tuya B46 Broken Bridge Aluminum Smart Lock

1. Introduction

In view of the security and modern management needs of residential, office and intelligent communities, we launched the fingerprint + card+ password door lock module. Using advanced fingerprint identification, contactless card swiping and password as the door key, and has a variety of door opening modes to choose from, more flexible, more convenient, more secure!

The addition and deletion of administrators and ordinary users adopts the management method based on the unlocking number. The corresponding number can be fingerprint, password, card, fingerprint, remote control
(optional). The deletion user can directly input the user information to delete.

password
domestic consumer| 291| 10~300| The average user can be a fingerprint (up to 100), card, password or shake control

2. Product Advanced and Characteristics

• You can open your doors using your fingerprints, cards, and passwords
• Support remote control door opening, efficient and convenient
• A variety of open door modes are optional, strengthening the security level of the door lock
• The addition and deletion of users adopts a number-based management method
• Combination of unlocking, double function, so that the door lock security is more guaranteed
• Has the function of preventing others from peeping at the password
• Booon self-inspection, intelligent identification function module, quick matching function, such as fingerprint + password or card + password with unlock record query function, always grasp the use of the door lock
• All the components are using the international famous brand products, stable and reliable quality.
• Door lock module are waterproof, moisture-proof, mildew proof treatment,
• The door lock module has been tested at high and low temperature, vibration and aging to adapt to the harsh environment.

3. Technical Parameter

users)
Number of open
-door chips| <=300 groups (9 administrators, 291 users)
Number of open doors| <=300 groups (9 administrators, 291 users)
Refusal rate:| ≤0.15%
False rate:| ≤0.00004%
---|---
working temperature:| -10 ℃~60 ℃
relative humidity:| 20% ~ 93%

4. Function and Operation

1. Initial state

The factory engineering password is “123456” can open the door.
After entering the administrator information, the project password “123456” will be automatically deleted.

2. General provisions of operation

We will enter the management fingerprint, management password, or management card collectively known as the verification administrator.

Enter the administrato

“#” Key is a confirmation key or a menu function key
“*” Key is clear key / back key. Enter the password

3. Enter the door lock function managent

Light up the touch screen + press the “*#”

Press the Set setting key ____Verify that the administrator

In the initial state, after lighting the touch screen, press “* + #” or directly press the “Set” setting button in the back panel to prompt the administrator, voice broadcast: “Add administrator”, “Please enter the fingerprint, card or password to add”. After adding successfully, automatically enter the door lock management function, voice broadcast:

“Number 001 add success”, “1 add user”, “2 delete user”, “3 door lock Settings”, “4 add administrator”. Press the “#” key to repeat the voice broadcast

After entering the administrator, after lighting up the touch screen, press “*

• ” (or directly press the “Set” Settings button in the back panel), enter

  the administrator verification state, voice broadcast after operation: “Please verify the administrator”, the administrator verification success, door lock function management, voice broadcast: “administrator verification success”, “1 add user,” “,” 2 delete user “,” 3 door lock Settings “and” 4 add administrator “. Press the “#” key to repeat the voice broadcast

Note: Before entering the administrator information, the initial password (123456) can be used to open the door. After inputting the administrator information, the initial password will automatically fail

4. Administrator Setting

Administrator setting includes input administrator, delete administrator, administrator information can be input fingerprint, card, password, after entering the door lock function management, follow the voice prompt operation.

Order to input the administrator information

Voice broadcast order:

1: Voice broadcast: “Administrator verification success” “1 add user” “2 delete user” “3 door lock Settings” “4 Add administrator” select 4 add administrator
2: Voice broadcast: “Please enter the fingerprint, card or password to be added”, enter the administrator information to be entered, and follow the voice prompt

3: Voice broadcast: ignore

Note: During the input process, the input information cannot be input, and the password number is 6 to 12 digits Order to delete the administrator information

1. Delete by the number Voice broadcast order:

1: Voice broadcast: “Administrator verification success” “1 Add user” “2 Delete user” “3 door lock Settings” “4 Add administrator” Select 2 delete user
2: Voice broadcast: “Please enter the number, fingerprint, card, password or remote control to be deleted”, enter the administrator information to be deleted, and press “#” to confirm the deletion
3: Voice broadcast: “Delete the number XXX, please confirm” press “#” to delete the designated administrator, press “*” to give up

4: Voice broadcast: ignore

6. Ordinary User Setting

Ordinary user Settings include inputting ordinary users and deleting ordinary user information. Ordinary user information can be input into fingerprint, card, password, remote control (optional). After entering the door lock function management, operate according to the voice prompt.

To input ordinary user information

Voice broadcast order:

1: Voice broadcast: “Administrator verification success” “1 add user” “2 delete user” “3 door lock Settings” “4 Add administrator”
2: Voice broadcast: “Please enter the fingerprint, card, password or remote control to be added.” Please enter the user information to be entered, and follow the voice prompt
3: Voice broadcast: ignore

Note: During the input process, the input information cannot be input, and the password number is 6 to 12 digits

Order to delete ordinary user information

1. Delete by the number Voice broadcast order:

1: Voice broadcast: “Administrator verification success” “1 Add user” “2 Delete user” “3 door lock Settings” “4 Add administrator” Select 2 delete user
2: Voice broadcast: “Please enter the number, fingerprint, card, password or remote control to be deleted”, enter the user number to be deleted, and press “#” to confirm

3: Voice broadcast: “Delete the number XXX, please confirm” press “#” to confirm to delete the specified user, press “*” to abandon 4: Voice broadcast: ignore

Note: The deletion number is optional only if the number is valid

2. Delete all users Voice broadcast order:

1: Voice broadcast: “Administrator verification success” “1 Add user” “2 Delete user” “3 door lock Settings” “4 Add administrator” Select 2 delete user
2: Voice broadcast: “Please enter the number, fingerprint, card, password or remote control to delete”, enter 000, and press “#” to confirm
3: Voice broadcast: “Delete all users, please confirm” press “#” to confirm to delete all users, press “*” to give up
4: Voice broadcast: ignore

7. Door Lock Setting

Function options include function setting, volume adjustment, language setting and time setting. After entering the door lock function management, follow the voice prompt

Make the function setting

Voice broadcast order:

1: Voice broadcast: “1 function Settings”, “2 volume adjustment”, “3 language Settings”, “4, time Settings” select 1 work Can set up, and press the voice prompt operation
2: Voice broadcast: “1 on (or off) normally open mode” “2 on (or off) double verification” “3 on (or off) anti-skid alarm” “4 on (or off) silent mode”
3: Voice broadcast: ignore

pour:

1. Each function is set to be on or off. If the last state is off, the voice prompt is on; otherwise, prompt off.
2. After the open mode, open the lock each time and press “#” to lock.
3. Note: In the combined unlocking mode, any two groups of non-administrator unlocking information with different numbers can be combined to unlock the locks.

Adjust the volume

Voice broadcast order:

1: Voice broadcast: “1 function Settings”, “2 volume adjustment”, “3 language Settings”, “4, time Settings” select 2 voice adjustment, and press the voice prompt operation
2: Voice broadcast: “1 volume” “2 volume”
3: Voice broadcast: ignore

Make the language setting

Voice broadcast order:

1: Voice broadcast: “1 function Settings”, “2 volume adjustment”, “3 language Settings”, “4, time Settings” Select 3 language Settings, and press the voice prompt operation
2: Voice broadcast: “1 Chinese” and “2 English”
3: Voice broadcast: ignore

Make time setting Voice broadcast order:

1: Voice broadcast: “1 function Settings”, “2 volume adjustment”, “3 language Settings”, “4 time Settings” select the time setting, and press the voice prompt operation
2: Voice broadcast: ignore
3: Voice broadcast: ignore

8. Restore the Factory Setting

Long press the “Erase” in the back panel for 5 seconds, the system enters the state of restoring factory setting. All unlocking information and records will be emptied. After success, the initial password will be restored to 123456 (for unlocking administrator verification).

9. Other Instruction

• I input the wrong password more than 5 times in 5 minutes, the keyboard is locked for 90s, and the system does not respond to any within 90s Password anti-peep function: enter the password in the following way: XXX password XXX; can be in Add some irrelevant code before and after the password, and then press # to confirm. The password must be included in what you have entered.
• Each operation for more than 12 seconds without the action system will automatically exit
• After the voltage is lower than 4.8V, there will be a low voltage alarm for each lock. After the alarm, the door lock can be unlocked 200 times, exceeding the alarm

Do not unlock the lock after the times until the voltage value is greater than 4.8V. Please replace the new battery after the low voltage alarm.

Specifications:

• Door Opening Key Type:

  • Conservator: 1~9 users
  • Domestic Consumer: 10~300 users

• Administrator Options: Fingerprint, card, or password

• User Options: Fingerprint (up to 100), card, password, shake control

• Power Supply: 4.5V-6.5V (4 dry batteries)

• Features: Waterproof, moisture-proof, mildew-proof; Tested for high and low temperatures, vibration, and aging

FAQ:

Q: Can I add multiple fingerprints for one user?

A: Yes, each user can register up to 100 fingerprints for access.

Q: What happens if the batteries run out?

A: Replace the batteries with new ones to continue using the door lock.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>