daomim T730Q True Wireless Earbuds Instruction Manual
- June 1, 2024
- daomim
Table of Contents
KTIXDEBUD2 /T730Q
True Wireless Earbuds
Product Diagram
- Multi-function Touch area
- Earbuds Function Indicator LED
- Microphone
- Charging Pins
- Ear tips
- Digitial Indicator of RH earbud/Battery case/LH earbud
- LED Charging Indicator (Case)
- USB Charging Port (Type-C)
- Charging Cable (Type-C)
Charging
Fully charge both the earbuds and the charging case before the first use.
– Tear off the transparent sticker on the charging pin of the earbuds
– Use wirelss charging or USB-C charging cable
– To prevent damage, use the provided usb-c cable
– Fully dry off the earbuds and the usb port before charging
Put the Charging Case into the wireless charger (notincluded) and it will be charged.
Charging Earbuds
Align the Charging Pins on the earbuds with those in the case, then place the
earbuds into the case until it magnetically snaps into the Charging Slot.
Option 1: Place the battery case on the wireless charging pad
Connect the Charging Case to a compatible adapter(not included) with the
Type-c Cable, then plug the adapter into a socket.
Option 2: Charge with USB-C cable
Weraring
- Insert the earbuds into the inner canal of your ears. –
- Turn and find the most comfortable position.
- Get a confident and satisfying fit in only 3 steps. For the best call quality, ensure the microphone is directed towards your mouth.
Powering On/Off
- The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.
- TO manually power on, Long press and hold Multi-function button 3 seconds on either one of the earbuds.
- To manually power off, long press and hold the multi-function button on either one of the earbuds for 10 seconds.
LED indicators (Earbuds)
| Power on | White LED flashes quickly 5s, then turn to blue LED falshes slowly |
|---|---|
| Power off | Solid blue LED 6s then light off |
Pairing
-
True Wireless Stereo Connection
Taking the left earbud and right earbud out of the charging case together, the right earbud will automatically connect with the left earbud. -
Bluetooth Device Connection
The earbuds will automatically enter pairing mode when powered on. Please make sure to open the device bluetooth mode, then you can connect earbuds by choosing ‘KTIXDEBUD2’ at bluetooth list of deivce. -
Using Mono Earbud
Taking the left earbud or right earbud out of the charging case, after powering on, you can also connect the left earbud or right earbud by choosing ‘KTIXDEBUD2’ at bluetooth list of device. When you use mono earbud, take another earbud out of the charging case, they will automatically connect to stereo mode.
| Paring mode | LED indicator on the main earbuds flashes blue quickly. |
|---|---|
| Connected Successfully | LED indicator on the earbuds pulse blue for every 8 |
seconds.
Note:
Remove the earbuds from the charging case at the same time (within 2 seconds),
and the right ear will automatically connect to the left earphone.
Controls
- Pinch the Multi-function area with two fingers.
- : hold the multi-fuction area
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.
- Please turn the device bluetooth mode off or delete the connection record of the earbuds from the device bluetooth list.
- Take the left earbud and right earbud out of the charging case together, then the earbuds will power on and enter pairing mode.
- Touch the left or right earbud 5 times to enter pairing mode again.
- After resetting the earbuds, the pairing record of the earbuds will all clear and you can re-pair bluetooth with the device.
Specifications
Input| 5V ****0.5A|
---|---|---
Battery Capacity| Earbuds:35mAh| Charging Case: 400mAh
Charging time| Earbuds: 1.5 hrs| Charging Case: 2 hrs
Playtime
| (Varies by volume level and content) | 7hrs+20hrs(with charging case) |
|---|---|
| Driver size | 13mm x 2 |
| Frequency response | 20Hz-20kHz |
| Impedance | 32Ω + 15% |
| Bluetooth version | V5.3 |
| Audio code format | SBC, AAC |
| Bluetooth range | 10m/33ft |
Caution
Only certified technicians are qualified to repair your device. In calling
upon non-qualified persons to repair your product, you run the risk of
damaging your device and voiding your warranty.
Only use the accessories that are certified by manufacturer. The use of
incompatible accessories with the device, such as batteries and charger, can
cause injury or damage your device.
Disposal and recycling
Correct disposal of the product.
This product contains substances that are potentially dangerous to the
environment and to human health. Therefore, you should hand it over to the
applicable collection point for the recycling.
Correct disposal of the batteries.
If your product contains a detachable battery pack. you should only dispose it
in a designated collection point for used batteries.
WARNING: Cancer and Reproductive Harm-www.P65Warnings.ca.gov
Battery and charger caution
This device is equipped with a Lithium-ion or Lithium-ion polymer battery.
Risk of explosion if battery is replaced by an incorrect type.
-Do not pierce, open, disassemble the battery, or use it in a humid and / or corrosive environment. If there is a battery leak, do not let liquid touch skin or eyes. If this happen, immediately flush the affected areas with water or ask for medical help.
-Do not expose the battery to temperatures over 45C (113F).
-Do not dispose of batteries in a fire as they may explode. Obey local regulations.
Recycle when possible.
-Be careful to never crush or perforate the battery. Avoid exposing the battery to high external pressure which could provoke an internal short-circuit and overheating.
Avoiding hearing damage.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a class
B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCCRules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipmentgenerates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmfulinterference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If thisequipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, theuser is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be u sed in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>