Wuyi Jinheng Household goods Co Ltd QB03 Velcro Installation Guide

Wuyi Jinheng Household Goods Co Ltd QB03 Velcro

Product Usage Instructions

1. Power On/Off:
   To power on the device, press and hold the power button for 3 seconds. To power off, repeat the same steps.

2. Setting Up:
   Place the product on a flat, stable surface and ensure proper ventilation around the device.

3. Maintenance:
   Regularly clean the product using a damp cloth. Avoid using harsh chemicals that may damage the material.

Frequently Asked Questions

• Q: How do I change the settings on the product?
  A: To change settings, navigate to the menu using the control panel and follow the on-screen instructions.

• Q: What should I do if the product stops working suddenly?
  A: Check the power source and connections. If the issue persists, contact customer support for further assistance.

• Q: Is the product waterproof?
  A: No, this product is not waterproof. Keep it away from water to prevent damage.

Installation Method

1. Attach the short strip to the back of the machine
2. Stick the strip to the wall
3. Stick the back at the right height
4. The installation is complete

Velcro mounting
The installation is simple, tear off the sticker, and install it directly, saving time and effort Support one-key Bluetooth, a taster connection, so You can play your favorite music as much as you like.

Using Instruction

• Bluetooth connection:
  Press and hold the “on/off” button for 3 seconds to turn it on or off, then click the power button after turning on the device Switch to Bluetooth mode, then turn on Bluetooth on your phone and you can find The Bluetooth of the boxing ring. If you don’t want Bluetooth mode, click to switch

• Volume adjustment:
  There are a total of 5 volume levels, which can be adjusted by clicking the “VOLUME” button Volume level if you feel the sound is loud, you can quickly click to switch Sound Size

• Speed adjustment:
  Click the “SPEED” button to adjust the speed, for a total of 9 gear speeds The higher the gear, the faster the corresponding hitting speed, which helps to improve reaction ability.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>