FISHER PAYKEL AHP3RD2484WBA Professional Round Flush Handle Kit User Guide
- June 1, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL AHP3RD2484WBA Professional Round Flush Handle Kit
Product Information
Specifications
- Product Name: Professional Round Flush Handle Kit for Integrated Refrigerator Freezer, 24
- SKU: 26772
- Material: Stainless steel handles with brass-colored off-stands
- Finish: Brushed satin with PVD coating
- Quantity: Two pieces supplied
- Compatibility: Designed for the Integrated Refrigerator Freezer, 24
Product Usage Instructions
Installation
- Ensure the Integrated Refrigerator Freezer, 24 is powered off and unplugged.
- Remove any existing handles from the appliance if necessary.
- Align the new handle kit with the pre-drilled holes on the refrigerator door.
- Secure the handles in place using the provided screws or mounting hardware.
- Tighten all screws to ensure a secure fit.
Cleaning and Maintenance
- Use a mild detergent and a soft cloth to clean the handle kit.
- Avoid abrasive cleaners that may damage the finish.
- Regularly check the screws for tightness to prevent loosening over time.
Compatibility
- This handle kit is specifically designed for use with the Integrated Refrigerator Freezer, 24 model.
- Ensure compatibility before installation.
Customization
- The brushed satin finish and brass off-stands of this handle kit allow you to customize your appliance to complement your kitchen’s interior design, whether it’s light or dark.
FAQ
- Q: Can this handle kit be used on other refrigerator models?
- A: This handle kit is designed specifically for the Integrated Refrigerator Freezer, 24 model. It may not be compatible with other models.
- Q: Is professional installation required for attaching the handle kit?
- A: While professional installation is recommended for best results, users with basic DIY skills can install the handle kit following the provided instructions.
Introduction
Customize your Integrated Refrigerator Freezer, 24″ to complement your kitchen interior with this Handle Kit, featuring a brushed satin finish and brass off- stands.
- Designed for the Integrated Refrigerator Freezer, 24″
- Stainless steel handles with brass-coloured off-stands, ideal for both light and dark kitchens
- PVD coated
- Two pieces supplied
| SKU | 26772 |
|---|
The product dimensions and specifications on this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. Fisher & Paykel Appliances Ltd 2020
Where applicable
All appliances use energy, and energy usage typically generates carbon emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy. This is calculated either annually or per cycle, using the product’s market-specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region. Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products. For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.
Other product downloads available at fisherpaykel.com
A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872 W www.fisherpaykel.com.