namesake B14316 Tanner 6 Drawer Assembled Dresser Instructions
- June 17, 2024
- namesake
Table of Contents
Tanner
B14316
Welcome Home
We have carefully designed and crafted each piece of furniture to be with your
family for years to come.
Here’s to new memories of bedtime stories, goodnight kisses, holiday mornings,
and baby’s first steps.
From our family to yours, Namesake
GETTING
STARTED
As always, for additional questions, please contact us and we’ll be more than willing to help!
NAMESAKEHOME.COM/SUPPORT
323-909-5019
PARTS
NOT TO SCALE
ASSEMBLY
INSTRUCTIONS
OPTIONAL
- Use the optional middle leg for added stability.
- Adjustable screw to help provide stability.
ANTI-TIP KIT
INSTALLATION
HARDWARE
ACTUAL SIZE
Find your wall material and follow steps to attach the anti-tip kit to your
wall.
Drywall or plaster with available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 1/8-inch (3 mm) diameter pilot holes into the wood stud, on the pencil
marks.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the wood.
Drywall without available wood stud:
– Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the
attachment holes with a pencil.
– Drill 3/8-inch (9 mm) diameter holes through the wall, on the pencil marks.
– Drive the plastic anchors into the holes, using a hammer if needed.
– Following the appropriate pictogram instructions on the following pages,
drive two screws through the bracket and tighten screws firmly into the plastic
anchors in the wall. Do not over-tighten. If your wall material is not listed
here, or if you have any questions, consult your local hardware store.
Fasten bracket to back of dresser.
Place second bracket on the wall 1-2” (25-50mm) below the top of the
dresser and mark holes.
Follow the “Find Your Wall Material” instructions on the previous
page.Drill a 3/8″ (9 mm) hole and insert
plastic anchor into hole (If needed).
Fasten second bracket by screwing into plastic anchors or wood stud.
Loop provided 2 ties through both brackets and secure tightly.
WELCOME HOME
- CHANGER TRAY IS NOT INCLUDED, SOLD SEPARATELY.
CHANGER TRAY M0219 OR M0619 IS RECOMMENDED.
READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT.
KEEP THE INSTRUCTIONS FOR FUTURE USE.
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
Recheck all screws and bolts to be sure they are fastened securely.
Do not overtighten.
REGISTRATION
Registering your product is simple.
NAMESAKEHOME.COM/REGISTRATIONS
PART REPLACEMENT
If you would like to order replacement or missing parts, please visit us at,
NAMESAKEHOME.COM/PARTS
or you can contact us by mail at, 8700 REX RD. PICO RIVERA, CA 90660
ONE YEAR LIMITED WARRANTY
Rest assured, your Namesake product is covered under warranty for one year after the date of purchase. For more details on our warranty policy, please visit,
NAMESAKEHOME.COM/WARRANTY
CARE AND CLEANING
To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-toxic foaming fabric cleaner or leather cleaner where appropriate. Touch up kits are available for purchase by contacting us at,
323-909-5019 OR NAMESAKEHOME.COM/PARTS
STORAGE
Because materials respond to temperature and humidity, it is important to store furniture in controlled environments. Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers. Any changes such as extreme heat or cold, dampness, or dryness, may cause notice- able shrinkage or swelling of wood. Direct sunlight may affect the coloring of materials over time.
REVISED 06 SEP 20 23
Documents / Resources
|
namesake B14316 Tanner 6 Drawer Assembled
Dresser
[pdf] Instructions
B14316 Tanner 6 Drawer Assembled Dresser, B14316, Tanner 6 Drawer Assembled
Dresser, 6 Drawer Assembled Dresser, Assembled Dresser, Dresser
---|---