Avia 2BEY2-5055661500470 Secure Smart Deadbolt+ Instruction Manual
- June 1, 2024
- AVIA
Table of Contents
- Avia 2BEY2-5055661500470 Secure Smart Deadbolt+
- Product Information
- Information
- Battery installation/replacement
- App And Lock setup or functionality
- Keypad setup and functionality
- Lock information
- Resetting the lock
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Avia 2BEY2-5055661500470 Secure Smart Deadbolt+
Product Information
Specifications
- Model: Avia Secure Smart Deadbolt+
- Power Source: 4 x AA batteries
- Compatibility: Avia Secure Smart App
- Features: Keypad, NFC keyfob compatibility, custom PIN codes, firmware updates, activity log
FAQ
- How can I troubleshoot connectivity issues with my Avia Secure Smart Deadbolt+?
- If you are experiencing connectivity issues, try reorienting or relocating the receiving antenna, increasing separation between equipment, or consulting a professional for assistance.
- How do I ensure compliance with FCC Certification regulations?
- To comply with FCC regulations, maintain a minimum distance of 20cm between the lock and your body. Follow guidelines for equipment installation and operation provided in the manual.
Information
Lock installation
- Please follow the instructions in the video to install the lock by visiting the link below or scanning the QR Code.
- https://usa.aviasmart.com/shop/deadbolt/installation/
Battery installation/replacement
- Slide up the battery cover on of the motor module.
- Insert 4 new batteries.
- While inserting the batteries, please note the polarities mentioned on the battery holder.
- Now replace the back covering.
App And Lock setup or functionality
App setup and functionality
- Follow the steps mentioned in the battery installation.
- After inserting the batteries, the keypad LEDS will start to flash.
- Open the Avia secure smart app and tap the + button in the right corner of the app to begin the process of adding a new accessory.
- Then select ‘Add Avia Smart Deadbolt+’ (as shown in the image seen right).
Lock setup and functionality
Lock or unlock the lock by tapping the tile or press and hold to open the
details screen.
In the details screen (seen left) you can do the following:
- Edit the name of the lock.
- Monitor the battery percentage.
- In the rooms section, you can select the room where you have fitted the Avia Smart Deadbolt+.
- Add NFC keyfob
- Can add and manage custom PIN codes
- Update the firmware.
- You can view the activity log.
- In the lock setting screen
- Enable or disable auto-lock feature,
- Set lock orientation.
- Enable/disable audio feedback
Keypad setup and functionality
In the Keypad screen (seen left) you can do the following:
- Enable/disable the keypad.
- Set a pin for locking.
- Enable/Disable a keypad wakeup keypress.
- Enable keypad light
- Enable Avia logo light
- Set keypad backlight colour
Lock information
In the Lock information screen (seen left) you can view the following:
- Firmware version
- Model
- Device serial number
- Device reset instruction
- Tap on Send diagnostic log to send the diagnostic log
Lock DFU | Updating the firmware
- Open the Avia app and press and hold the lock tile to access lock details.
- Scroll down to the DFU section and tap “Update Firmware” to start the firmware update process.
Resetting the lock
- Remove the battery cover.
- Using a long, thin object, press and hold the button ‘C’ for at least 10 seconds to reset the device.
FCC STATEMENT
FCC Certification compliance
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the lock.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>