD. 2045 Lincoln Hwy. 3rd Floor, Edison, NJ, 08817, USA. www.dglusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>