Plaff-on 50 LED Joan Gaspar Marset Instruction Manual
- June 3, 2024
- Plaff-on
Table of Contents
Plaff-on 50 LED Joan Gaspar Marset
WARNING
- It is recommended that a professional electrician be responsible for installing the light.
- Disconnect power supply before installation.
- If the wire or flexible cord is damaged,it must only be changed by the manufacturer, their Service Dept. or qualified personnel in order to avoid risk.
- Use a soft damp cloth, with soap or neutral detergent. Do not use alcohol or other solvents.
Assembly Instructions
- Punch holes into part (A) to pass the wires through.
- Fix wall lamp (B) in position using the plugs and screws (C) provided.
- Connect the wiring in the junction box (D).
- Fix unit (E) using the nuts (F) provided.
- Screw the glass (G) until it is tight
Technical Data
- Light fitting for outdoor use.
- Power Factor : 1
- Bulb to be used :
- LED SMD 31W (included)
Basic insulation plus second insulation or both replaced by reinforced
insulation. Earthing: excluded.
This symbol on the product or its packaging indicates that it must not be
treated as household waste.
It should, in fact, be handed in at a recognised collection point for
recycling electrical and electronic equipment. For more detailed information
about the recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the
product.
Dimmable
- Phase cut dimmer trailing edge.
- 230 V ~ 50 Hz
· SPAIN · WWW.MARSET.COM REV. 00
Documents / Resources
|
Plaff-on 50 LED Joan Gaspar
Marset
[pdf] Instruction Manual
50 LED Joan Gaspar Marset, 50 LED Marset, Joan Gaspar Marset, Gaspar Marset,
Joan Gaspar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>