hama 00125115 Active Stylus Instruction Manual

hama 00125115 Active Stylus

INSTALLATION

Controls and displays

1. USB-C charging socket
2. On/Off button
3. Status LED

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass this operating instruction on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

• Active “Scribble” input stylus
• USB-C cable
• These operating instructions

Safety instructions

• The product is intended for private, noncommercial use only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Protect the product from dirt, moisture and overheating and use it in dry rooms only.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not drop the product and do not expose it to any major shocks.
• The battery is integrated and cannot be removed. Dispose of the product in accordance with legal regulations.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not operate the product outside the power limits given in the specifications.
• Do not continue to operate the product if it is visibly damaged.
• Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.
• Do not modify the device in any way. Doing so voids the warranty.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Start-up and operation

Note
Use only original accessories (or accessories approved by Hama) to avoid damage to the product.

Warning – magnet

• Keep bank cards or similar cards with magnetic strips away from the magnet. The data on the cards’ magnetic strip could be damaged or completely deleted.
• People with pacemakers should keep away from magnets. The magnet can negatively affect the function of the pacemaker

Charging the battery

Warning – rechargeable battery

• Only use suitable charging devices or USB ports for charging.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
• When stored over a long period of time, batteries should be charged regularly (at least every three months).
• The product contains a rechargeable battery.
• Fully charge the product once before using it for the first time.
• Connect the supplied USB charging cable to the USB connection (2) on the product.
• Connect the free plug on the USB charging cable to a suitable USB charger.
• To do this, consult the operating instructions for the USB charger you are using.
• The status LED (3) lights up solid red during the charging process. Once the battery is fully charged, the status LED (3) lights up green.

Note – charging process/battery capacity

• A complete charging cycle takes about 90 minutes.
• The input stylus’s rechargeable battery can be charged both when it is switched on and off.
• If the battery capacity is less than 10%, the status LED (3) flashes slowly blue and after around 10 seconds switches itself off automatically.
• The actual battery life will vary depending on how you use the device, the settings and the environmental conditions (batteries have a limited life).

Note – Automatic switch-off

• Please note that the input stylus will switch itself off after 5 minutes of inactivity.

Note
To avoid damage to the display, please note the following points:

• Avoid exerting excessive pressure on the display with the input stylus.
• Ensure that the display and input stylus are clean before use. Small pieces of dirt such as grains of sand can cause scratches when the input stylus is being used.
• Press the On/Off switch (3) to switch the input stylus on. The status LED (3) lights up solid blue.
• Press the On/Off switch (3) to switch the input stylus off. The status LED (3) goes out.

Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

| Active “Pro” input stylus
---|---
Power supply| 5V / 1A
Current consumption| 5 V 120 mA
Battery type| Li-Po
Min. capacity| 130 mAh / 0.48 Wh
Typ. capacity| 140 mAh / 0.52 Wh
Weight| 14g
Dimensions L x Ø| 165 x 9 mm
System requirement – Scribble function| – iPad OS14 or later

– Language support

Hama GmbH & Co KG
86652 Monheim/Germany
Service & Support
www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>