namesake M26742 Brimsley Tambour 3 In 1 Convertible Crib Instruction Manual
- June 1, 2024
- namesake
Table of Contents
namesake M26742 Brimsley Tambour 3 In 1 Convertible Crib
Product Specifications
- Brand: Brimsley
- Model: M26742
- Dimensions: Various, see assembly instructions
- Material: Wood
- Color: Varies
Product Usage Instructions
Getting Started
Before starting the assembly process, ensure you have all the necessary
hardware components mentioned in the manual.
Assembly Instructions
- Follow the step-by-step instructions provided in the manual for assembling the crib.
- Make sure to securely tighten all bolts and fasteners during assembly to ensure stability.
- Check for any damaged parts or sharp edges before and after assembly.
- Do not use the crib if any parts are missing, damaged, or broken.
Safety Instructions
It is crucial to follow the safety guidelines provided to prevent any
accidents or injuries:
- Do not use plastic bags or film as mattress covers to avoid suffocation hazards.
- Avoid using soft bedding, pillows, or comforters in the crib.
- Ensure the mattress used is of the correct size and thickness to prevent gaps that could pose a suffocation risk.
- Avoid placing items with strings near the crib to prevent strangulation hazards.
- Adjust the mattress height and remove potential climbing aids as the child grows to prevent falls.
Maintenance
After assembly, do not substitute parts or use finishes not specified for
children’s products. Regularly check the crib for any loose fasteners or parts
and tighten them as needed.
Frequently Asked Questions (FAQ)
-
Q: What should I do if I find damaged hardware during assembly?
A: Contact Namesake for replacement parts and do not proceed with assembly using damaged hardware. -
Q: Can I use a mattress of any thickness in this crib?
A: No, use a mattress that does not exceed 6 inches in thickness to ensure proper safety standards are met.
Welcome Home
We have carefully designed and crafted each piece of furniture to be with your
family for years to come. Here’s to new memories of bedtime stories, goodnight
kisses, holiday mornings, and baby’s first steps.
From our family to yours, Namesake
GETTING STARTED
As always, for additional questions, please contact us and we’ll be more than
willing to help!
NAMESAKEHOME.COM/SUPPORT
323-909-5019
PARTS
NOT TO SCALE
HARDWARE
ACTUAL SIZE
ASSEMBLY INSTRUCTIONS
Lower the support as your child grows.
WELCOME HOME
WARNING:
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
BEFORE ASSEMBLY
Read all instructions before assembling crib. Keep instructions for future
use. Check this product for damaged hardware, loose joints, loose bolts or
other fasteners, missing parts, or sharp edges before and after assembly and
frequently during use. Securely tighten loose bolts and other fasteners. DO
NOT use crib if any parts are missing, damaged, or broken. For replacement
parts or instruction manuals, contact Namesake.
SUFFOCATION HAZARD
Never use plastic shipping bags or other plastic film as mattress covers
because they can cause suˇocation. Infants can suˇocate in gaps between crib
sides and a mattress that is too small.
WARNING:
Infants can suˇocate on soft bedding. Never add a pillow or comforter. Never
place additional padding under an infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed
on their backs to sleep, unless otherwise advised by your physician.
CAUTION
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8
INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
WARNING:
Use a mattress that is no thicker than °˛ cm and is of such a size that, when
it is pushed firmly against any side of this crib, it does not leave a gap of
more than ˝ cm between the mattress and any part of any other side of the
crib.
STRANGULATION HAZARD
Strings can cause strangulation! Do not place items with a string around a
child’s neck, such as hood strings or pacifier cords. Do not suspend strings
over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of
the body or clothing on loose fasteners. DO NOT place crib near window where
cords from blinds or drapes may strangle a child.
FALL HAZARD
When child is able to pull to a standing position, set mattress to lowest
position. Remove bumper pads, large toys and other objects that could serve as
steps for climbing out.
Stop using crib when child begins to climb out or reaches the height of ˝˛ in.
(˙ˆ cm).
AFTER ASSEMBLY
DO NOT substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Follow warnings on all products in a crib.
TODDLER BED CONVERSION
M19699
Not included, sold separately.
Please contact your retailer or purchase at:
NAMESAKEHOME.COM/SUPPORT
ASSEMBLY INSTRUCTIONS
DAY BED CONVERSION
ASSEMBLY INSTRUCTIONS
WARNING
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE
CRIB MATTRESS AT LEAST 51 5⁄8 IN. (131 CM) IN LENGTH, 27 1⁄4 IN. (69 CM) IN
WIDTH, AND A MAX THICKNESS OF 6 IN. (15 CM).
THE INTENDED USER’S MINIMUM AGE MUST BE AT LEAST 15 MONTHS OLD
AND MAXIMUM WEIGHT MUST NOT EXCEED 50 LBS (22.7 KG).
REGISTRATION
Registering your product is simple.
NAMESAKEHOME.COM/REGISTRATIONS
PART REPLACEMENT
If you would like to order replacement or missing parts, please visit us at,
NAMESAKEHOME.COM/PARTS
or you can contact us by mail at, 8700 REX RD. PICO RI VERA, CA 90660
ONE YEAR LIMITED WARRANTY
Rest assured, your Namesake product is covered under warranty for one year
after the date of purchase. For more details on our warranty policy, please
visit,
NAMESAKEHOME.COM/WARRANTY
CARE AND CLEANING
To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic
cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use
abrasive chemicals or materials. For fabrics, we recommend using a non-toxic
foaming fabric cleaner or leather cleaner where appropriate. Touch up kits are
available for purchase by contacting us at,
323-909-5019 OR
NAMESAKEHOME.COM/PARTS
STORAGE
Because materials respond to temperature and humidity, it is important to
store furniture in controlled environments. Furniture should not be placed in
direct sunlight or near air-conditioning outlets, radiators, heaters, or
humidifiers. Any changes such as extreme heat or cold, dampness, or dryness,
may cause notice-able shrinkage or swelling of wood. Direct sunlight may aˇect
the coloring of materials over time.