VOLLRATH JW1 Cheese Melters Instruction Manual

: June 1, 2024
: VOLLRATH

Table of Contents

VOLLRATH JW1 Cheese Melters
Product Usage Instructions
FUNCTION AND PURPOSE
OPERATION
TROUBLESHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLLRATH JW1 Cheese Melters

Specifications:

Model: JW1, JW2
Overall Width: 20 inches (JW1), 26 inches (JW2)
Voltage: JW1 – 120V, JW2 – 120V or 230V (various options)
Plug Type: JW1 – NEMA 5-15 or UK Schuko, JW2 – NEMA 5-15 or UK Schuko

Product Usage Instructions

CLEARANCE AND ENVIRONMENT REQUIREMENTS

Ensure the oven is placed on non-combustible surfaces with adequate clearance on all sides. Avoid proximity to heat-producing appliances or combustible materials.

SET UP: Install the Shelf

Slide the shelf into the oven for proper setup.

FEATURES

Front View: A Fan, B Timer, C Adjustable Shelf, D On/Off Switch, E Reset Button

Back View : A Fan

BEFORE FIRST USE

Clean the oven thoroughly before initial use. Refer to the cleaning instructions provided on page 3 of the manual.

OPERATION

CAUTION: Avoid touching the equipment during operation to prevent burns from hot surfaces.

Preheat

Plug the oven into a grounded electrical outlet matching the rated voltage.
Adjust the shelf to the desired position.
Turn the On/Off switch to ON. One heater element will activate in standby mode.
Set the timer for the required duration to reach full power.

Melt Cheese, Finish Cooked Food

Place food in an oven-proof pan on the shelf.
Set the timer accordingly for melting cheese or finishing cooked food.
Once the timer ends, the oven will go into standby mode.
Switch OFF the oven when done using it.

FAQ

Q: Can this equipment be used for baking or cooking raw food?
- A: No, this equipment is designed for melting cheese or warming plates in commercial food service operations only.
Q: What should I do if the oven is not heating up properly?
- A: Ensure the oven is plugged into a correctly rated electrical outlet and that the voltage matches the unit’s specifications. If issues persist, contact customer support for assistance.

Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that will or can cause severe personal injury or death.

CAUTION

Caution is used to indicate the presence of a hazard that will or can cause minor or major personal injury if the caution is ignored.

NOTICE : Notice is used to note information that is important but not hazard-related.

To reduce the risk of injury or damage to the equipment

Plug only into grounded electrical outlets matching the voltage on the rating plate.
Use this equipment in a flat, level position.
Unplug equipment and let it cool before cleaning or moving.
Equipment remains hot after it is turned off.
Unplug when not in use.
Keep equipment and power cord away from open flames, electric burners or excessive heat.
Do not operate unattended.
Closely supervise equipment operating in public areas and/or around children.
Do not operate if equipment has been damaged or is malfunctioning.

FUNCTION AND PURPOSE

This equipment is intended to melt cheese or warm plates in medium-volume food service operations and restaurants. It is not intended to bake food or cook raw food. It is intended for use in commercial foodservice operations only. It is not intended for household, industrial or laboratory use.

Item No.

|

Model

| Overall Width|

Voltage

|

Plug

---|---|---|---|---
CM2-12020|

JW1

| 20″

(50.8 cm)

JW2

| 26″

(66 cm)

CLEARANCE AND ENVIRONMENT REQUIREMENTS

Do not place oven on surfaces or near walls, partitions or kitchen furniture unless they are made of non-combustible material or clad with non-combustible heat-insulating material. Ovens must not be used near or below curtains and other combustible materials.

Do not place the oven adjacent to a heat-producing appliance. Allow a minimum of 8 inches (20.3 cm) of clearance on the left and right sides of the oven.

SET UP

Install the Shelf

Slide the shelf into the oven.

FEATURES

$VOLLRATH-JW1-Cheese-Melters-fig $1$$

A Fan
B Timer
C Adjustable Shelf
D On/Off Switch
E Reset Button

BEFORE FIRST USE

Clean the oven. See “Cleaning”.

OPERATION

$VOLLRATH-JW1-Cheese-Melters-fig $2$$

Preheat

Plug the oven into a grounded electrical outlet that matches the rating on the nameplate found on the oven.
- NOTICE: Using a voltage other than the nameplate-rated voltage will cause damage to the unit. Incorrect voltage, modification to the power cord or electrical components can damage unit and will void the warranty.
Adjust the shelf to the desired position.
Press the On/Off switch to the ON position. One heater element will turn on and the oven will be in standby mode.
Set the timer for 10 minutes. The second element will turn on and the oven will be full power.

Melt Cheese, Finish Cooked Food

Place the food on or in an oven-proof pan and place the pan on the shelf.
Set the timer to the appropriate length of time to melt cheese, brown or finish cooked food items.
When the time on the timer has expired, the oven will enter a standby mode.
When finished using the oven, press the On/Off switch to the OFF position.

CLEANING

$VOLLRATH-JW1-Cheese-Melters-fig $3$$

NOTICE: Do not use abrasive materials, scratching cleansers or scouring pads to clean the equipment. These can damage the finish.

Press the On/Off switch to the OFF position.
Unplug the oven.
Let the oven cool completely.
Slightly dampen a soft cloth with warm water.
Use the dampened cloth to clean the interior and exterior of the oven, and the air intake on the side of the oven
Remove the shelf and clean with warm soapy water.

TROUBLESHOOTING

$VOLLRATH-JW1-Cheese-Melters-fig $4$$

$VOLLRATH-JW1-Cheese-Melters-fig $5$$

SERVICE AND REPAIR

When under warranty, repair is available for this product via carry-in service. To begin the process:

Contact Vollrath Technical Services at 1-800-309-2250. Please be ready with the item number, model number and serial number. You can find this information on the nameplate located on the side or back of the equipment. Also please provide a proof of purchase indicating the date the equipment was purchased.
A technical services representative will help you troubleshoot the problem over the phone.
If the representative determines the issue require professional service, he or she will help you locate an authorized service center.
Contact the authorized service center and transport the equipment to the authorized service center. Vollrath will cover the cost to repair and/or replace defective parts within the equipment warranty period. The cost of transporting the equipment to and from the service center is not covered by the warranty.

WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.

The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt. Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.

The warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
Heater Tubes: The warranty period is 1 year, including labor when performed at an authorized service center. Heater tube glass damage is not covered by this warranty. Customer is responsible for the cost of transporting the product to the authorized service center.

Warrantied Parts : The warranty period is 2 years parts, 1 year labor.

For complete warranty information, product registration and new product announcement, visit www.vollrath.com.

The Vollrath Company, L.L.C. Headquarters 1236 North 18th Street Sheboygan, Wisconsin 53081-3201 USA