Corbett Lighting 354-02-VGL Mirielle Wall Sconce Instruction Manual
- June 13, 2024
- Corbett Lighting
Table of Contents
Corbett Lighting 354-02-VGL Mirielle Wall Sconce
Product Information
- Brand: Hudson Valley Lighting Group
- Product Models: Hudson Valley Lighting, Troy Lighting, Mitzi, Corbett Lighting
- Fixture Model: Mirielle
- Fixture Type: Ceiling Light
- Maximum Wattage: 5 Watts LED
- Lamp Type: G9 Lamp
- Replacement Part Name: Hardware Kit
- Replacement Part Numbers: HDW-5, SCR-5, GAS-5-L, GAS-5-S
Product Usage Instructions
- Mounting the Fixture:
- Use the provided Mounting Plate (A) and secure it using the Mounting Screws (B).
- Ensure proper grounding by connecting the Ground Screw (C) to the Mounting Plate (A). Never connect the ground wire to the hot wire to prevent serious injury or death.
- Electrical Wiring:
- Make sure there are no exposed wires or strands that could cause a dangerous short circuit.
- Use a Wire Nut (D) to securely connect the wires. Follow the correct wire polarity and never reverse hot and neutral wires to prevent serious injury or death.
- Fixture Assembly:
- Attach the Fixture Assembly (F) to the Mounting Plate (A) using the provided Flathead Screws (E).
- Install the recommended 5 Watt LED, G9 Lamp (G) into the Socket of the Fixture Assembly (F). Do not exceed the recommended wattage.
- Attach the Large Glass (H) and Small Glass components to the Fixture Assembly (F).
- Replacement Parts:
- If any parts need replacement, refer to the Replacement Part Name and use the corresponding Replacement Part Number from the Hardware Kit.
WARNING/CAUTION
- DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
- TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION ANDMAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
- CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER USE.
- UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANY DAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
- PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.
PARTS
FIXTURE INSTALLATION
- Attach the MOUNTING PLATE (A) unto the junction box using the MOUNTING SCREWS (B). This fixture is designed to be mounted on standard round or octagon junction box. The junction box must be securely mounted to the structure of the building.
- Attach the Ground wire (Green) to the ground inside the outlet box (Generally green or bare copper wire) or the GROUND SCREW (C) on the MOUNTING PLATE (A). NEVER CONNECT GROUND WIRE TO “HOT” WIRE! FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
- Connect the white fixture lead to the neufral (Generally white) wire in the outlet box. Fasten the wires together with an approved fastener (WIRE NUT) (D). Starting 1* below the fastener, tightly wrap the connection with electrical tape so that the connections seals the end of the fastener. MAKE SURE THERE ARE NO EXPOSED WIRE OF STRANDS THAT COULD CAUSE A DANGEROUS SHORT CIRCUIT!
- Connect the black fixture leads to the hot (Generally black) wire in the junction box. Fasten the joined wires same as previous step. NEVER REVERSE HOT AND NEUTRAL WIRES. FAILURE TO FOLLOW THIS COULD RESULT IN SERIOUS INJURY OR DEATH!
- Attach the FIXTURE ASSEMBLY (F) fo the MOUNTING PLATE (A) using FLATHEAD SCREWS (E).
- Push the BULB (G) into the SOCKET of the FIXTURE ASSEMBLY (F). THIS FIXTURE IS RATED FOR WATT LED, TYPE G9 LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
- Attach the LARGE GLASS (H) and SMALL GLASS onto the FIXTURE ASSEMBLY (F).
- Restore power to the outlet at the breaker or fuse box.
Read User Manual Online (PDF format)
Loading......