CARLSBRO EDA80B Drum Amplifier Instructions

June 1, 2024
CARLSBRO

CARLSBRO EDA80B Drum Amplifier

CARLSBRO-EDA80B-Drum-Amplifier-PRODUCT-IMAGE

Product Specifications

  • Compliance: Part 15 of FCC Rules
  • Class: B

Product Usage Instructions

  1. FCC Compliance
    This device complies with part 15 of the FCC Rules. It is important to ensure that the device does not cause harmful interference and accepts any interference received.

  2. Class B Device
    This device is classified as a Class B device, which signifies its specific technical standards and requirements for electromagnetic compatibility.

Frequently Asked Questions (FAQ)

  • Q: What should I do if the device causes interference?
    A: If the device causes interference, try repositioning it or contacting customer support for assistance in resolving the issue.

sec AUDIO Ltd

SPECIFICATIONS

CARLSBRO-EDA80B-Drum-Amplifier- \(10\)

IMPORTANT SAFETY SYMBOLS

  • CARLSBRO-EDA80B-Drum-Amplifier- \(1\)CARLSBRO-EDA80B-Drum-Amplifier- \(1\) The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death.
  • The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety the component specified in that documentation for safety reasons.
  • Protective grounding terminal
  • Alternating current/voltage
  • Hazardous live terminal
    • ON: Denotes the apparatus is turned on.
    • OFF: Denotes the apparatus is turned off.

WARNING: Describes precautions that should be observed to prevent the danger of injury or death to the operator.

  • CAUTION: Describes precautions that should be observed to prevent danger of the apparatus.
  • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

IMPORTANT SAFETY INSTRUCTIONS

  • Read these instructions.

  • Heed all warning.

  • Keep these instructions.

  • Follow all instructions.

  • Water & Moisture
    The apparatus should be protected from moisture and rain, can not used near water, for example: near bathtub, kitchen sink or a swimming pool, etc.

  • Heat
    The apparatus should be located away from the heat source such as radiators, stoves or other appliances that produce heat.

FRONT PANEL

CARLSBRO-EDA80B-Drum-Amplifier- \(8\)

  1. INPUT
    2×1/4″ jack, left and right (stereo). lefUmono (mono).

  2. VOLUME
    Volume level for main input.

  3. LOW
    Low frequency control, centered at 80Hz with 8dB boost, 12 dB cut.

  4. MID
    Mid frequency control, centered at 3.15kHz with 8dB boost, 12 dB cut.

  5. HIGH
    High frequency control, centered at 12kHz with 8dB boost, 12 dB cut.

  6. LINE INPUT 1×1/8 ” stereo jack. Wired auxiliary input for CD/MP3 player. Volume and tone is controlled via your external device.

  7. HEADPHONE 1x 1/8″ stereo jack. Headphones combine all inputs: INPUT, LINE INPUT/ BLUETOOTH. Headphone input will bypass internal speakers. Tailored to 32 Ohm headphones.

  8. BLUETOOTH BUTTON
    Press and hold for 2-3 seconds to share the bluetooth signal (light flashing) Turn on your mobile device’s Bluetooth to search for device name EDA80B, select and pair (light static) Volume and tone is controlled via your mobile device. Press and hold Bluetooth button for 2-3 seconds to turn off bluetooth signal.

  9. POWER LIGHT
    When the power supply is turned on. the indicator light will be blue. If there is no signal input for more than 2 minutes the EDA80B will enter standby mode and the power indicator will turn red. When a signal is detected, the indicator remain blue.

  10. POWER SWITCH
    EDA80B ON/OFF
    Note: Please do not switch on and off repeatedly within a short period of time, to avoid internal damage.

REAR PANEL

CARLSBRO-EDA80B-Drum-Amplifier- \(9\)

Warning:

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Class B device:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation.

  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The distance between user and products should be no less than 20cm.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals