O haitai K1 High Quality Life Ear Picking Enjoyment User Manual

O haitai K1 High Quality Life Ear Picking Enjoyment

Product Information

Specifications:

• Weight: 60g
• Wireless Standard: IEEE802.11b/g
• Frequency: 2.4GHz
• Camera Resolution: 20fps CMOS
• Operating Temperature: -10°C to 45°C
• Battery Capacity: 200mAh
• Charging Time: 60 minutes
• Usage Time: 45 minutes
• Power Input: DC 5V 0.3A
• Audio Port: 3.5mm
• Operating Range: 15-20 meters
• Dimensions: 136.5mm x 39mm

Product Usage Instructions

1. Charge the device using the provided charger for 60 minutes before first use.
2. Turn on the device by pressing the power button for a few seconds.
3. Connect your smartphone or tablet to the device’s WiFi network named “APP WIFI”.
4. Open the designated app on your mobile device to access the camera feed.
5. You can now use the camera to capture images or videos within the operating range.
6. After usage, turn off the device and recharge it for the next use.

Troubleshooting:
If you encounter any issues with the product, refer to the troubleshooting section in the user manual for guidance on resolving common problems.

FAQ

Q: How long does the battery last on a full charge?

A: The battery provides approximately 45 minutes of continuous usage on a full charge.

Q: How far is the operating range of the device?

A: The device has an operating range of 15-20 meters from the connected mobile device.

Q: Can I use the device without connecting to the app?

A: No, the device requires a connection to the designated app for camera functionality.

High-quality life, ear-picking enjoyment

Open O’haitai App

1. Enable scanning OR code download app
2. Open APP Enter WIFI connection operation
3. Long press the power button Open the ear-picking rod

Connect product wifi

1. Profile connectivity product WIFI choice “HBY_***
2. Return to the operation interface Click on “Start”
3. Enter the ear pick ng operation interface

Replace the silicone sleeve of the ear spoon

Product Accessories

1. Several silicone ear spoons Smooth ear picking without damaging the ear
2. Charging cable x1

Product size

Troubleshooting

Hazardous substances

This table is prepared under the provisions of SJ.T 11365

• O: Indicates that the content of the harmful substance in all hon generous materials of the component is below the limit requirements specified In GB T26573 2012
• X: indicates that: the content of the hazardous substance in at least one homogeneous material of the component exchanges in limit requirements specified in GB/T26573 2012.

Product Parameters

• Brand O haitai
• Product Name Smart visual ear pick
• Product model K1
• Host weight 60g
• Network standards IEEE 802.11b/g/n
• Antenna internat antenna
• Working frequency 2 4Ghz
• Image transmission rate 20fps
• Image sensor CMOS
• Working environment temperature – 10 ∼ 45 °C

Important Note

1. When cleaning Ihe lens, it is recommended to use a professional alcohol cotton swab to wipe it carefully.
2. Before use, please observe the surroundings and do not use the product in an environment where people are running, to avoid impact.
3. This product is not suitable for use by children under the age of 3.
4. Children are prohibited from using this product alone to avoid accidental injury.
5. Do not use the host body in liquid to avoid damage caused by immersion.
6. The product is equipped with a built-in polymer battery, which must be charged once a month if not frequently used.
7. Please use a 5V charger to charge the device. It is prohibited to use this device while it is charging.
8. Avoid exposing the product to direct sunlight to avoid softening
9. When using, the product temperature may slightly increase (up to 10 35 °), please rest assured of use.

After-sales warranty

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and usedbyh the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>