BOSCH HSG758D.1A Combi Steam Oven User Manual

: June 1, 2024
: Bosch

BOSCH HSG758D.1A Combi Steam Oven

BOSCH-HSG758D-1A-Combi-Steam-Oven-image

Product Information

Specifications

Product: Combi Steam Oven
Model: HSG758D.1A
Language: English [en]

The Combi Steam Oven HSG758D.1A is a versatile kitchen appliance that combines the functions of a steam oven and a convection oven.
It offers precise temperature control and humidity settings, allowing you to cook a wide variety of dishes with optimal results.

Product Usage Instructions

Safety Precautions

Keep children under the age of 8 away from the appliance and power cable.
Always place accessories in the cooking compartment the right way round to prevent risks of fire.
Exercise caution when handling hot parts of the appliance, such as heating elements and telescopic shelves.
Avoid pouring water into the cooking compartment when it is hot to prevent steam-related injuries.

Proper Use and Care

Use oven gloves when handling hot accessories or cookware inside the cooking compartment.
Avoid storing combustible objects in the cooking compartment to prevent fire hazards.
Open the appliance door carefully to avoid steam burns and potential steam-related accidents.
Do not heat spirits with high alcohol content when undiluted to prevent fire risks.

Cleaning and Maintenance

Do not use harsh or abrasive cleaners on the appliance door to prevent scratches that may lead to cracks.
Only carry out repairs by trained specialist staff using genuine spare parts to prevent electric shock hazards.
Keep electronic implants such as pacemakers at least 10 cm away from the control panel due to magnetism concerns.

FAQs

Q: How do I clean the appliance?
- A: Use a soft cloth with mild detergent to clean the exterior surfaces. For interior cleaning, follow the manufacturer’s instructions provided in the user manual.
Q: Can I use metal utensils inside the cooking compartment?
- A: It is recommended to use utensils that are approved for use in a steam oven to avoid damaging the appliance.

boMsgecywRnthBefeeo-rwhegslcecoidsohbmetmevneeinocree.wecfyiooaotnsnum:dr /

Combi steam oven

HSG758D.1A

[en]

User manual and installation instructions

enSafety
Further information and explanations are available online:

Safety

Observe the following safety instructions. 1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the
product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use This appliance is designed only to be built into kitchen units. Read the special installation instructions. Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. Only use this appliance: ¡ To prepare meals and drinks. ¡ in private households and in enclosed spaces in a domestic environment. ¡ up to an altitude of max. 2000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.

Keep children under the age of 8 years away from the appliance and power cable.
1.4Safe use Always place accessories in the cooking compartment the right way round. “Accessories”, Page 11
WARNING Risk of fire! Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the
cooking compartment. If smoke is emitted, the appliance must be
switched off or the plug must be pulled out and the door must be held closed in order to stifle any flames. Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the food residues and remnants from the cooking compartment, heating elements and accessories. Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire. Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. Always cut greaseproof paper to size and use a plate or baking tin to hold it down.
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Accessories and cookware get very hot. Always use oven gloves to remove ac-
cessories or cookware from the cooking compartment. When the cooking compartment is hot, any alcoholic vapours inside may catch fire. The appliance door may spring open. Hot steam and jets of flame may escape. Only use small quantities of drinks with a high alcohol content in food. Do not heat spirits ( 15% vol.) when undiluted (e.g. for marinating or pouring over food). Open the appliance door carefully.

Safetyen
The telescopic shelves become hot when the appliance is in use. Allow hot telescopic shelves to cool down
before touching them. Only touch hot telescopic shelves with
oven gloves. WARNING Risk of scalding!
The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature. Open the appliance door carefully. Keep children at a safe distance. If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compart-
ment when the cooking compartment is hot.
WARNING Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface. The appliance and its parts that can be touched may have sharp edges. Take care when handling and cleaning them. If possible, wear protective gloves. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves. Alcoholic vapours may catch fire in the hot cooking compartment, and the appliance door may spring open and may fall off. The door panels may shatter and fragment. “Preventing material damage”, Page 5 Only use small quantities of drinks with a high alcohol content in food. Do not heat spirits ( 15% vol.) when undiluted (e.g. for marinating or pouring over food). Open the appliance door carefully.

enSafety
WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when repair-
ing the appliance. If the power cord of this appliance is dam-
aged, it must be replaced by trained specialist staff. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord. An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to clean the appliance. If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box. Call customer services. Page 41
WARNING Danger: Magnetism!
Caution: Magnetism Caution for people with pacemakers Permanent magnets are used in the control panel. These may impair the functionality of electronic implants, e.g. pacemakers or insulin pumps. Persons with electronic implants must stand at least 10 cm away from the control panel.

WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. 1.5Steam Follow these instructions when using a steam function.
WARNING Risk of scalding! The water in the water tank may become very hot if you operate the appliance for long periods. Always empty the water tank after using the
steam function. Hot steam is generated in the cooking compartment. Do not reach into the cooking compartment
when using steam. Hot liquid may spill over the sides of the accessory when it is removed from the cooking compartment. Remove hot accessories with care and al-
ways wear oven gloves. WARNING Risk of fire!
Due to the hot surfaces, vapours from flammable liquids may catch fire in the cooking compartment (explosion). The appliance door may spring open. Hot steam and jets of flame may escape. Do not pour flammable liquids (e.g. alco-
holic drinks) into the water tank. Only fill the water tank with water or with
the descaling solution we have recommended.
1.6Meat probe
WARNING Risk of electric shock! Using the wrong meat probe could damage the insulation. Only use the meat probe for this specific
appliance.

Preventing material damageen

WARNING Risk of injury! The meat probe is sharp. Handle the meat probe with care.

1.7Cleaning function
WARNING Risk of burns! The outside of the appliance gets very hot when the cleaning function is in progress. Never touch the appliance door. Allow the appliance to cool down. Keep children at a safe distance.

Preventing material damage

Preventingmaterialdamage

2.1General
ATTENTION! Alcoholic vapours may catch fire in the hot cooking compartment and cause permanent damage to the appliance. The appliance door may spring open due to an explosion and it may fall off. The door panels may shatter and fragment. Due to the resulting negative pressure, the cooking compartment may become considerably deformed inwards. Do not heat spirits ( 15% vol.) when undiluted (e.g.
for marinating or pouring over food). If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. Objects on the cooking compartment floor at over 50 °C will cause heat to build up. The baking and roasting times will no longer be correct and the enamel will be damaged. Do not place any accessories, greaseproof paper or
foil of any kind on the cooking compartment floor. Only place cookware on the cooking compartment
floor if a temperature under 50 °C has been set. Using silicone moulds or any film, covers or accessories that contain silicone could damage the baking sensor. Damage may occur even if the baking sensor is not active. Do not use silicone moulds or any film, covers or
accessories that contain silicone. Never place objects made of silicone in the cooking
compartment. When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage. Never pour water into the cooking compartment
when it is still hot. Never place cookware containing water on the
cooking compartment floor. The prolonged presence of moisture in the cooking compartment leads to corrosion. Allow the cooking compartment to dry after use. To
do this, open the cooking compartment door completely or use the drying function. Do not keep moist food in the cooking compartment for a long time with the door closed. Do not store food in the cooking compartment. Take care not to trap anything in the appliance door.

Fruit juice dripping from the baking tray leaves stains that cannot be removed. When baking very juicy fruit flans, do not pack too
much on the baking tray. If possible, use the deeper universal pan. Using oven cleaner in a hot cooking compartment damages the enamel. Never use oven cleaner in the cooking compartment
when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. If the seal is very dirty, the appliance door will no longer close properly during operation. This may damage the front of adjacent kitchen units. Keep the seal clean at all times. Never operate the appliance if the seal is damaged or missing. Sitting or placing objects on the appliance door may damage it. Do not place, hang or support objects on the appliance door. Do not place cookware or accessories on the appliance door. With certain models, accessories may scratch the door pane when closing the appliance door. Always push accessories fully into the cooking compartment. If aluminium foil comes into contact with the door pane, it could cause permanent discolouration. Do not allow aluminium foil in the cooking compartment to come into contact with the door pane.
2.2Steam
Follow these instructions when using the steam function. ATTENTION! Using cookware with rust spots may cause corrosion in the cooking compartment. Even the smallest spots of rust can cause corrosion. Do not use cookware with rust spots. Dripping liquids make the cooking compartment floor dirty. When steaming with a perforated cooking container,
always place the baking tray, the universal pan or the unperforated cooking container underneath. This will catch any liquid that drips down. Hot water in the water tank may damage the steam system. Only fill the water tank with cold water.

enEnvironmental protection and saving energy

If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. A lot of steam is produced during operation with the types of steam heating. Condensate that collects in the drip trough underneath the cooking compartment may overflow and damage adjacent units. Do not open the appliance door, or open it as infre-
quently as possible, while the appliance is in operation.

If descaling solution comes into contact with the control panel or other delicate surfaces, it will damage them. Remove descaling solution immediately with water. Cleaning the water tank in the dishwasher will damage it. Do not clean the water tank in the dishwasher. Clean the water tank with a soft cloth and standard
washing-up liquid. If several steam operations are carried out one after the other without wiping out the cooking compartment floor and the condensate tray afterwards in each case, the water collected may overflow and may damage furniture panels or bases. Wipe down the cooking compartment floor and the
condensate tray after every steam operation.

Environmental protection and saving energy

Environmentalprotectionandsavingenergy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less power. Only preheat the appliance if the recipe or the recommended settings tell you to do so. “How it works”, Page 42 ¡ Not preheating the appliance can reduce the en-
ergy used by up to 20%. Use dark-coloured, black-coated or enamelled baking tins. ¡ These types of baking tin absorb the heat particu-
larly well. Open the appliance door as little as possible during operation. ¡ This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance to reheat. When baking multiple dishes, do so in succession or in parallel. ¡ The cooking compartment is heated after baking the first dish. This reduces the baking time for the second cake. If the cooking time is relatively long, you can switch the appliance off 10 minutes before the cooking time ends. ¡ There will be enough residual heat to finish cooking the dish. Remove any accessories that are not being used from the cooking compartment. ¡ Accessories that are not being used do not need to be heated. Allow frozen food to defrost before cooking. ¡ This saves the energy that would otherwise be required to defrost it.

Switch off the display in the basic settings. “Basic settings”, Page 25 ¡ Energy is saved when the display is switched off. Note: The appliance requires: ¡ A maximum of 2 W in networked standby mode ¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off

Familiarising yourself with your appliance

4 Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance

4.1Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. On certain models, specific details such as colour and shape may differ from those pictured.
1

Display with setting ring You can use the digital setting ring to set the

appliance via the display.

You will see the current setting values, options

or relevant information.

“Display”, Page 7

Buttons You can use the buttons to directly set various

functions.

“Buttons”, Page 7

4.2Buttons
You can use the buttons to directly select various functions.

Button

Function Switch the appliance on or off. “Basic operation”, Page 14 Open the “Operating modes” menu. “Operating modes”, Page 8 Start or pause operation. “Basic operation”, Page 14 Display for Home Connect. The field has no further function. When the symbol lights up, the appliance is connected. “Home Connect “, Page 26 Open the control panel to remove the water tank. “Filling the water tank”, Page 17

4.3Display
The display is divided into different areas.

Digital setting ring You can use the digital setting ring on the display to change the setting values. When you reach the minimum or maximum value available, this value remains on the display. If required, use the setting ring to turn the value back again.

Finely tuned setting values To fine-tune the setting values, e.g. to set a time to the precise minute, press and hold the corresponding area in the setting ring for around 1 – 2 seconds. The finely tined setting values are shown in dots.

Status indicator Status information is shown at the top of the display.

Symbol

Meaning Timer is activated. “Setting the timer”, Page 17 Childproof lock is activated. “Childproof lock”, Page 24 Wi-Fi signal strength for Home Connect. The more lines of the symbol are filled, the better the signal. If the symbol is struck through , there is no Wi-Fi signal. If there is an “x” at the symbol , there is no connection to the Home Connect server. “Home Connect “, Page 26 Remote start with Home Connect is activated. “Home Connect “, Page 26 Remote diagnostics with Home Connect for maintenance is activated. “Home Connect “, Page 26 Access to different functions.

Settings area The settings area is in the centre of the display. You can see current options and settings that have already been made in the settings area. You can see other setting options to the left and right of the settings area, outside of the setting ring. The menu and other setting options are arranged horizontally. Selection lists for functions are vertically arranged. Swipe over the display to scroll in the settings area. To select a function, press the function on the display. “Setting the operating mode”, Page 14

Possible symbols in the settings area

Symbol

Meaning Go back one setting.
Reset the setting value.

Note: A blue marking “new” or a blue dot on a function indicates that a new function, a new favourite or an update was downloaded to your appliance using the Home Connect app.

enOperating modes
4.4Cooking compartment
Various functions in the cooking compartment provide support when operating your appliance. Shelf supports The shelf supports in the cooking compartment enable you to place accessories at different heights. “Accessories”, Page 11 Your appliance has 5 shelf positions. The shelf positions are numbered from bottom to top. The shelf supports are equipped with pull-out rails on one or more levels, depending on the appliance type. You can remove the shelf supports, e.g. for cleaning. “Rails”, Page 36
Self-cleaning surfaces The self-cleaning surfaces in the cooking compartment are coated with a porous, matt ceramic layer and have a rough surface. When the appliance is in operation, the self-cleaning surfaces absorb splashes from roasting or grilling and break them down. The following surfaces are self- cleaning: ¡ Back wall ¡ Ceiling ¡ Side walls Use the cleaning function regularly to help retain the cleaning ability of the self-cleaning surfaces and prevent damage. “Cleaning function ‘EcoClean'”, Page 30 Lighting One or more oven lights illuminate the cooking compartment. When you open the appliance door, the light in the cooking compartment switches on. If the appliance door remains open for longer than around 18 minutes, the light switches off again.

Operating modes

Operatingmodes
This is where you can find an overview of your appliance’s operating modes and main functions. Press to open the menu.

For most operating modes, the lighting is switched on during operation. The lighting switches off again when the operation ends. Cooling fan The cooling fan switches on and off depending on the appliance’s temperature. The hot air escapes above the door. ATTENTION! Covering the ventilation slots will cause the appliance to overheat. Do not cover the ventilation slots. To ensure that the appliance cools down more quickly after operation, the cooling fan continues to run for a certain period afterwards. Appliance door If you open the appliance door during operation, the operation stops. If you close the appliance door, operation resumes automatically. Water tank You need the water tank for the types of steam heating. The water tank is behind the control panel. “Filling the water tank”, Page 17
12
3
1 Tank cover 2 Opening for filling and emptying 3 Handle for removing and inserting

Operating mode Types of heating

Use Select finely tuned types of heating for the optimal preparation of your food. “Types of heating”, Page 9 “Basic operation”, Page 14

Operating modesen

Operating mode Steam Favourites Dishes Cleaning
Basic settings

Use
Gently prepare food with types of steam heating. “Steam”, Page 17 Use your own saved settings. “Favourites”, Page 24 Use programmed, recommended settings for various types of food. “Dishes”, Page 22 Select the cleaning function for the cooking compartment. “Cleaning function ‘EcoClean'”, Page 30 “Cleaning aid”, Page 31 “Descaling”, Page 32 “Drying”, Page 32 Adjust the basic settings. “Basic settings”, Page 25

Home Connect With Home Connect, you can connect and remotely control the oven with a mobile device, and use the full functionality of the appliance. Depending on the appliance type, additional or more comprehensive functions are available for your appliance with the Home Connect app. You can find more information about this in the app. “Home Connect “, Page 26

5.1Types of heating
To ensure that you always find the right type of heating to cook your food, we explain the differences and applications below. The symbols for each type of heating help you to remember them.

When you select a type of heating, the appliance suggests a suitable temperature or setting. You can use these values or change them within the specified range. For grill setting 3, the appliance reduces the temperature to grill setting 1 after approx. 40 minutes.

Symbol Type of heating 4D hot air

Temperature range 30 – 250 °C

Top/bottom heating 30 – 250 °C

Hot air gentle

125 – 250 °C

Air Fry

30 – 250 °C

Top/bottom heating 150 – 250 °C gentle

What it’s used for and how it works
Bake or roast on one or more levels. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. Traditionally bake or roast on one level. This type of heating is especially good for cakes with moist toppings. The heat is emitted evenly from above and below. Cook selected dishes gently on one level without preheating. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. The food is cooked in phases using residual heat. Always keep the appliance door closed when cooking. The food is cooked in phases using residual heat. Always keep the appliance door closed when cooking. If you open the appliance door even briefly, the appliance will continue to heat without utilising any residual heat. This type of heating is used to determine the energy consumption in air recirculation mode and the energy efficiency class. Cook until crispy, on one level with little fat. Especially suitable for food that is usually fried in oil, e.g. chips. The fan circulates heat from the grill element around the food at high speed. The exhaust air is extracted more intensively from of the cooking compartment. Gently cook selected dishes. Heat is emitted from above and below. The food is cooked in phases using residual heat. Always keep the appliance door closed when cooking. The food is cooked in phases using residual heat. Always keep the appliance door closed when cooking. If you open the appliance door even briefly, the appliance will continue to heat without utilising any residual heat. This type of heating is used to measure the energy consumption in the conventional mode.

enOperating modes

Symbol Type of heating Circulated air grilling

Temperature range 30 – 250 °C

Full-surface grill Centre-area grill Pizza setting

Grill settings: 1 = low 2 = medium 3 = high Grill settings: 1 = low 2 = medium 3 = high 30 – 250 °C

Intensive heat Low-temperature cooking

30 – 250 °C 70 – 120 °C

Drying out food Bottom heating
Keeping warm Plate warming

30 – 130 °C 30 – 250 °C
50 – 100 °C 30 – 90 °C

What it’s used for and how it works
Roast poultry, whole fish or larger pieces of meat. The grill element and the fan switch on and off alternately. The fan circulates the hot air around the food. Grill flat items such as steak and sausages, or make toast. Gratinate food. The entire area below the grill element becomes hot.
Grill small quantities such as steak and sausages, or make toast. Gratinate small quantities of food. The central area below the grill element becomes hot.
Cook pizza or food that requires a lot of heat from below. The bottom heating element and the ring-shaped heating element in the back wall heat the cooking compartment. Prepare dishes with a crispy base. The heat is emitted from above and more intensively from below. Slowly and gently cook seared, tender pieces of meat in uncovered cookware. The heat is emitted evenly from above and below at a low temperature. Dry herbs, fruit or vegetables. Final baking or cooking food in a bain marie. The heat is emitted from below. Keep cooked food warm. Preheat cookware.

Types of steam heating The types of steam heating can be found in the

Symbol Type of heating
Defrost Reheating

Temperature range 30 – 60 °C
80 – 180 °C

Steam Plus

30 – 120 °C

Proving dough

30 – 50 °C

menu under “Steam”.
What it’s used for and how it works
Gently defrost frozen food. Gently reheat plated meals and baked items. The steam ensures that the food does not dry out. Gently steam vegetables, meat, fish and cereal. Juice fruit. Blanch food. In order to reduce the cooking time, more robust food can be steamed at above 100 °C. Leave the yeast dough to prove. The dough rises considerably more quickly than at room temperature. The surface of the dough does not dry out.

5.2Temperature
With most types of heating, you can set the current temperature in the cooking compartment to approx. 30 °C in the display during heating and read the set temperature one above the other. When you are preheating the appliance, the optimal time to place the food in the cooking compartment is as soon as the displayed temperature in the cooking compartment and the set temperature are the same.

Note: Due to thermal inertia, the temperature that is displayed may differ slightly from the actual temperature inside the cooking compartment. Residual heat indicator When the appliance is switched off, a red line around the control ring indicates the residual heat in the cooking compartment. The further the temperature drops, the darker the ring. The ring goes out completely at approx. 60 °C.

Accessories

6 Accessories Accessories
Use original accessories. These have been made especially for your appliance. Note: Accessories may become deformed if they get hot. Deformation has no effect on function. As the accessory cools down, it will regain its original shape. Accessories Wire rack
Universal pan
Air Fry & Grill Tray, enamelled, perforated Steam container, solid, size M
Steam container, perforated, size M Perforated steam container, size XL

The accessories supplied may differ depending on the appliance model.
Use ¡ Cake tins ¡ Ovenproof dishes ¡ Cookware ¡ Meat, e.g. roasting joints or steak ¡ Frozen meals ¡ Moist cakes ¡ Baked items ¡ Bread ¡ Large roasts ¡ Frozen meals ¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack or water when cooking with steam. ¡ Bake until crispy, for food that is usually fried in oil, e.g. chips. ¡ Grilling food. Do not use the enamelled Air Fry & Grill tray as a steaming tray. Cooking: ¡ Rice ¡ Pulses ¡ Cereals Do not place the steam container on the wire rack. ¡ Steaming vegetables. ¡ Juicing berries. ¡ Defrosting. Do not place the steam container on the wire rack. Steaming large quantities of food.

Meat thermometer

High-precision roasting or cooking. “Meat probe”, Page 20

6.1Information on accessories
Some accessories are only suitable for certain types of heating.
Steam container The steam containers are suitable for steam-only types of heating up to 120 °C. The steam containers are not suitable for higher temperatures or other types of heating. The containers become permanently discoloured and deformed.

6.2Locking function
The locking function prevents the accessories from tilting when they are pulled out. You can pull out the accessories approximately halfway without them tipping. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly.

enAccessories

6.3Sliding accessories into the cooking compartment
Always slide the accessory into the cooking compartment the right way round. This is the only way to ensure that accessories can be pulled out approximately halfway without tipping. 1. Turn the accessories so that the notch is at the
rear and is facing downwards. 2. Insert the accessory between the two guide rods for
a shelf position.

Wire rack

Insert the wire rack with the open side facing the appliance door and the curved lip facing downwards.

Baking tray Slide the tray in with the sloping E.g. univer- edge towards the appliance door. sal pan or baking tray Steam container, perforated, size XL 3. To place the accessory at shelf positions with pullout rails, pull out the pull-out rails.

Wire rack or baking tray

Place the accessory so that it is inserted on the rear stop of the pull-out system.

PUSH

Note: The pull-out rails lock in place when they are fully pulled out. Gently push the pull-out rails back into the cooking compartment. 4. Push the accessory all the way in, making sure that it does not touch the appliance door. Note: Take any accessories that you will not be using out of the cooking compartment while the appliance is in operation. Combining accessories You can combine the wire rack with the universal pan to catch any liquid that drips down. 1. Place the wire rack on the universal pan so that both spacers are on the rear edge of the universal pan. 2. Insert the universal pan between the two guide rods for a shelf position. In so doing, the wire rack is on top of the upper guide rod. Wire rack on universal pan
6.4Other accessories
You can purchase other accessories from our customer service, specialist retailers or online. You will find a comprehensive range of products for your appliance in our brochures and online: www.bosch-home.com Accessories are appliance-specific. When purchasing accessories, always quote the exact product number (E no.) of your appliance. You can find out which accessories are available for your appliance in our online shop or from our customer service.

Before using for the first time

7 Before using for the first time Beforeusingforthefirsttime
Implement the settings for the initial configuration. Calibrate the appliance. Clean the appliance and accessories.

7.1Determining the water hardness before switching on the appliance for the first time

Before using the appliance for the first time, ask your water supplier about the hardness of your tap water. To ensure that the appliance can reliably remind you to descale it when required, you must set your water hardness range correctly. ATTENTION! If the wrong water hardness has been set, the appliance cannot remind you to descale it at the right time. Set the water hardness correctly. Using unsuitable liquids may damage the appliance. Do not use distilled water or other liquids. Only use cold, fresh tap water, softened water or
non-carbonated mineral water.

Malfunctions may occur when using filtered or demineralised water. The appliance may request that you top up the water tank even though it may be full, or operation with steam is cancelled after approx. two minutes. If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio of one to one. Notes ¡ If you are using mineral water, set the water hardness range to “very hard”. If you are using mineral water, you must only use non-carbonated mineral water. ¡ If your tap water is very hard, we recommend that you use softened water. If you are using only softened water, set the “softened” water hardness range.

Setting

Water hardness in mmol/l

German hardness °dH

0 (softened)1

–

1 (soft)

Up to 1.5

Up to 8.4

2 (medium)

1.5-2.5

8.4-14

3 (hard)

2.5-3.8

14-21.3

4 (very hard)2

Over 3.8

Over 21.3

1 Only set this if you will be using solely softened water. 2 Also set for mineral water. Only use non-carbonated mineral water.

French hardness °fH
Up to 15 15-25 25-38 Over 38

7.2Performing initial start-up
After connecting the appliance to the power supply, you must configure the settings for its initial start-up. It may take a few minutes for the settings to appear on the display. 1. Press to switch the appliance on. a The first setting appears. 2. To change the setting as required, press a value in
the list or change the value using the setting ring. Possible settings: Language Home Connect “Home Connect “, Page 26 Time
“Setting the time”, Page 26 Water hardness
“Determining the water hardness before switching on the appliance for the first time”, Page 13 3. Press “Continue” and switch to the next setting. 4. Work through the settings and make changes as required. a After the last setting, a message appears on the display confirming that the initial start-up is complete. 5. To check the appliance before heating for the first time, open and close the appliance door once.

7.3Calibrating and cleaning the appliance before using it for the first time
To ensure that the appliance is automatically calibrated, allow the appliance to run empty in steam operation. Before using the appliance to cook food for the first time, you must clean the cooking compartment and accessories. Note: The boiling point of water depends on the air pressure. During the calibration process, the appliance makes adjustments to adapt to the pressure conditions in the location where it is installed. Do not open the appliance door while calibration is in progress, as this will cancel the calibration process.
Requirement: The cooking compartment is cold or at room temperature. 1. Remove the product information and the accessor-
ies from the cooking compartment. Remove any leftover packaging, such as polystyrene pellets, and any adhesive tape that is in or on the appliance. 2. Wipe the smooth surfaces in the cooking compartment with a soft, damp cloth. 3. Press to switch the appliance on. 4. Fill the water tank. “Filling the water tank”, Page 17 5. Apply the following settings:

Type of heating

Steaming

enBasic operation

Temperature Cooking time

100 °C 30 minutes

“Basic operation”, Page 14 6. Start the operation.
Ventilate the kitchen while the appliance is heating.
a Calibration starts. This creates a lot of steam. a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the operation has finished. 7. Allow the appliance to cool down and then dry the cooking compartment floor thoroughly. 8. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compart-
ment floor before operation.
Apply the following settings:

Type of heating Temperature Cooking time

4D hot air Maximum 30 minutes

“Basic operation”, Page 14

Basic operation

Basicoperation
8.1Switching on the appliance
Press to switch the appliance on. a The display shows the menu.
8.2Switching off the appliance
Switch your appliance off when you are not using it. The appliance will switch itself off automatically if it is not used for a certain period of time. Press to switch the appliance off. a The appliance switches off. Any functions currently
in progress are cancelled. a The time or residual heat indicator appears on the
display.
8.3Starting the operation
You must start each operation. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. Press to start the operation. a The settings appear on the display.

9. Start the operation. Ventilate the kitchen while the appliance is heating.
a When the time has elapsed, a signal sounds. A message appears on the display confirming that the operation has finished.
10. Press to switch the appliance off. 11. Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a detergent solution and a dish cloth. 12. Clean the accessories thoroughly using a detergent solution and a dish cloth or soft brush. 13. Dry the appliance. “After using steam operation”, Page 19 Note: Following a power cut, the calibrated settings are retained. To adjust the appliance to a new installation location after moving house, reset the basic settings to the factory settings. Restart the calibration process.
8.4Interrupting the operation
You can interrupt the operation and then continue again. 1. To interrupt the operation, press . 2. Press again to resume the operation.
8.5Setting the operating mode
After you have switched on the appliance, the menu appears on the display. 1. To scroll through the various selection options,
swipe to the left or right on the display. Swipe right or left to scroll through the menu and
other setting options. Swipe down or up to scroll through selection
lists. 2. To select a function, press the function on the dis-
play. a Depending on the function, possible setting values
or other tiles are available for selection. 3. To go back to a setting if necessary, press . 4. To change the setting values, use the digital setting
ring: Swipe over the setting ring clockwise or anti-
clockwise, as required. Or press a specific position on the setting ring. 5. Press to start the operation. 6. If the operation is ended: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off.

Note: You can save your settings as “Favourites” and use these again. “Favourites”, Page 24
8.6Setting the type of heating and the temperature
1. Press “Types of heating” in the menu. 2. Press the type of heating that you want to use. 3. Use the setting ring to set the temperature or level.
If required, you can implement additional settings: “Rapid heating”, Page 15 “Time-setting options”, Page 16 “Steam”, Page 17 “Meat probe”, Page 20 4. Press to start the operation. a The appliance starts heating. a The setting values and how long the appliance has already been in operation are shown on the display. 5. If the operation is ended: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Note: The most suitable type of heating for your food can be found in the description of the type of heating. “Types of heating”, Page 9 Changing the type of heating When you change the type of heating, the other settings are also reset. 1. Press . 2. Press . 3. Press the type of heating that you want to use. 4. Reset the operation and use to start. Changing the temperature Once the operation has started, you can change the temperature at any time. 1. Press the temperature. 2. Change the temperature with the setting ring. a The change is applied.
8.7Displaying information
In most cases, you can call up information about the function that you have just started. The appliance automatically displays certain information, e.g. to ask you to do/confirm something or to issue a warning. 1. Press “Info”. a Information is displayed for a few seconds. 2. To scroll through lots of content in the message,
swipe over the display.
9 Rapid heating Rapidheating
To save time, rapid heating can shorten the preheating time for set temperatures over 100 °C. Rapid heating is possible for the following types of heating: ¡ 4D hot air ¡ Top/bottom heating ¡ Intensive heat

Rapid heatingen
3. If necessary, use to exit the message.
8.8Keeping warm over an extended period
You can use your appliance to keep meals warm for up to 24 hours without changing the behaviour of the appliance. Use the time functions and change the basic settings. Note: If you open the appliance door during operation, the appliance stops heating. When you close the appliance door, the appliance continues to heat again. To ensure that the behaviour of the appliance is not changed during operation, only open the appliance door once the set time has elapsed. 1. Change the basic settings.
“Basic settings”, Page 25 Change the “Lighting” basic setting to “Always
off”. Change the “Standby screen” basic setting to
“On”. Change the “Signal tone” basic setting to “Very
short duration”. a This will ensure that the light in the cooking com-
partment is always off while the appliance is in operation and when you open the appliance door. The clock display does not change. The duration of the signal tone is reduced at the end of the operation. 2. Set the required operating mode. “Setting the operating mode”, Page 14 “Setting the type of heating and the temperature”, Page 15 3. Set the required cooking time depending on the operating mode. “Setting the cooking time”, Page 16 “Time- setting options”, Page 16 4. Use “End time” to set the time at which the operation should end. “Setting the end time”, Page 16 “Time-setting options”, Page 16 5. Place the food in the cooking compartment before the appliance starts to heat. 6. Press to start the operation. a The display shows the time remaining until the operation starts. The appliance is in standby mode. a Once the start time has been reached, the appliance starts heating and the cooking time starts counting down. 7. When the operation has ended, remove the food from the cooking compartment. The appliance automatically switches off completely after approximately 15 to 20 minutes. Note: If required, change the different basic settings again.
9.1Setting rapid heating
To ensure an even cooking result, do not place the food in the cooking compartment until rapid heating has come to an end. Note: Do not set a cooking time until rapid heating has come to an end.

enTime-setting options 1. Set a suitable type of heating and a temperature of
at least 100 °C. Rapid heating automatically switches on at temperatures of 200 °C and above. 2. Press “Rapid heating”. a The symbol lights up red. 3. Press to start the operation.

Time-setting options

Time-settingoptions

For an operation, you can set the cooking time and the time at which the operation should be finished. The timer runs independently of the operation.

Time-setting option Cooking time End time
Timer

Use
If you set a cooking time, the appliance stops heating automatically once this time has elapsed. Along with the cooking time, you can set the time at which you want the operation to end. The appliance starts up automatically so that the operation finishes at the required time. You can set the timer to run independently of the appliance during operation. It does not affect the appliance.

10.1Setting the cooking time
You can set the cooking time for the operation up to 24 hours. Requirement: An operating mode and temperature or level have been set. 1. Press “Cooking time”. 2. To set the cooking time, press the relevant time
value, e.g. hour display “h” or minute display “m”. a The selected value is marked in blue. 3. Use the setting ring to set the cooking time.
If required, use to reset the setting value. 4. Press to start the operation. a The appliance starts to heat and the time counts
down. a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the operation has finished. 5. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off.
Changing the cooking time You can change the cooking time at any time. 1. Press the cooking time . 2. Use the setting ring to change the cooking time. a The change is applied.
Cancelling the cooking time You can cancel the cooking time at any time.

a Rapid heating starts. a Once rapid heating has ended, a signal sounds.
The symbol changes back to white. 4. Place the food in the cooking compartment. Cancelling rapid heating Press “Rapid heating”. a The symbol changes back to white.
1. Press the cooking time . 2. Reset the cooking time using .
Note: For operating modes that always require a cooking time, the appliance resets the cooking time to the preset value. a The change is applied.
10.2Setting the end time
You can delay the time at which the cooking time for the operation is due to end by up to 24 hours. Notes ¡ To achieve good cooking results, do not delay the
time once the operation has already started. ¡ Food will spoil if you leave it in the cooking com-
partment for too long. Requirements ¡ An operating mode and temperature or level have
been set. ¡ A cooking time is set. 1. Press “End time”. 2. To set the time, press the hour display or the minute
display. a The selected value is marked in blue. 3. Use the setting ring to delay the time.
If required, use to reset the setting value. 4. Press to start the operation. a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode. a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts counting down. a When the time has elapsed, a signal sounds. A notification appears on the display confirming that the operation has finished. 5. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Changing the end time To achieve good cooking results, only change the set time before the operation starts and before the cooking time starts counting down. 1. Press the end time . 2. Use the setting ring to change the end time. a The change is applied. Cancelling the end time You can delete the set end time at any time. 1. Press the end time .

2. Use to reset the end time. Note: For operating modes that always require a cooking time, the appliance resets the time at which the cooking time ends to the next possible time.
a The change is applied.
10.3Setting the timer
The timer runs independently during the operation. You can set the timer for up to 24 hours. The timer has its own signal so that you can tell whether it is the timer or a cooking time that has elapsed. 1. Press in the status display. 2. Press . 3. To set the timer, press the relevant time value on
the display, e.g. minute display “m” or second display “s”. a The selected value is marked in blue. 4. Set the timer using the setting ring. If required, use to reset the setting value. 5. To start the timer, press “Start” on the display. a The timer counts down.
11 Steam Steam
Food can be cooked particularly gently using steam. You can use the special types of steam heating, or use steam assistance with certain types of heating.
WARNING Risk of scalding! Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature. Open the appliance door carefully. Keep children at a safe distance.
11.1Before using the steam function
Before using the steam function each time, make sure that your appliance is supplied with sufficient water. Filling the water tank
WARNING Risk of fire! Due to the hot surfaces, vapours from flammable liquids may catch fire in the cooking compartment (explosion). The appliance door may spring open. Hot steam and jets of flame may escape. Do not pour flammable liquids (e.g. alcoholic drinks)
into the water tank. Only fill the water tank with water or with the descal-
ing solution we have recommended. WARNING Risk of burns!
The water tank may heat up while the appliance is in operation. Wait until the water tank has cooled down from the
previous operation. Remove the water tank from the tank recess. Requirement: The water hardness is set correctly. 1. Press . a The control panel pops out automatically. 2. Pull the control panel towards you with both hands
and then push it upwards until it clicks into place .

Steamen a The timer remains visible on the display if the appli-
ance is switched off. a When the appliance is switched on, the display
shows the settings for the current operation. The timer is displayed in the status display. a Once the timer has elapsed, a signal sounds. A notification appears on the display confirming that the timer has finished. Changing the timer You can change the timer at any time. 1. If the timer is running in the background, use to select the timer beforehand. 2. Press . 3. Change the timer using the setting ring. 4. Press to confirm. Cancelling the timer You can cancel the timer at any time. 1. If the timer is running in the background, use to select the timer beforehand. 2. Press . 3. Reset the timer using .Reset the timer using . 3. Remove the water tank from the tank recess .
4. Press down on the water tank lid along the seal to prevent water from leaking out of the water tank.
5. Remove the cover on the water tank. 6. Fill the water tank with water up to the “max”
mark.
7. Put the cover back into the opening on the water tank.
17

enSteam
8. Insert the full water tank . When doing so, make sure that the water tank clicks into place behind the retainers .
9. Slowly slide the control panel downwards and then push it away from you until it is closed completely.
11.2Setting options with steam
There are various ways in which you can prepare your food with steam. Types of steam heating A variety of types of steam heating are available for which hot steam is used to gently prepare food. ATTENTION! A lot of steam is produced during operation with the types of steam heating. Condensate that collects in the drip trough underneath the cooking compartment may overflow and damage adjacent units. Do not open the appliance door, or open it as infre-
quently as possible, while the appliance is in operation. Steaming During steaming , the food is enveloped by hot steam, which helps to retain the nutrients. This cooking method also helps to retain the shape, colour and typical flavour of the food. When temperatures between 105 °C and 120 °C are set, the cooking time is reduced. This means that even more nutrients and vitamins are retained when steaming. Reheating The reheating function can be used to warm up food that has already been cooked, or bread and pastries from the day before, without affecting their quality. Proving dough Dough proves considerably more quickly using the dough proving steam heating type than at room temperature and does not dry out. Defrost Use the defrost function to defrost deep-frozen and frozen products gently without affecting the quality. Added steam When you cook with added steam, the appliance introduces steam into the cooking compartment at various intervals. This gives your food a crispy crust and a shiny surface. Meat stays juicy and tender, and only undergoes a minimum reduction in volume.

You can combine added steam with the following functions: ¡ Types of heating Page 15
4D hot air Top/bottom heating Circulated air grilling Keeping warm ¡ “Dishes”, Page 22 ¡ “Meat probe”, Page 20
Steam jet You can use the steam jet function to specifically add intensive steam at various intervals. This makes bread and bread rolls in particular wonderfully crispy and gives them a golden colour. The appliance adds clouds of steam to the cooking compartment for approx. 3 to 5 minutes. Depending on the operation, you can activate the steam jet several times. You can add the steam jet for the following functions: ¡ Types of heating Page 15
4D hot air Top/bottom heating Circulated air grilling ¡ “Meat probe”, Page 20 Note: Only use the steam jet when cooking compartment temperatures are above 120 °C.
11.3Setting the type of steam heating
Note: Observe the instructions for the types of steam heating: ¡ “Types of steam heating”, Page 18 Requirement: The water tank has been filled. If the water tank runs dry during operation, a message appears on the display. Operation is stopped. “Filling the water tank”, Page 17 1. Press “Steam” in the menu. 2. Press the required type of steam heating. 3. Use the setting ring to set the temperature. 4. Press “Cooking time”.
A cooking time must always be set for types of steam heating. 5. To change the preset cooking time, press the relevant time value, e.g. hour display “h” or minute display “m”. a The selected value is marked in blue. 6. Use the setting ring to set the cooking time. If required, use to reset the setting value. 7. Press to start the operation. a The appliance starts to heat and the time counts down. a When the time has elapsed, a signal sounds. A message appears on the display confirming that the operation has finished. 8. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. 9. Empty the water tank and dry the cooking compart-
ment. “After using steam operation”, Page 19

Changing the type of heating When you change the type of heating, the other settings are also reset. 1. Press . 2. Press . 3. Press the type of heating that you want to use. 4. Reset the operation and use to start.
Changing the temperature Once the operation has started, you can change the temperature at any time. 1. Press the temperature. 2. Change the temperature with the setting ring. a The change is applied.
Changing the cooking time You can change the cooking time at any time. 1. Press the cooking time . 2. Use the setting ring to change the cooking time. a The change is applied.

11.4Setting added steam

Requirements ¡ Observe the information about the respective operat-
ing mode. “Setting options with steam”, Page 18 ¡ The water tank has been filled. If the water tank runs dry during operation, a message appears on the display. The appliance continues to operate but without injecting steam into the cooking compartment. “Filling the water tank”, Page 17 1. Press the operating mode that you require in the menu. 2. Select the settings for the operating mode, e.g. type of heating and temperature. 3. Press “Added steam”. 4. Use the setting ring to set the steam level.

Steam level

Added steam

Low

Medium

High

5. Press to start the operation. a The appliance starts heating. a The setting values and how long the appliance has
already been in operation are shown on the display. 6. When the food is ready, use to switch the appli-
ance off. 7. Empty the water tank and dry the cooking compart-
ment. “After using steam operation”, Page 19

Changing added steam You can change or deactivate the added steam function at any time. 1. Press added steam . 2. Change or deactivate added steam using the setting
ring. a The change is applied.

Steamen
11.5Setting the steam jet function
Requirements ¡ Observe the information about the respective operat-
ing mode. “Setting options with steam”, Page 18 ¡ The water tank has been filled. If the water tank runs dry during operation, a message appears on the display. Operation is stopped. “Filling the water tank”, Page 17 1. Press the operating mode that you require in the menu. 2. Select the settings for the operating mode, e.g. type of heating and temperature. 3. Press to start the operation. 4. Press “Steam jet” at the desired time. Do not use the steam jet until the appliance has completely heated up. 5. Press “On” in the setting ring. a The appliance starts to heat the water. 6. When the water is heated up, press “Steam jet” again. Note: If rapid heating is activated, the steam jet can only be triggered once rapid heating is complete. a The steam jet is triggered and the appliance adds clouds of steam to the cooking compartment for approx. 3 to 5 minutes. a When the steam jet has finished, the operation continues to run as normal. Depending on the operation, the steam jet can be triggered again if necessary. 7. When the food is ready, use to switch the appliance off. 8. Empty the water tank and dry the cooking compartment. “After using steam operation”, Page 19 Cancelling the steam jet You can cancel the steam jet at any time. 1. Press “Steam jet”. 2. Press “Off” in the setting ring. a The operation continues without the steam jet.
11.6After using steam operation
Dry the appliance after each steam operation. Note: Traces of limescale may remain in the cooking compartment after operation with steam. The functionality of the appliance is not affected by this. You can remove traces of limescale using hot water or a cloth soaked in vinegar. Observe the information on cleaning. “Cleaning and servicing”, Page 28 Emptying the water tank
WARNING Risk of burns! The water tank may heat up while the appliance is in operation. Wait until the water tank has cooled down from the
previous operation. Remove the water tank from the tank recess.

enMeat probe
ATTENTION! Drying the water tank in the hot cooking compartment leads to damage to the water tank. Do not dry the water tank in the hot cooking com-
partment. Cleaning the water tank in the dishwasher will damage it. Do not clean the water tank in the dishwasher. Clean the water tank with a soft cloth and standard
washing-up liquid. 1. Use to open the control panel. 2. Remove the water tank. 3. Carefully remove the lid of the water tank. 4. Empty the water tank, clean it with detergent and
then rinse it thoroughly with clean water. 5. Dry all parts with a soft cloth. 6. Rub the seal on the lid until dry. 7. Leave the water tank to dry with the lid open. 8. Place the lid on the water tank and push down on it. 9. Insert the water tank and close the control panel. Drying the condensation tray
WARNING Risk of burns! The appliance becomes hot during operation. Allow the appliance to cool down before cleaning. Requirement: The cooking compartment has cooled down. 1. Open the appliance door.

Meat probe

Meatprobe
Cook with precision by inserting the meat probe into the food and setting a core temperature on the appliance. The meat probe measures the core temperature inside the food. Once the set core temperature has been reached in the food, the appliance automatically stops heating.
12.1Suitable types of heating with the meat probe
Only certain types of heating are suitable for use with the meat probe. You can use the meat probe with the following types of heating: ¡ 4D hot air ¡ Top/bottom heating ¡ Hot air gentle ¡ Top/bottom heating gentle ¡ Circulated air grilling ¡ Pizza setting ¡ Intensive heat ¡ Low-temperature cooking ¡ Bottom heat ¡ Keeping warm ¡ Steaming ¡ Reheating
12.2Inserting the meat probe
Use the meat probe supplied or order a suitable meat probe from our customer service.

2. Note: The condensation tray compartment.

is underneath the cooking

Soak up the water in the condensation tray with a tea towel and wipe it carefully. Note: You can remove the condensation tray in order to clean it. “Removing the condensate tray”, Page 33
Drying the cooking compartment Dry the cooking compartment after each steam operation. Dry the cooking compartment by hand or use the
drying function. “Drying”, Page 32

WARNING Risk of electric shock! Using the wrong meat probe could damage the insulation. Only use the meat probe for this specific appliance. ATTENTION! Otherwise the meat probe may be damaged. Do not trap the cable of the meat probe. To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centimetres between the grill element and the meat probe. The meat may expand during the cooking process.

WARNING Risk of injury! The meat probe is sharp. Handle the meat probe with care. Note: If the pull-out rails are attached at level 3, you cannot insert the roasting sensor in the cooking compartment. Unhook the pull-out rails or hook them in at a different level. “Rails”, Page 36
1. Insert the meat probe into the food. The meat probe has three measuring points. Ensure that at least the middle measuring point is inserted in the food.

Thin pieces of meat

Insert the meat probe into the thickest part of the meat from the side.

Thick pieces of meat

Insert the meat probe diagonally into the meat from above, pushing it in as far as possible.

Poultry

Note: If you want to turn the food, insert the meat probe into the side of the food so that it does not need to be removed when turning. Insert the meat probe into the thickest part of the breast, pushing it in as far as possible. The meat probe can be inserted horizontally or vertically depending on the size and shape of the poultry.

Turn the poultry and place it on the wire rack breast-side down.

Fish

When cooking whole fish, insert the

meat probe behind the fish’s head in the

direction of the spine, pushing it in as

far as possible.

Place the fish on the wire rack in the swimming position without turning it, e.g. using half a potato as a support. 2. Place the food with the meat probe into the cooking compartment. 3. Plug the meat probe into the socket on the left-hand side of the cooking compartment. Note: Do not remove the meat probe when turning the food. Once you have turned the food, check that the meat probe is correctly positioned in the food.
12.3Setting the meat probe
You can set a core temperature of between 30 °C and 99 °C.

Meat probeen

Requirements ¡ The food with the meat probe is in the cooking com-
partment. ¡ The meat probe is inserted in the cooking compart-
ment.

1. Press “Types of heating” in the menu. 2. Press the type of heating that you want to use. 3. Use the setting ring to set the cooking compartment
temperature. Set the cooking compartment temperature at least 10 °C higher than the core temperature. Do not set the cooking compartment temperature to higher than 250 °C. 4. Press “Meat probe”. 5. Use the setting ring to set the core temperature. If required, use to reset the setting value. 6. Press to start the operation. a The appliance starts heating.

a The setting values and how long the appliance has

already been in operation are shown on the display.

If the appliance is connected to Home Connect, the

forecast remaining time is displayed.

a Once the food reaches the core temperature, a sig-

nal sounds. A message appears on the display con-

firming that the operation has finished. The appli-

ance stops heating. With the low-temperature cook-

ing type of heating, the appliance continues to heat.

WARNING Risk of burns!

The cooking compartment, accessories and meat

probe become very hot.

Always use oven gloves to remove hot accessories and the meat probe from the cooking com-

partment.

When the core temperature is reached: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Pull the meat probe out of the socket in the
cooking compartment. Pull the meat probe out of the food and remove
it from the cooking compartment.

Tips ¡ You can also combine the meat probe with a
different operating mode, e.g.: “Steam”, Page 17 “Dishes”, Page 22 ¡ You can use the meat probe even if no core temperature is set. You can read off the core temperature of the food on the display and manually end the operation, if required.

Changing the temperature You can change the cooking compartment temperature and the core temperature at any time after starting the operation. 1. Press the cooking compartment temperature or
core temperature. 2. Change the temperature with the setting ring. a The change is applied.

Changing the type of heating When you change the type of heating, the other settings are also reset. 1. Press .

enDishes

2. Press . 3. Press the type of heating that you want to use. 4. Reset the operation and use to start.

12.4Remaining time forecast for the operation
If your appliance is connected to Home Connect, the appliance can forecast the expected remaining time for the cooking process. The initial remaining time appears on the display after approx. 1 minute. The remaining time is continually recalculated and updated. Note: The remaining time forecast is not available for all types of heating.

12.5Core temperatures of different foods
This is where you can find the suggested core temperatures for different foods. These suggestions depend on the quality and the size/ shape of the food. Do not use frozen food.

Poultry
Chicken Chicken breast Duck Duck breast, medium rare Turkey Turkey breast Goose

Core temperature in °C 80 – 85 75 – 80 80 – 85 55 – 60 80 – 85 80 – 85 80 – 90

Dishes

Dishes
The “Dishes” operating mode helps you to use your appliance to prepare different meals by selecting the optimum settings automatically.
13.1Cookware for dishes
The cooking result depends on the composition of the meat and the size of cookware. You should therefore use heat-resistant cookware that is suitable for temperatures up to 300 °C. Glass or glass ceramic cookware is best. The joint should cover approx. 2/3 of the cookware base. Cookware made from the following material is not suitable: ¡ Bright, shiny aluminium ¡ Unglazed clay ¡ Plastic or plastic handles
13.2Setting options for the dishes
To cook the dishes perfectly, the appliance uses different settings depending on the dish.

Pork
Shoulder of pork Fillet of pork, medium rare Pork loin, well done

Core temperature in °C 85 – 90 62 – 70 72 – 80

Beef
Tenderloin or sirloin, rare Tenderloin or sirloin, medium rare Tenderloin or sirloin, well done

Core temperature in °C 45 – 52 55 – 62 65 – 75

Veal
Joint of veal or hock, lean Joint of veal, shoulder Veal knuckle

Core temperature in °C 75 – 80 75 – 80 85 – 90

Lamb
Leg of lamb, medium rare Leg of lamb, well done Saddle of lamb, medium rare

Core temperature in °C 60 – 65 70 – 80 55 – 60

Fish
Fish, whole Fish fillet

Core temperature in °C 65 – 70 60 – 65

Other
Meat loaf, all kinds of meat Heating food, reheating

Core temperature in °C 80 – 90 65 – 75

The display shows you the settings that are used. You can adjust certain settings. Follow the instructions on the display. Note: The cooking result depends on the quality and composition of the food. Use fresh and, ideally, chilled food. Use frozen food straight from the freezer.
Tips and information about the settings If you set a dish, the display shows relevant information for this dish, e.g.: ¡ Suitable shelf position ¡ Suitable accessory or cookware ¡ Added liquid ¡ Time for turning or stirring
When this time is reached, a signal sounds. To call up the information, press “Info”. Some messages are displayed automatically.
Programmes The optimum type of heating, temperature and cooking time are preset for programmes.

To achieve an optimal cooking result, you must also set the weight, thickness or the cooking level. You can set the weight only in the intended range. Unless otherwise indicated, set the total weight for your dish.
Recommended settings For the recommended settings, the optimum type of heating is preset as a fixed value. You can adjust the preset temperature and the cooking time.
Baking sensor Some dishes are suitable for cooking with the baking sensor . You do not have to implement any further settings. The baking sensor monitors the baking process in the cooking compartment. The appliance regulates the settings automatically and ends the operation once the dish is ready. Notes ¡ Do not use the baking sensor if the dish is already
pre-baked. The baking result would no longer be satisfactory. ¡ Do not open the appliance door approx. 5 minutes after starting the operation with the baking sensor. The baking sensor mode stops. If you have to open the appliance door, restart the operation afterwards without the baking sensor or cancel the operation and set it manually. Monitor the cooking process until the food is ready. ¡ To achieve an optimal baking result, use dark-coloured metal baking tins.
ATTENTION! Using silicone moulds or any film, covers or accessories that contain silicone could damage the baking sensor. Damage may occur even if the baking sensor is not active. Do not use silicone moulds or any film, covers or
accessories that contain silicone. Never place objects made of silicone in the cooking
compartment.
Remaining time forecast for the operation If your appliance is connected to Home Connect, the appliance can forecast the expected remaining time for the cooking process. The initial remaining time appears on the display after approx. 1 minute. The remaining time is continually recalculated and updated. Note: The remaining time forecast is not available for all types of heating.
13.3Overview of the dishes
You can find out which individual dishes are available to you on the appliance when you call up the operating mode. The selection of dishes depends on the features of your appliance. The dishes are sorted by category and food. Note: In the basic settings, you can regionally specialise the displayed dishes. “Basic settings”, Page 25

Dishesen

Category Food

Baking sensor

Cakes Small baked items Savoury cakes, pizza, quiche Potato products, frozen

Note: This only contains dishes for cooking with the baking sensor.

Cakes

Cakes in tins Cakes on a baking tray Small baked items Biscuits

Bread,

Bread

bread rolls Bread rolls

Pizza, sa- Pizza voury cakes Savoury cakes, quiche

Bakes, soufflés

Bake, savoury, fresh, cooked ingredients Potato gratin, raw ingredients, 4 cm deep Fresh lasagne Lasagne, chilled Bake, sweet, fresh Fruit crumble Soufflés in individual moulds Yorkshire pudding

Poultry

Chicken Duck, goose Turkey

Meat

Pork Beef Veal Lamb Game Meat dishes

Fish.

Fish, whole Fish fillet Fish cutlet Fish dishes Seafood

Frozen products

Pizza Bakes Potato products Vegetables Poultry, fish Bread rolls

Side dishes, Potatoes vegetables Rice
Cereals Vegetables Pulses Pasta, dumplings Eggs

Desserts, compote

Yeast dumplings Crème caramel Rice pudding Fruit compote Yoghurt in glass jars

Preserving, extracting juice, sterilising

Preserving food Extracting juice Bottles, sterilise

enFavourites

Category Reheating, crisping up
Defrosting food

Food Baked items Side dishes Vegetables Menu Fruit, vegetables

13.4Setting a dish
1. Press “Dishes” in the menu. 2. Press the required category. 3. Press the required food. 4. Press the required dish.
Tip: For some dishes, you can select a preferred cooking method. “Setting options for the dishes”, Page 22 a The settings for the dish appear on the display. 5. Adjust the settings if required. You can adjust only certain settings depending on the dish. “Setting options for the dishes”, Page 22 6. For information about the accessory and shelf position, for example, press “Info”. 7. Press to start the operation.

14 Favourites Favourites
In the “Favourites”, you can save your settings and use these again. Note: Depending on the appliance type/software status, you must first download this function to your appliance. You can find more information in the Home Connect app.
14.1Saving favourites
You can save up to 30 different operating modes as your favourites. 1. If you set an operating mode, press next to the
title of the operating mode at the top of the display. 2. If required, change the title of the favourite using the
keyboard on the display. 3. Press “Apply”.
14.2Selecting favourites
If you have saved favourites, you can use these to set the operation. 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. If required, you can change the settings. 4. Press to start the operation. a The setting values are shown on the display.
15 Childproof lock Childprooflock
You can secure your appliance to prevent children from accidentally switching it on or changing the settings.
24

a The appliance starts to heat and the time counts down.
a No cooking time is displayed in baking sensor mode. The setting values and how long the appliance has already been in operation are shown on the display. If the appliance is connected to Home Connect, the forecast time remaining is displayed. “Remaining time forecast for the operation”, Page 23
a Once the dish is ready, a signal sounds. The appliance stops heating.
8. Once the cooking time has elapsed: If required, you can select other settings and restart the operation. When the food is ready, use to switch the appliance off.

13.5Automatic switch-off function

The automatic switch-off function

for the dishes

allows you to bake and fry without any stress.

When the operation has finished, the appliance auto-

matically stops heating.

To achieve an optimum cooking result, remove your

dish from the cooking compartment once the operation

has finished.

Note: Observe the instructions for the various operating modes: ¡ “Steam”, Page 17 ¡ “Meat probe”, Page 20
14.3Changing favourites
You can change, sort or delete your saved favourites at any time. 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. Next to the title of the favourite, press . 4. Change the settings or the title of the favourite. 5. Confirm the change.
Sorting favourites 1. Press “Favourites” in the menu. 2. Press and hold the required favourite and drag it to
a different position.
Deleting favourites 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. Next to the title of the favourite, press . 4. Confirm the deletion.

15.1Activating the childproof lock
The childproof lock can be activated regardless of whether the appliance is on or off.

1. To activate the childproof lock: If the appliance is switched off, press any area on the display. When the appliance is switched on, press on the status display.
2. Press . a A confirmation message appears on the display. a The control panel is locked. The appliance can only
be switched off using .

16 Basic settings Basicsettings
You can configure the basic settings for your appliance to meet your needs.

16.1Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of your appliance. You can find more information about the individual basic settings on the display using “Info”.

Basic settings Selection

Language

See selection on the appliance.

Home Connect Connect the oven to a mobile device and remotely control it. “Home Connect “, Page 26

Time

Time in 24-hour format.

Display

Selection

Brightness

¡ Levels 1, 2, 3, 4 and 51

Standby screen

¡ On for a limited time ¡ On (this setting increases energy
consumption) ¡ Off1

Clock

¡ Digital1 ¡ Analogue

Alignment

¡ Align the display horizontally and vertically.

1 Factory setting (may vary according to model)

Tone

Selection

Button tone

¡ On1 ¡ Off

Volume

¡ Levels 1, 2, 31, 4 and 5

Signal tone

¡ Very short duration (once) ¡ Short duration (ap-
prox. 5 seconds) ¡ Medium duration
(approx. 10 seconds)1 ¡ Long duration (ap-
prox. 30 seconds)

1 Factory setting (may vary according to model)

Basic settingsen

a When the appliance is switched on, When the appliance is switched off, up.

lights up. does not light

15.2Deactivating the childproof lock
You can deactivate the childproof lock at any time. 1. Press anywhere on the display. 2. To deactivate the childproof lock, follow the instruc-
tions on the display so that the graphic on the ring fills up completely. a A confirmation message appears on the display.

Appliance set- Selection tings

Fan run-on time

¡ Minimum ¡ Recommended1 ¡ Long ¡ Very long

Pull-out system ¡ Not retrofitted (if shelf supports and a single set of pull- out rails are fitted)1
¡ Retrofitted (if 2 or 3 sets of pullout rails are fitted)

Lighting

¡ When cooking and when the door is opened1
¡ Only when the door is opened ¡ Always off

Water hardness

¡ 4 (very hard)1 ¡ 3 (hard) ¡ 2 (medium) ¡ 1 (soft) ¡ 0 (softened)

1 Factory setting (may vary according to model)

Personalisa- Selection tion

Brand logo

¡ Display1 ¡ Do not display

Operation after ¡ Main menu1

switch-on

¡ Types of heating

¡ Steam

¡ Dishes

¡ Favourites

Elapsed cook- ¡ Do not display

ing time

¡ Display1

Regional dishes

¡ All1 ¡ European dishes ¡ British dishes

Dishes

¡ All1 ¡ No pork ¡ Kosher only

Childproof lock

¡ Button lock only1 ¡ Deactivated

Automatic

¡ off

rapid heating ¡ On1

1 Factory setting (may vary according to model)

enHome Connect

Factory settings Factory settings
Info Appliance information

Selection ¡ Restore
Display Display technical information about the appliance.

16.2Changing the basic settings
1. Press “Basic settings” in the menu. 2. Press the required basic settings area. 3. Press the required basic setting. 4. Press to select the required basic setting. a The change is applied directly for most basic set-
tings. 5. To change additional basic settings, use to go
back and select a different basic setting.

Home Connect

HomeConnect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Tip: Please also follow the instructions in the Home Connect app. Notes ¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed when operating the appliance via the Home Connect app. “Safety”, Page 2 ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. ¡ In networked standby mode, the appliance requires a maximum of 2 W.

6. To exit the basic settings, use to go back to the main menu or switch off the appliance using .
a The changes are saved. Note: Your changes to the basic settings will be retained even after a power failure.
16.3Setting the time
1. Press “Basic settings” in the menu. 2. Press “Time”. 3. To set the time, press the hour display or the minute
display. a The selected value is marked in blue. 4. Use the setting ring to set the time.
The minutes are counted in 5-minute increments. To set it to the precise minute, press and hold the corresponding area in the setting ring for around 1-2 seconds. The minutes are shown in dots. Use the setting ring to set the minutes.
5. To exit the basic settings, use to go back to the main menu or switch off the appliance using .
a The time is saved.
17.1Setting up the Home Connect app
1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect. The Home Connect app guides you through the entire login process.
17.2Setting up Home Connect
Requirements ¡ The appliance is connected to the power supply and
is switched on. ¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smartphone. ¡ The Home Connect app has been installed on your mobile device. ¡ The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location. ¡ The mobile device and the appliance are within range of your home network’s Wi-Fi signal.

Open the Home Connect app and scan the following QR code.

2. Follow the instructions in the Home Connect app.
17.3Home Connect settings
You can adjust the Home Connect settings and network settings in your appliance’s basic settings. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network.

Home Connecten

Basic setting Home Connect assistant

Possible settings Start the assistant Disconnect

Wi-Fi

Off

Remote control status Monitoring Manual remote start Permanent remote start

Explanation You can connect your appliance to the Home Connect app via the Home Connect assistant. Note: If you are using the Home Connect assistant for the first time, only the “Start assistant” setting is available.
You can use the Wi-Fi to switch off the network connection for your appliance. When you have connected successfully once, you can deactivate the Wi-Fi and not lose your detailed data. As soon as you activate Wi-Fi again, the appliance connects automatically. Note: In networked standby mode, the appliance requires a maximum of 2 W.
During monitoring, you can only view the operating status of the appliance in the app. If you convert from monitoring or permanent remote start to manual remote start, you must activate the remote start each time. You can open the appliance door within 15 minutes of having activated remote start. Remote start will not be deactivated by this. Once 15 minutes have elapsed, opening the appliance door will deactivate manual remote start. For permanent remote start, you can start and operate the appliance remotely at any time. If you often operate the appliance remotely, it is helpful to set the remote start to “Permanent”.

17.4Operating the appliance with the Home Connect app
You can use the Home Connect app to set and start the appliance remotely.
WARNING Risk of fire! Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the cooking
compartment. If smoke is emitted, the appliance must be switched
off or the plug must be pulled out and the door must be held closed in order to stifle any flames. Requirements ¡ The appliance is switched off. ¡ The appliance is connected to the home network and to the Home Connect app. ¡ In order to be able to set the appliance via the app, the manual or permanent remote start must be selected in the “Remote control status” basic setting. 1. To activate manual remote start, press . You only have to confirm on the oven if you are switching from monitoring or permanent remote start to manual remote start. With permanent remote start, you do not need to confirm on the oven. 2. Configure a setting in the Home Connect app and send it to the appliance. Notes ¡ When you start the oven using the controls on
the appliance itself, the remote start function is activated automatically. You can use the Home Connect app to adjust the settings or start a new programme. ¡ You can open the appliance door within 15 minutes of having activated remote start. Remote start will not be deactivated by this. Once 15 minutes have elapsed, opening the appliance door will deactivate manual remote start.

17.5Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful. Notes ¡ The software update consists of two steps.
The first step is the download. The second step is the installation on your appli-
ance. ¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. ¡ Installation takes a few minutes. You cannot use your appliance during installation. ¡ We recommend that you install security updates as soon as possible.
17.6Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.

enCleaning and servicing

17.7Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the installed Wi-Fi communication module). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection).

¡ The current software and hardware version of your appliance.
¡ Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Cleaning and servicing

Cleaningandservicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
18.1Cleaning products
In order to avoid damaging the various oven surfaces on the appliance, do not use unsuitable cleaning products.
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to
clean the appliance. ATTENTION! Unsuitable cleaning agents damage the surfaces of the appliance. Do not use harsh or abrasive cleaning products. Do not use cleaning products with a high alcohol
content.

Do not use hard scouring pads or cleaning sponges.
Do not use any special cleaners for cleaning the appliance while it is hot.
Using oven cleaner in a hot cooking compartment damages the enamel. Never use oven cleaner in the cooking compartment
when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. If different cleaning agents are mixed together, there may be a chemical reaction between these. Do not mix cleaning agents. Completely remove any cleaning agent residue. Salt contained in new sponge cloths may damage surfaces. Wash new sponge cloths thoroughly before use.

Suitable cleaning agents Only use cleaning agents that are suitable for the different surfaces on your appliance.

Follow the instructions on cleaning the appliance. “Cleaning the appliance”, Page 29

Appliance front

Surface Stainless steel
Plastic or painted surfaces Glass

Suitable cleaning agents Information

¡ Hot soapy water

To prevent corrosion, remove any patches of limescale, grease,

¡ Special stainless steel starch or albumin (e.g. egg white) from stainless steel surfaces im-

cleaning products

mediately.

suitable for hot sur- Apply a thin layer of the stainless steel cleaning product.

faces

¡ Hot soapy water

Do not use glass cleaner or a glass scraper. To avoid permanent stains, immediately remove any descaling agent that gets onto the surface.

¡ Hot soapy water

Do not use glass cleaner or a glass scraper.

Appliance door
Area Door panels

Suitable cleaning agents Information

¡ Hot soapy water ¡ Oven cleaner

Do not use a glass scraper or steel wool. Tip: Remove the door panels in order to clean them thoroughly. “Appliance door”, Page 33

Cleaning and servicingen

Area Door cover
Stainless steel interior door frame Door handle Door seal

Suitable cleaning agents Information

¡ Made of stainless

Do not use glass cleaner or a glass scraper.

steel:

Do not use stainless steel care products.

Stainless steel cleaner Made from plastic:

Tip: Remove the door cover for thorough cleaning. “Appliance door”, Page 33

Hot soapy water

¡ Stainless steel cleaner Discolouration can be removed using stainless steel cleaner. Do not use stainless steel care products.

¡ Hot soapy water

To avoid permanent stains, immediately remove any descaling agent that gets onto the surface.

¡ Hot soapy water

Do not remove or scrub.

Cooking compartment

Area Enamel surfaces
Self-cleaning surfaces Shelf supports Pull-out system Accessories Water tank Meat probe

Suitable cleaning agents Information

¡ Hot soapy water ¡ Vinegar solution ¡ Oven cleaner

Soak any heavily soiled areas and use a brush or steel wool. Leave the appliance door open to dry the cooking compartment after cleaning it. Notes ¡ Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of your appliance is not affected by this. ¡ The edges of thin trays cannot be completely enamelled and may be rough. This does not impair the corrosion protection. ¡ Food residues leave a white coating on the enamel surfaces. The coating does not pose a health risk. The functionality of your appliance is not affected by this. You can remove residues with lemon juice.

–

Follow the instructions for self-cleaning surfaces.

“Regenerating self-cleaning surfaces in the cooking compart-

ment”, Page 30

¡ Hot soapy water

Soak any heavily soiled areas and use a brush or steel wool.

Note: To clean thoroughly, detach the shelf supports. “Rails”, Page 36

¡ Hot soapy water

Use a brush to remove heavy soiling. Clean the pull-out rails while they are pushed in so that you do not remove the lubricant. Do not clean in the dishwasher.

Note: To clean thoroughly, detach the pull-out system. “Rails”, Page 36

¡ Hot soapy water ¡ Oven cleaner

Soak any heavily soiled areas and use a brush or steel wool. Enamelled accessories are dishwasher-safe. Do not use stainless steel wool on steam containers made from stainless steel. Use a vinegar solution to remove any dirt on stainless steel steam containers caused by starchy foods (e.g. rice).

¡ Hot soapy water

To remove residual detergent after cleaning, rinse thoroughly with clean water. To dry the water tank after cleaning, leave the water tank to dry with the lid open. Dry the seal on the lid. Do not clean in the dishwasher.

¡ Hot soapy water

Use a brush to remove heavy soiling. Do not clean in the dishwasher.

18.2Cleaning the appliance
In order to avoid damaging the appliance, you must clean your appliance only as specified, and with suitable cleaning products.

WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance.

enCleaning function “EcoClean”

WARNING Risk of fire! Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the
food residues and remnants from the cooking compartment, heating elements and accessories.
Requirement: Read the information on cleaning products. “Cleaning products”, Page 28 1. Clean the appliance using hot soapy water and a
dish cloth. For some surfaces, you can use alternative
cleaning agents. “Suitable cleaning agents”, Page 28 2. Dry with a soft cloth.

Regenerating self-cleaning surfaces in the cooking compartment The back panel, ceiling and side walls in the cooking compartment are self-cleaning and have a coarse surface. ATTENTION! If you do not clean the self-cleaning surfaces regularly, they may become damaged. If dark stains are visible on the self- cleaning sur-
faces, use the cleaning function to clean the cooking compartment. If a prompt to clean appears in the display, use the cleaning function to clean the cooking compartment. Do not use oven cleaner or abrasive cleaning aids. If oven cleaner accidentally comes into contact with the self-cleaning surfaces, dab it off immediately using water and a sponge cloth. Do not rub.
Use the cleaning function. “Cleaning function ‘EcoClean'”, Page 30

19 Cleaning function “EcoClean” Cleaningfunction”EcoClean”

Use the cleaning function “EcoClean” regularly to help retain the cleaning ability of the self-cleaning surfaces and prevent damage. The self-cleaning surfaces in the cooking compartment are coated with a porous, matt ceramic layer and have a rough surface. When the appliance is in operation, the self- cleaning surfaces absorb splashes from roasting or grilling and break them down. The following surfaces are self-cleaning: ¡ Back wall ¡ Ceiling ¡ Side walls ATTENTION! If you do not clean the self-cleaning surfaces regularly, they may become damaged. If dark stains are visible on the self-cleaning sur-
faces, use the cleaning function to clean the cooking compartment. If a prompt to clean appears in the display, use the cleaning function to clean the cooking compartment. Do not use oven cleaner or abrasive cleaning aids. If oven cleaner accidentally comes into contact with the self-cleaning surfaces, dab it off immediately using water and a sponge cloth. Do not rub.
19.1Cleaning recommendation
The appliance records the type and duration of the operation and, if required, recommends which cleaning function to use. When you switch on the appliance, a notification appears on the display stating that you should use the cleaning function. Start the cleaning function as soon as possible. You can use your appliance as normal. However, the cleaning recommendation appears on the display until you have run the cleaning function in full.

Note: If the appliance is prematurely contaminated, e.g. by greasy poultry or roasts, or if dark spots appear on the self-cleaning surfaces, do not wait until the notification appears on the display before you use the cleaning functions. The more often you use the cleaning function, the longer the cleaning ability of the self-cleaning surfaces is retained.
19.2Preparing the appliance for the cleaning function
In order to achieve a good cleaning result, prepare the appliance carefully. ATTENTION! Using oven cleaner on the self-cleaning surfaces damages the surfaces. Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces, dab it off immediately using water and a sponge cloth. Do not rub the surface and do not use abrasive cleaning aids. 1. Remove accessories and cookware from the cooking compartment. 2. Detach the shelf supports and remove them from the cooking compartment. “Rails”, Page 36 3. Remove coarse dirt using soapy water and a soft cloth: From the cooking compartment floor From the inside of the appliance door From the glass cover on the oven lamp This prevents stains that cannot be removed. 4. Remove any objects from the cooking compartment. The cooking compartment must be empty.
19.3Setting the cleaning function
Ventilate the kitchen while the cleaning function is running.

WARNING Risk of burns! The outside of the appliance gets very hot when the cleaning function is in progress. Never touch the appliance door. Allow the appliance to cool down. Keep children at a safe distance. Note: The oven light does not light up while the cleaning function is running. Requirement: “Preparing the appliance for the cleaning function”, Page 30. 1. Press “Cleaning” in the menu. 2. Press “EcoClean”. The duration of 1 hour cannot be changed. You can delay the time at which the operation should be ready. “Setting the end time”, Page 16 3. Press . a A notification stating that you should carry out the necessary preparatory work for the cleaning function appears on the display. 4. Confirm the message.
20 Cleaning aid Cleaningaid
The cleaning aid is a quick alternative for occasionally cleaning the cooking compartment. The cleaning aid softens dirt by evaporating the soapy water. It is then easier to remove the dirt.
20.1Setting the cleaning aid
WARNING Risk of scalding! If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compartment
when the cooking compartment is hot. Note: The oven light does not come on while the cleaning aid is running. Requirement: The cooking compartment must have cooled down completely. 1. Remove any accessories from the cooking compart-
ment. 2. ATTENTION!
Distilled water in the cooking compartment leads to corrosion. Do not use distilled water. Mix 0.4 litres water with a drop of washing-up liquid and pour into the centre of the cooking compartment floor. 3. Press “Cleaning” in the menu. 4. Press “Cleaning aid”. The duration cannot be changed. 5. Press . a A notification stating that you should carry out the necessary preparatory work for the cleaning aid appears on the display.

Cleaning aiden
a The cleaning function starts and the duration counts down.
a A signal tone sounds when the cleaning function has finished. A message appears on the display confirming that the operation has finished.
5. Press to switch the appliance off. 6. “Preparing the appliance after the cleaning func-
tion”, Page 31.
19.4Preparing the appliance after the cleaning function
1. Allow the appliance to cool down. 2. Wipe the cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning surfaces. Residues of sugar and egg white in the food are not removed and stick to the surfaces. Red stains are residues from salty food they are not rust. The stains are not hazardous to health. These marks do not impair the cleaning ability of the selfcleaning surfaces. 3. Attach the shelf supports. “Rails”, Page 36
6. Confirm the message. a The cleaning aid starts and the duration counts
down. a Once the cleaning aid has ended, a signal tone
sounds. A message appears on the display confirming that the operation has finished. 7. Press to switch the appliance off. 8. “Cleaning the cooking compartment after using the cleaning aid”, Page 31.
20.2Cleaning the cooking compartment after using the cleaning aid
ATTENTION! The prolonged presence of moisture in the cooking compartment leads to corrosion. After using the cleaning assistance, wipe the cook-
ing compartment and allow it to dry completely. 1. Allow the appliance to cool down. 2. Wipe out the remaining water in the cooking com-
partment using an absorbent sponge cloth. 3. Clean the smooth enamel surfaces in the cooking
compartment with a dish cloth or a soft brush. Remove stubborn food remnants using a stainless steel scouring pad. 4. Remove limescale with a cloth soaked in vinegar, and wipe this away with clean water. 5. Dry the cooking compartment with a soft cloth. 6. To dry the cooking compartment completely, leave the appliance door open for approx. 1 hour or use the drying function. “Setting the drying process”, Page 32

Descaling

21 Descaling Descaling
Regular descaling is necessary to ensure that your appliance continues to operate correctly. How frequently you need to run the descaling programme depends on the water hardness and how many times you have used the steam- assisted operations. The appliance indicates when only another 5 or fewer steam-assisted operations are possible. If you do not carry out descaling, you can no longer set any operation with steam. Descaling comprises several steps and takes approximately 70 – 95 minutes: ¡ Descaling (approx. 55 – 70 minutes) ¡ First rinse cycle (approx. 8 – 12 minutes) ¡ Second rinse cycle (approx. 8 – 12 minutes) For reasons of hygiene, the descaling programme must be run in full. If descaling is interrupted, you can no longer set any operation. To ensure that the appliance is ready for operation again, carry out 2 rinse cycles.
21.1Preparing descaling
ATTENTION! The length of time for which the descaler is left to work is based on the recommended, liquid descaler. Other descalers may damage the appliance. Only use the liquid descaler recommended by us
for the descaling programme. If descaling solution comes into contact with the control panel or other delicate surfaces, it will damage them. Remove descaling solution immediately with water. 1. Mix the descaling solution:
200 ml liquid descaler 400 ml water 2. Open the control panel.
22 Drying Drying
To prevent residual moisture , dry the cooking compartment following operation with steam and after using the cleaning aid. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation.
22.1Drying the cooking compartment
You can leave the cooking compartment to dry or use the drying function. 1. Allow the appliance to cool down. 2. Remove any dirt from the cooking compartment. 3. Wipe away any water in the cooking compartment. 4. Dry the cooking compartment.
To dry the cooking compartment, leave the appliance door open for 1 hour.

3. Remove the water tank and fill it with descaling solution.
4. Once the descaling solution has been poured into the water tank, slide the tank back in.
5. Close the control panel.
21.2Setting the descaling programme
Requirement: “Preparing descaling”, Page 32 1. Press “Cleaning” in the menu. 2. Press “Descaling”.
The duration cannot be changed. 3. Press . a A notification stating that you should carry out the
necessary preparatory work for descaling appears on the display. 4. Confirm the message. a The descaling programme starts and the duration counts down. a Once the first part of the descaling programme has finished, a signal tone sounds. The appliance prompts you to rinse twice. 5. To rinse the appliance, for each rinse cycle: Open the control panel and remove the water
tank. Thoroughly rinse the water tank and fill it with
fresh water. Slide in the water tank and close the control
panel. a A signal tone sounds when each rinse cycle has
ended. 6. Once the second rinse cycle is complete:
Empty and dry the water tank. “Emptying the water tank”, Page 19
Press to switch the appliance off.
To use the drying function, set “Drying function”. “Setting the drying process”, Page 32
Setting the drying process Requirement: “Drying the cooking compartment”, Page 32 1. Press “Cleaning” in the menu. 2. Press “Drying function”.
The duration cannot be changed. 3. Press . a A notification stating that you should carry out the
necessary preparatory work for the drying appears on the display. 4. Confirm the message. a The drying process starts and the duration counts down. a Once the drying has ended, a signal tone sounds. A message appears on the display confirming that the operation has finished. 5. Press to switch the appliance off. 6. To dry the cooking compartment completely, leave the appliance door open for 1 to 2 minutes.

Appliance dooren

23 Appliance door Appliancedoor
To clean the appliance door thoroughly, you can disassemble the appliance door. Note: Wipe the condensate trough without pressure.

23.1Detaching the appliance door

WARNING Risk of injury!

Components inside the appliance door may have sharp edges. Wear protective gloves. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges.

1. Open the appliance door fully.

WARNING Risk of injury!

When the hinges are not secured, they can snap

shut with great force.

Make sure that the locking levers are always

either fully closed or (when detaching the oven

door) fully open.

Open the locking levers on the left- and right-hand hinges.

Locking levers opened

Locking levers closed

The hinge is now secured and cannot snap shut.

3. Close the appliance door fully . Grab hold of the appliance door with both hands (on the left and right) and pull it upwards and out .
4. Carefully place the appliance door on a level surface.
Removing the condensate tray Notes ¡ Wipe down the condensate tray after every steam
operation or before removing it. ¡ Do not clean the condensate tray in the dishwasher Requirement: The appliance door must be removed. 1. Press on the left-hand pressure surface until
the hook is released. 2. Press on the right-hand pressure surface until
the hook is released.

The appliance door is secured and cannot be detached. a The locking levers are open. The hinges are now secured and cannot snap shut.

3. Tilt the condensate tray forwards slightly until the lower retaining hooks are released.
4. Use both hands to pull the condensate tray upwards and out at an angle .

enAppliance door
Installing the condensate tray 1. Use both hands to insert the condensate tray at
an angle .

3. Close the locking levers on the left- and right-hand hinges .

2. Snap the hooks on the left and right of the condensate tray into the gap .
3. Push the condensate tray until the hooks on the right, left and bottom click into place.
a The condensate tray is installed horizontally.
23.2Attaching the appliance door
WARNING Risk of injury! The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. When the hinges are not secured, they can snap shut with great force. Make sure that the locking levers are always either
fully closed or (when detaching the oven door) fully open. 1. Slide the appliance door straight onto the two hinges . Slide the appliance door on as far as it will go. 2. Open the appliance door fully.

a The locking levers are closed. The appliance door is secured and cannot be detached.
4. Close the appliance door.
23.3Removing the door panes
WARNING Risk of injury! The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves. 1. Open the appliance door fully. 2. Open the locking levers on the left- and right-hand
hinges . a The locking levers are open. The hinges are now se-
cured and cannot snap shut. 3. Close the appliance door fully .
4. Push on the left- and right-hand side of the door cover from the outside until it is released.
5. Remove the door cover .

6. Lift out the inner pane and set it down carefully on a flat surface.
34

7. Lift out the intermediate pane and set it down carefully on a flat surface.

Appliance dooren
23.4Fitting the door panes
WARNING Risk of injury! The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves. 1. Open the appliance door fully. 2. Place the condensate trough vertically into the re-
tainer and turn it downwards.

8. Open the appliance door and remove the door seal.

9. If necessary, you can remove the condensate trough for cleaning. Open the appliance door. Tilt the condensate trough upwards and remove it.

3. Slide the intermediate pane into the left- and righthand retainers .

4. Push the intermediate pane upwards until it is in the left- and right-hand retainers .

WARNING Risk of injury!

Scratched glass in the appliance door may develop

into a crack.

Do not use any harsh or abrasive cleaners or

sharp metal scrapers to clean the glass on the

oven door, as they may scratch the surface.

Clean the removed door panels on both sides with glass cleaner and a soft cloth. 11. Clean the condensate trough with a cloth and hot soapy water. 12. Clean the appliance door. “Suitable cleaning agents”, Page 28 13. Dry the door panels and refit them. “Fitting the door panes”, Page 35

enRails 5. Open the appliance door and attach the door seal.

7. Push the inner pane upwards until it is in the leftand right-hand retainers .

6. Note: When sliding the pane in, ensure that the glossy side of the pane is on the outside and the cut-outs on the left and right are at the top. Slide the inner pane into the left- and right-hand retainers .

8. Put the door cover into position and push down on it until you hear it click into place.
9. Open the appliance door fully. 10. Close the locking levers on the left- and right-hand
hinges .

24 Rails Rails
To thoroughly clean the rails and the cooking compartment, or to replace the rails, you can remove the rails.
24.1Detaching the rails
WARNING Risk of burns! The shelf supports get very hot Never touch the shelf supports when hot. Always allow the appliance to cool down. Keep children at a safe distance. 1. Lift the rail forwards slightly and detach it .

a The locking levers are closed. The appliance door is secured and cannot be detached.
11. Close the appliance door. Note: Do not use the cooking compartment again until the door panes have been correctly fitted.
2. Pull the whole rail to the front and remove it.

3. Clean the rail. “Cleaning products”, Page 28
24.2Attaching the rails
Notes ¡ The rails only fit on the right or left. ¡ For both rails, ensure that the curved rods are at the
front.
36

1. First, push the rail into the middle of the rear socket until the rail rests against the cooking compartment wall, and then push this back .
2. Push the rail into the front socket until the rail also rests against the cooking compartment wall, and then press this downwards .

Railsen 2. Press and hold PUSH and swing the rail out-
wards until the front retainer is detached.
a

3. Pull the rail out towards the front.

24.3Removing the pull-out rail
WARNING Risk of burns! The shelf supports get very hot Never touch the shelf supports when hot. Always allow the appliance to cool down. Keep children at a safe distance. ATTENTION! The self-cleaning surfaces in the cooking compartment may be damaged by detaching and attaching the pullout rails. Detach the rails before detaching or attaching the
pull-out rails. Notes ¡ Depending on the appliance type, you must change
the basic settings for the telescopic rails for appliances with rails and pull-out rails. “Basic settings”, Page 25 ¡ The pull-out rails can be installed at any level as required. ¡ If necessary, you can equip all levels with a pull-out rail. 1. Push on the side of the tab marked PUSH behind the rail, and push the rail to the rear.

4. Remove the pull-out rail.
5. Clean the pull-out rail. “Cleaning products”, Page 28
Note: Further information:

24.4Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make sure when you fit them that you can pull them out towards the front.

enTroubleshooting 1. Guide the pull-out rail with the rear retainer from
below behind the two guide rods for the required shelf position and keep it horizontal.

3. Press and hold PUSH and swing the pull-out rail inwards until the retainer is attached in the lower rod.

2. Guide the rail lengthways to the rear to the guide rods, and slide both retainers onto each lower rod. In doing so, use the rear retainer to grip the vertical rod.

4. Release the PUSH tab.

a The retainer clicks into place. 5. Pull the pull-out rail out as far as it will go and slide
it back in. Note: Further information:

25 Troubleshooting Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
“Customer Service”, Page 41

WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.

25.1Malfunctions

Fault The appliance is not working.

Cause and troubleshooting
The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your room or other appliances are working.

Troubleshooting

Fault The appliance is not working. “Sprache Deutsch” appears in the display. The operation does not start or is interrupted. Appliance does not heat up.
The time is not displayed when the appliance is switched off. Home Connect is not working properly. The control panel cannot be opened.
Intense steam generation when steaming.
The appliance requests descaling without the counter appearing in advance. The appliance prompts you to rinse it.

Cause and troubleshooting Electronics fault 1. Disconnect the appliance from the power supply for at least 30 seconds by switching off
the fuse. 2. Reset the basic settings to the factory settings.
“Basic settings”, Page 25
There has been a power cut. Configure the initial configuration settings.
“Performing initial start-up”, Page 13
Different causes are possible. Check the notifications that appear on the display.
“Displaying information”, Page 15
Malfunction Call
“Customer Service”, Page 41.
Demo mode is switched on. 1. Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again. 2. Switch off demo mode in the basic settings within approx. 5 minutes.
“Changing the basic settings”, Page 26
There has been a power cut. Open and close the appliance door once after a power failure. a The appliance is checked and is ready to use.
Basic setting has been changed. Change the basic setting for the time display.
“Basic settings”, Page 25
Different causes are possible. Go to www.home-connect.com. The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your room or other appliances are working. Malfunction 1. Call the after-sales service.
“Customer Service”, Page 41 2. If there is water in the water tank, empty the water tank:
Open the appliance door. Grip on the right and left below the control panel. Slowly pull out the control panel and push it upwards.
The appliance is automatically calibrated. No action required.
If the cooking times are too short, the appliance is not automatically calibrated. If a lot of steam is generated repeatedly, the appliance is recalibrated. 1. Reset the appliance to the factory setting.
“Basic settings”, Page 25 2. Repeat the calibrations.
“Before using for the first time”, Page 13
The set water hardness range is too low. 1. Descale the appliance.
“Descaling”, Page 32 2. Check the water hardness and set this in the basic settings.
“Basic settings”, Page 25
During the descaling, the power supply is interrupted or the appliance is switched off. Rinse the appliance.
“Descaling”, Page 32

enTroubleshooting

Fault

Cause and troubleshooting

“Fill water tank” appears in the display even though the water tank has been filled.

The water tank has not clicked into place. Insert the water tank correctly so that it engages in the holder.
“Filling the water tank”, Page 17
The water tank has fallen out. Shaking has caused parts to come loose in the water tank. The water tank is leaking.

Order a new water tank. “Customer Service”, Page 41

Malfunction

Do not use deionised or filtered water. “Determining the water hardness before switching on the appliance for the first time”, Page 13

The sensor is defective.

Call “Customer Service”, Page 41.

Buttons are flashing.

Condensation has formed behind the control panel. No action required. As soon as the condensation has evaporated, the buttons no longer flash.

“Plopping” sounds can be heard when cooking with steam.

Water vapour requires the cold/heat effect for frozen food. No action required.

The appliance hums Functional test of the pump creates operating noise. during operation and No action required. after it is switched off.

The interior lighting does not work.

Basic setting has been changed. Change the basic setting for the lighting.
“Basic settings”, Page 25

The LED light is defective.

Call “Customer Service”, Page 41.

Maximum operating time reached.

To prevent an unwanted permanent operation, the appliance automatically stops heating after several hours if the settings are unchanged. A message appears in the display. The point at which the maximum operating time is reached is determined by the corresponding settings for an operating mode. 1. To continue operation, switch the appliance off and on again using . Reset and start
the operation. 2. If you do not need to use the appliance, press to switch it off.

Tip: To prevent the appliance from switching off when you do not want it to, set a cooking time. “Time-setting options”, Page 16

Error code made up of letters and numbers appears on the display, e.g. E0111.

The electronics have detected a fault. 1. Switch the appliance off and on again. a If the fault was a one-off, the message disappears. 2. If the message appears again, call the after-sales service. Please specify the exact error
message when calling. “Customer Service”, Page 41

The cooking result is Settings were unsuitable.

not satisfactory.

Adjustment values, e.g. temperature or cooking time, depend on the recipe, quantity and

food.

Next time, set lower or higher values. Tip: A lot of other information about the preparation, corresponding adjustment values and recipes can be found in the Home Connect app or on our website www.boschhome.com.

Disposal

26 Disposal Disposal
26.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

CustomerService
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website. This product contains light sources from energy efficiency class G. These light sources are available as a spare part and should only be replaced by trained specialist staff.

27.1Product number (E-Nr.), production number (FD) and consecutive numbering (ZNr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (ZNr.) on the appliance’s rating plate. You will see the rating plate with these numbers if you open the appliance door. On some appliances with steam-assisted cooking, you will find the rating plate behind the control panel.
Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly. You can also display the appliance information in the basic settings. “Basic settings”, Page 25

28 Information regarding Free and Open Source Software InformationregardingFreeandOpenSourceSoftware

This product includes software components that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

1 Depending on the appliance specifications 41

enDeclaration of Conformity

29 Declaration of Conformity DeclarationofConformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your appliance.

5 GHz WLAN (Wi-Fi): For indoor use only.

2.4 GHz band (24002483.5 MHz): Max. 100 mW 5 GHz band (51505350 MHz + 54705725 MHz): max. 200 mW

UK (NI)

5 GHz WLAN (Wi-Fi): For indoor use only.

29.1Statement of Compliance for Great Britain
Product type This statement of compliance covers the products described in this information for use whose model identifier group is seen on the title page. The full model identifier is made up of the characters before the slash in the product number (E no.) which can be found on the rating plate. Alternatively, you can also find the model identifier in the first line of the UK Energy Label. Name and address of manufacturer BSH Hausgeräte GmbH, Carl- Wery-Strasse 34, 81739 München, Germany

This statement of compliance is prepared by the manufacturer. The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and,
where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1; ¡ provision 5.3-13 of ETSI EN 303 645 v2.1.1. Support period BSH Hausgeräte GmbH will provide security updates that are necessary to maintain the main functions free of charge until at least 28/02/2034.

30 How it works Howitworks
Here, you can find the ideal settings for various types of food as well as the best accessories and cookware. We have perfectly tailored these recommendations to your appliance. Tip: A lot of other information about the preparation, corresponding adjustment values and recipes can be found in the Home Connect app or on our website www.bosch-home.com.
30.1General cooking tips
Take note of the following information when cooking all types of food. ¡ The temperature and cooking time depend on the
amount of food and the recipe. Settings ranges are specified for this reason. Try using the lower values to start with. ¡ The setting values apply to food placed in the cooking compartment while the cooking compartment is still cold. If you want to preheat anyway, do not place accessories into the cooking compartment until it has finished preheating.

¡ Remove any accessories that are not being used from the cooking compartment.
You can buy suitable accessories from customer service, from specialist retailers or online. “Other accessories”, Page 12
30.2Baking tips
¡ Dark-coloured metal baking tins are most suitable for baking cakes, bread and other baked goods.
¡ Use wide, shallow cookware for bakes and gratins. Food takes longer to cook in deep, narrow cookware and it browns more on top.
¡ Silicone moulds are not suitable. ¡ If you are cooking bakes directly in the universal
pan, place the universal pan into the cooking compartment at level 2. ¡ The setting values for bread dough apply to both dough placed on a baking tray and dough placed in a loaf tin.

ATTENTION! When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage. Never pour water into the cooking compartment
when it is still hot. Never place cookware containing water on the
cooking compartment floor.
Shelf positions If you are using the 4D hot air type of heating, you can choose between shelf positions 1, 2, 3 and 4. You will obtain the best results if you use the following shelf positions.

Baking on one level Tall baked items and tins/dishes on the wire rack Shallow baked items/baking tray

Height 2
3

Baking on two or more levels 2 levels ¡ Universal pan ¡ Baking tray 2 levels ¡ Baking tins/dishes on 2 wire
racks 3 levels ¡ Baking tray ¡ Universal pan ¡ Baking tray 4 levels ¡ 4 wire racks with greaseproof pa-
per

Height 3 1 3 1 5 3 1 5 3 2 1

Use the 4D hot air heating function. Note: Items that are placed in the appliance on baking trays or in baking tins/dishes at the same time will not necessarily be ready at the same time.
30.3Roasting, braising and grilling tips
¡ The recommended settings are for fridge-temperature food and unstuffed, oven-ready poultry.
¡ Place the poultry onto the cookware breast-side or skin-side down.
¡ Turn roasting joints, grilled items or whole fish after approx. ½ to of the specified time.
¡ The meat probe allows you to cook with absolute precision. Take note of the important information on using it correctly. Page 20
Roasting on the wire rack Food roasted on the wire rack will become very crispy on all sides. You can roast large poultry, for example, or multiple individual pieces at the same time. ¡ Roast pieces of a similar weight and thickness. The
grilled food will brown evenly and will remain succulent and juicy.

How it worksen
¡ Place the food to be roasted directly on the wire rack.
¡ To catch any liquids that drip down, place the universal pan, with the wire rack inside it, into the cooking compartment at the specified shelf height.
¡ Add up to ½ litre of water to the universal pan, depending on the size and type of food that you want to roast. You can make a sauce from the juices that are collected. This also means that less smoke is produced and the cooking compartment does not become as dirty.
Roasting in cookware If you cover the cookware when you cook your food, this will keep the cooking compartment cleaner.
General information about roasting in cookware ¡ Use heat-resistant, ovenproof cookware. ¡ Place the cookware on the wire rack. ¡ Glass cookware is best. ¡ Follow the manufacturer’s instructions for your roast-
ing dishes. Roasting in uncovered cookware ¡ Use a deep roasting dish. ¡ If you do not have any suitable cookware, you can
use the universal pan. Roasting in covered cookware ¡ Use a suitable lid that seals well. ¡ When roasting meat, there should be at least 3 cm
between the food and the lid. The meat may expand.
WARNING Risk of scalding! Very hot steam may escape when the lid is opened after cooking. Steam may not be visible, depending on the temperature. Lift the lid in such a way that the hot steam can es-
cape away from you. Keep children away from the appliance. Grilling Grill food if you want it to be crispy. The “Grill” type of heating is good for cooking thinner pieces of poultry, meat and fish such as steaks, drumsticks and burgers. It is also excellent for toasting bread. Circulated air grilling is very well suited to cooking whole poultry and fish, as well as meat, e.g. roast pork with crackling. ¡ When grilling severa

BOSCH HSG758D.1A Combi Steam Oven User Manual

BOSCH HSG758D.1A Combi Steam Oven

Product Information

Product Usage Instructions

FAQs

Safety

Preventing material damage

Environmental protection and saving energy

Familiarising yourself with your appliance

Operating modes

Accessories

Before using for the first time

Basic operation

Time-setting options

Meat probe

Dishes

Home Connect

Cleaning and servicing

Descaling

Troubleshooting

Disposal

Customer Service

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Bosch User Manuals

Related Manuals