UGREEN AB0538 7×10.5 cm Wireless Charger Instructions
- June 1, 2024
- UGREEN
Table of Contents
UGREEN AB0538 7×10.5 cm Wireless Charger
Product Information
Specifications :
- Product model : 2457
- Main functions: wireless charging transmitter
- Standard version: WPC – 1.1
- Charging type: one-on-one charge corresponding area
- Input Specs : 5V 2A, 9V 2A
- USB Output : 5V 1A
- TYPE-C 2 Output : 5V 1A
- Output Specs : 5V 1A, 9V 1.1A, 9V 1.67A
- Output Effective Distance: 4 to 6 MM
- Conversion efficiency: 70%
- Charging methods: induction model
- Working frequency: 111.5-205KHZ
- Accessories: USB cable, Wireless charging pad, Packing box, and instruction sheet
Product Usage Instructions
- Connect the wireless charging pad to a power source using the included TYPE-C cable.
- The charging pad will enter standby mode with a white indicator flash.
- Place your portable device in the center area of the charging pad.
- Charging will begin with a white color indicator light on.
FAQ
Q: What should I do if the charging pad is not working?
A: If the charging pad is not working, try the following troubleshooting steps:
- Check the power source and ensure it is connected properly.
- Make sure the portable device is placed correctly on the charging pad.
- Verify that the indicator light is on when charging.
- If issues persist, contact customer support for further assistance.
- Q: Can I use any power adapter with the wireless charger?
- A : It is recommended to use the provided TYPE-C cable and a compatible power adapter to ensure optimal performance and safety.
Wireless Charger Instruction Sheet
The diagram of an installation
Wireless Charger`s Charging Method
- Connect the wireless charging pad to a power source via the included TYPE-C cable. Charging pad entering standby mode with a white indicator flash.
- Place your portable device in the center area of the charging pad, charging begins with a white color indicator light on.
Product Specs
- Product model: 2457
- Main functions: wireless charging transmitter;
- Standard version: WPC – 1.1;
- Charging type: one-on-one charge corresponding area;
- Input Specs: 5V 2A,9V 2A;
- USB Output: 5V 1A;
- TYPE-C 2 Output: 5V 1A;
- Output Specs: 5V 1A, 9V 1.1A, 9V 1.67A, output
- Effective Distance: 4 to 6 MM；
- Conversion efficiency: ≥70%；
- Charging methods : induction model;
- Working frequency: 111.5-205KHZ; Accessories: USB cable;
- Wireless charging pad ; Packing box, and instruction sheet.
Warning!
This wireless charger is designed to charge Qi-compatible mobile phones. Not for use with Airpods®, Airpod Pros® or other earphones with wireless charging cases. AirPods is a trademark of Apple Inc., registered in the U.S. and other countries.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received,
including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The distance between user and products should be no less 20cm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>