VOLLRATH HDCCB-60 Heated Disp Case Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH HDCCB-60 Heated Disp Case
DESCRIPTION
| SN | PART NO. | DESCRIPTION | QTY. |
|---|---|---|---|
| 1 | RDC0357-60 | 60″ CUBED DOOR ASM | 2 |
| 2 | RDC0084-60S | 60″ LED 0.15M | 1 |
| 3 | RDC0084-60L | 60″ LED 0.50M | 2 |
| 4 | RDC0335-60 | 60″ CUBEED TOP SHELF ASM | 2 |
| 5 | RDC0356-60 | 60″ CUBED BOTTOM SHELF | 1 |
| 6 | RDC0042-60 | 60″ AIR OUTLET DUCT | 1 |
| 7 | RDC0088-60 | 60″ REAR AIR GRILL | 1 |
| 8 | RDC0163 | EVAPORATOR FAN | 3 |
| 9 | HDC0454 | HDE HEATING ELEMENT ASM | 2 |
| 10 | RDC0501 | POWERCORD W/STRAIN RELIEF | 1 |
| 11 | RDC0503 | DIGITAL CONTROLLER, HDC | 1 |
| 12 | RDC0115-60 | 60″ BOTTOM DOOR TRACK | 1 |
| 13 | RDC0128-60 | 60″ BACK SLDNG DOOR TRACK UP | 1 |
| 14 | RDC0521 | FRONT GLASS KIT, HDCCB-60 | 1 |
| 15 | RDC0414 | RDCCB END GLASS ASM-R | 1 |
| 16 | RDC0413 | RDCCB END GLASS ASM-L | 1 |
| 17 | RDC0522 | GLASS HARDWARE | 6 |
| 18 | 2351601 | 4 INCH LEG ADJUSTABLE FOOT | 4 |
| 19 | RDC0141 | RDE HDE NTC SENSOR | 1 |
| 20 | RDC0155 | REAR DOOR SLIDER BTM WHEEL | 4 |
| 21 | RDC0145 | POWER FOR LED | 1 |
| 22 | RDC0355-60 | 60″ CUBED STAINLESS WRAP | 1 |
| 23 | RDC0127-60H | 60″ HDE BACK VENT PANEL REAR | 1 |
| 24 | RDC0362 | CUBED DOOR GASKET | 4 |
| 25 | RDC0086-60H | 60″ HDE FAN PANEL ASM | 1 |
| 26 | RDC0040 | HDE TERMINAL BLOCK | 1 |
| 27 | RDC0066 | 3-PIN LED LIGHT SOCKET | 3 |
| 28 | 353200-1 | HOT HOLDING THERMOMETER | 1 |
| 29 | RDC0523 | SLOT PLUG, QTY. 4 | 2 |
SPECIFICATION
| ITEM NO. | MODEL NO. | DESCRIPTION | VOLTAGE | CURRENT | POWER | CORD PLUG |
|---|---|---|---|---|---|---|
| HDCCB-60 | HDC9360 | CUBED COUNTERTOP 60″ | 120V | 5.8A | 700W | 5-15P |
Product Usage Instructions
Assembly Instructions
- Refer to the user manual for detailed assembly instructions.
- Ensure all parts are included as per the parts list.
- Follow step-by-step instructions to assemble the heated dispensing case.
Operation
- Plug in the power cord to a compatible outlet (120V).
- Turn on the device using the digital controller (if equipped).
- Set the desired temperature for heating or holding food items.
- Load the food items into the designated shelves of the dispensing case.
Cleaning and Maintenance
- Unplug the device before cleaning.
- Use a damp cloth with mild detergent to clean the exterior surfaces.
- Regularly clean the shelves and internal components to ensure hygiene.
- Follow specific maintenance instructions provided in the user manual.
Frequently Asked Questions (FAQ)
Q: Can I adjust the temperature settings on this dispensing case?
A: Yes, you can set and adjust the temperature using the digital
controller.
Q: How do I replace a part if it gets damaged?
A: Refer to the user manual for instructions on replacing specific parts.
If unsure, contact customer support for assistance.
Q: Is it safe to leave the dispensing case unattended while in operation?
A: It is recommended to not leave the device unattended while in operation
for safety reasons.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>