Imose Zedon X-Pro 11.6 Inch Laptop User Manual
- June 1, 2024
- Imose
Table of Contents
Imose Zedon X-Pro 11.6 Inch Laptop
Specifications
- Model Name: Zedon X-Pro
- System Type: x64-Based PC
- Processor: 12th Gen Intel Core i5
Getting Started
- Step 1. Unbox your notebook.
- Step 2. Connect the power (the battery is already installed inside the notebook). Please charge the battery before switching the device on for the first time of use.
- Step 3. Press the power button to turn on the notebook.
- Step 4. Configure Windows 11 by following the instructions on the notebook screen.
- Step 5. Activate Windows OS by opening the Control Panel, selecting System and Security, and then selecting System Windows Activation activate Windows.
Power Off Notebook
To switch off your notebook, please do one of the following:
- Press and hold the power button for a while.
- Click on the Start menu, click on Power, then select Shutdown.
Contact Us:
For after-sales support, feedback, or further inquiries, kindly reach out
to us via email at imose.online@gmail.com or
through our website: www.imosemobile.com.
Buttons & Ports
Front View
- Integrated Camera
- System Status
- Touch Pad
- Power Button
Bottom View
- Speaker I
- Speaker II
Right Side View
- USB 3.0 Port
- USB 3.0 Port
- Earphone Port
- TF Card Slot
Left Side View
- Kensington Keyhole
- DC Port
- USB 3.0 Port
- HDMI Port
- Type C data only
Getting Started
Step 1.
Move up the notebook screen with a maximum angle of 145° from the keyboard
base.
Step 2.
Connect the power (the battery already installed inside the notebook). Please
charge the battery before switching the device on for the first time of use.
Step 3.
Press the power button .
Step 4.
Configure Windows 11 by following the instructions on the notebook screen.
Step 5.
Activate Windows OS, Open Control Panel, select System and Security, and then
select System Windows Activation Activate window.
Power Off Notebook
To switch off your notebook, please do one of the following:
- Press and hold the power button for a while.
- Click on the start menu
- click on power
- then select shut down
Specificatons
- Model Name: Zedon X-Pro
- System Type : x64-Based PC
To check your notebook specification, please do one of the following:
- Open the Control Panel, select System and Security, and then select System.
- Type System information in the search bar below.
Contact Us
For after-sales support, feedback, or further inquiries kindly reach out to
us by email: imose.online@gmail.com or
through our
website: www.imosemobile.com
FCC
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Specific Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health. FCC RF
Exposure Information and Statement The SAR limit of the USA (FCC) is 1.6 W/kg
averaging over one gram of tissue. Device types: This device has also been
tested against this SAR limit.
This device was tested for typical body-worn operations with the back of the This device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of This device. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided. FAQ
How can I check my notebook’s specifications?
To check your notebook’s specifications, you can either open the Control
Panel, select System and Security, and then select System or type “System
information” in the search bar below.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>