Unnamed X17 Frameless Shower Door Pivot Swing Tub Instruction Manual
- June 1, 2024
- Unnamed
Table of Contents
Unnamed X17 Frameless Shower Door Pivot Swing Tub
Product Information
Product Specifications:
- Model: X17/A18
- Size: 51.2 inches (1300mm)
- Thickness: 0.24 inches (6mm)
- Weight: Not specified
Product Usage Instructions
-
Assembly:
Follow the provided installation instructions to assemble the components in the correct order as indicated in the manual. -
Care and Maintenance:
Regularly clean the product using a damp cloth and mild detergent. Avoid using harsh chemicals that may damage the surface. -
Mounting:
Ensure the product is mounted securely according to the specified minimum and maximum size dimensions to prevent any accidents. -
Fastening:
Use the provided screws (ST4x8, ST4x35) to fasten the components securely in place. Follow the recommended tightening torque for each screw size. -
Attention to Detail:
Pay attention to the orientation of each component during assembly to ensure proper alignment and functionality.
Frequently Asked Questions
Q: How do I clean the product?
A: Use a damp cloth with mild detergent for regular cleaning. Avoid harsh chemicals.
Q: What is the recommended tightening torque for the screws?
A: Refer to the installation manual for specific recommendations on tightening torque for each screw size.
Q: Can I disassemble the product for storage?
A: While disassembly is possible, it is recommended to follow the assembly instructions in reverse order to avoid any damage to the components.
CARE AND MAINTENANCE
After use, your shower should be cleaned with soap and water. This is particularly important in hard water districts where insoluble lime salts may be deposited and allowed to build up. Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact with strong chemicals such as organic solvents and strippers. Class cleaners can be used but with caution, if in doubt contact the manufacturer of the cleaner in question. Please keep these instructions for aftercare and customer service details.
SAFETY INFORMATION
Please inspect the product immediately upon receipt for transit damage, missing packs/parts, or manufacturing faults. Damage reported later cannot be accepted. Please handle the product with care avoiding knocks and shock loading to all sides and edges of the glass.
NOTICE: Safety glass can not be re-worked.
Please read these instructions carefully before starting the installation. Special care should be taken when drilling walls to avoid hidden pipes or electrical cables. Note: This product is heavy and may require two people to install.
CAUTION
Please do not remove the plastic corner protectors before the shower door has
been installed properly.
What’s In The Box
Parts List
Installation Instruction
