Kinrinjinlin B0C6DTJ97G Foldable Hinged Frameless Glass Door Instruction Manual

Kinrinjinlin B0C6DTJ97G Foldable Hinged Frameless Glass Door

Product Specifications

• Size/Dimensions: 1092mm x 1077mm x 1092mm (43″ x 42.4″ x 43″)
• Material Thickness: 0.24″ (6mm) and 0.13″ (3.2mm)
• Components Included: [1] x3, [2] x1, [3] x3 (ST4x8), [4] x3 (ST4x30), [5] x3, [6] x2, [7] x2, [8] x1, [9] x1, [10] x1, [11] x1, [12] x1

Product Usage Instructions

Installation Instructions

1. Refer to the assembly diagram provided in the manual to identify all components.
2. Begin by assembling components [1], [2], and [3] using screws [3] (ST4x8).
3. Continue assembling the remaining components according to the sequence outlined in the manual.
4. Ensure all screws are securely tightened to avoid instability.

Care and Maintenance

Regularly clean the product with a mild detergent and soft cloth to maintain its appearance. Avoid using abrasive cleaners that may damage the surface.

Frequently Asked Questions

Q: How do I adjust the product dimensions?

A: To adjust the dimensions, follow steps 1a, 1b, and 1c in the assembly instructions to customize the size within the specified range.

Q: What should I do if a component is missing?

A: If any component is missing, please contact customer support for assistance in obtaining the required part.

Q: Can I disassemble the product for relocation?

A: Yes, you can disassemble the product by following the reverse steps of the assembly instructions. Ensure to keep all components safely for reassembly.

CARE AND MAINTENANCE

After use, your shower should be cleaned with soap and water. This is

particularly important in hard water districts where insoluble lime salts may be deposited and allowed to build up. Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact with strong chemicals such as organic solvents and strippers. Class cleaners can be used but with caution, if in doubt contact the manufacturer of the cleaner in question. Please keep these instructions for aftercare and customer service details.

SAFETY INFORMATION

Please inspect the product immediately upon receipt for transit damage, missing packs/parts or manufacturing fault. Damage reported later cannot be accepted. Please handle the product with care avoiding knocks and shock loading to all sides and edges of the glass

NOTICE: Safety glass can not be re-worked/REMARQUES : Les vitres ne peuvent pas être retravaillées Please read these instructions carefully before starting the installation. Special care should be taken when drilling walls to avoid hidden pipes or electrical cables. Note: This product is heavy and may require two people to install

CAUTION
Please do not remove the plastic corner protectors before the shower door has been installed properly.

TOLLS

PARTS

INSTALLATION

Do not use the shower enclosure for at least 24 hours in order to allow the silicone sealant to cure fully

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>