Shenzhen Hanwei Security Technology Co Ltd ER-DB10 Smart Wireless Doorbell User Manual
- June 1, 2024
- Shenzhen Hanwei Security Technology Co Ltd
Table of Contents
Shenzhen Hanwei Security Technology Co Ltd ER-DB10 Smart Wireless
Doorbell
Product Information
Specifications
- Compliance: FCC Part 15
- Radiation Exposure Limits : FCC approved
- Minimum Distance : 0cm between radiator and body
Product Usage Instructions
Safety Precautions
Before using this device, please read the following safety precautions:
- Do not make any changes or modifications to the device not approved by the manufacturer.
- Ensure a minimum distance of 0cm between the radiator of the device and your body during operation.
- Avoid exposure to harmful interference that may affect the operation of the device.
Installation
Follow these steps to install the device:
- Place the device on a stable surface.
- Connect the necessary cables to power up the device.
- Ensure there is no physical obstruction around the device for proper ventilation.
Operation
To operate the device:
- Power on the device using the designated button.
- Follow the user manual for specific functions and settings.
- Monitor the device for any unusual behavior or interference.
FAQ
- Q: Can I modify the device without approval?
- A : No, any changes or modifications not approved by the manufacturer may void your warranty and authority to operate the equipment.
- Q: What should be the minimum distance between the device and my body?
- A : The device should be operated with a minimum distance of 0cm between the radiator and your body as per FCC guidelines.
Operation Guide
Plug the doorbell receiver into the AC outlet, the receiver rings “Dingdong” once and the LED indicator flash, means that the receiver has entered working mode.
Tear off the back glue of the doorbell transmitter and stick it on the wall. Press and hold for more than 5 seconds to release it.
After confirming that the transmitter is firmly fixed, press the transmitter, the receiver will emit a melody means that the transmitter working normally.
This wireless doorbell has a power outage memory function, power off and restart will remember the ringing sound of a bell for the last time.
Setting and adjustment
Add doorbell transmitter)
short press the [Setting] button . The doorbell receiver will beep once and release your hand. Press the button on the transmitter, and the receiver will “Dingdong” once, which means pair successfully.
Note: The product has been pair before leaving factory, and users do not need to operate the configuration.
Enforce clean
pull the doorbell out from the socket, long press the [Volume) button 4) and
plug in the doorbell for 3 seconds. The doorbell receiver will beep once
indicates all the transmitters and detectors were deleted successfully.
After restoring factory settings, all the accessories without songs. At this
time, select the songs you want first. Long press the [Select Song] button for
3 seconds, the doorbell receiver emits a beep to trigger the button to learn.
In this way, the accessory has a music memory function. All the accessory
always maintains the learning songs no matter how the music is switched.
Technical Parameters
- Working Voltage: AC 100-240V
- Working Current: < 100mA
- Wireless Frequency: 433MHz
- Working Temperature: -10°C- -50°C
- Wireless Distance: 100meters (Open area)
- Receiver Size: 974817mm (Not include plug )
- Volume Decibels: 20-100db (4 levels adjustable volume)
- Working Voltage: 3V (CR2032 button battery )
- Working Current: 8mA
- Wireless Frequency : 433MHz
- Working Temperature: -10°C— -50°C
- Transmitting Distance : 100meters (Open area)
- Transmitter Size : 794011mm
Package List
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, maycause harmful interference to radio communications. However, thereis no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>