OUMU L60 Bluetooth Earphones User Manual
- June 1, 2024
- OUMU
Table of Contents
OUMU L60 Bluetooth Earphones
USER MANUAL
Charging
1. Connect the charger cable to the headphone charging jack.
2. When charging, the indicator light is displayed in red, when fully
charged, it is displayed in blue, or the red light is off
On/Off
1. Press and hold the multi-functional button on the front of the earphones
for about 5 seconds, the red and blue lights alternately flash and there is a
voice prompt of “turn on”. At this time, the Bluetooth earphones are turned
on.
2. Turn off. Press and hold the multi-functional button on the front of the
earphones for about 10 seconds, the red light remains on for 1 second, and
there is a voice prompt of “turn off”. At this time, the Bluetooth earphones
are turned off
Bfuetooth rnode| Bluetooth 5.:3| Wearing meU,od| Patented pr(){Jl1ctfor In ear
/clip earphones
---|---|---|---
B.Juetooth version| Hands.free/Headset| Transmission po11,er| Class2
transmission distance| Linear Iransmission distance Sta 10,meters| lntclllgonl
promot| DevIce ,vorking status
VOICOprompVcallor ID
Charging p-011,er supply| Full ror 1 t,iatJr| Av.ailable models| 95% of
61uetooth equippe(I
electronle d6,’t’ices on the mark-e1
Pairing and connecting with a mobile phone
1. When the Bluetooth headset is turned on and the red and blue lights flash,
turn on the Bluetooth settings function of the phone and search for Bluetooth
devices.
2. Find the name of the Bluetooth earphone device in the mobile phone
Bluetooth search list, click to pair, and there will be a voice prompt saying
‘Connected’
Answer and hang up
1. Answer a call: When making a call, briefly press the multifunction button
once to answer it.
2. Hang up: When making a call or making a call, briefly press the
multifunction button once to hang up
Redial, playback pause
1. Redial: Quickly press the multifunction key twice to redial the most
recent call.
2. Pause playback: When playing music, briefly press the multifunction key
once to pause playback
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or reloca te the receiving antenna.
- Increase the separation between the equi pment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Specifications:
-
Compliance: Part 15 of FCC Rules
-
Radiation Exposure Limits: FCC approved for uncontrolled environment
-
Minimum Distance: 0cm between radiator and body
-
-
FAQ:
Q: Can I modify the device for better performance?
A: No, any changes or modifications not approved by the manufacturer could void your warranty and affect device operation.
Q: What should I do if the device emits interference?
A: Ensure that the device is placed in an appropriate location and is not in close proximity to other electronic devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>