ELSYS ELT-2 Dual PT1000 Module Instruction Manual
- June 1, 2024
- ELSYS
Table of Contents
ELSYS ELT-2 Dual PT1000 Module
Product Information
Specifications:
- Product: Dual PT1000 Module
- Published Date: 16 January 2024
- Compatibility: Fits inside ELT-2
- Sensor Compatibility: PT1000 platinum sensors
Features:
- Accuracy
- Designed for connecting one or two PT1000 platinum sensors
Usage Instructions
Connection of one PT1000:
- Locate the module slot inside the ELT-2.
- Insert the PT1000 sensor into the designated slot on the Dual PT1000 Module.
- Ensure the connection is secure and properly aligned.
- Follow any additional setup instructions provided in the ELT-2 manual.
Connection of two PT1000:
- Repeat steps 1-3 from the “Connection of one PT1000” section for the first sensor.
- Insert the second PT1000 sensor into the second designated slot on the Dual PT1000 Module.
- Verify both connections are secure and correctly positioned.
- Proceed with any necessary configuration steps as outlined in the ELT-2 manual.
Contact Information:
- Address: www.elsys.se
- Webpage: www.elsys.se/shop
- E-mail: support@elsys.se
Specifications in this document are subject to change without notice.
FAQ:
- Q: Can the Dual PT1000 Module be used with sensors other than PT1000?
A: No, the Dual PT1000 Module is specifically designed for use with PT1000 platinum sensors and may not be compatible with other sensor types.
Published: 16 January 2024
The Dual PT1000 module is a module that fits inside the ELT-2 and is intended
for connecting one or two PT1000 platinum sensors.
Features
- Easy use with PT-1000 (RTD platinum sensor)
- 2-wire connection
- Measures -200 to 400 °C
- Fits inside the ELT-2 box
- Powered by the ELT-2 internal battery
- Very low energy consumption
- Terminal block for easy connection
Accuracy
- ± 0.1 °C (-40 to 200°C) + sensor deviation.
- ± 0.5 °C (full span) + sensor deviation.
Using the module
- Set external sensor in the ELT2 to ”Dual PT1000”.
- Read temperature value from RTD1 in degrees Celsius with data type “External temperature” (0x0C)
- Read temperature value from RTD2 in degrees Celsius with data type “External temperature 2” (0x19)
OVERVIEW
Connection of one PT1000
Connection of two PT1000
Address
Tvistevägen 48 90736 Umeå Sweden
Webpage
www.elsys.se
www.elsys.se/shop
E-mail
support@elsys.se
Specifications in this document are subject to change without notice.
©Elektroniksystem i Umeå AB 2023
References
Read User Manual Online (PDF format)
Loading......