behringer EUROLIVE B115MP3, B112MP3 Active 2 Way PA Speaker System User Guide

: August 9, 2024
: Behringer

Table of Contents

Behringer EUROLIVE B115MP3, B112MP3 Active 2 Way PA Speaker System
Specifications
Product Usage Instructions
Important Safety Instructions
EUROLIVE B115MP3/B112MP3 Hook-up
Controls
EUROLIVE B115MP3/B112MP3 Getting started
Other important information
LIMITED WARRANTY
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Behringer EUROLIVE B115MP3, B112MP3 Active 2 Way PA Speaker System

Specifications

Amplifier

Product Usage Instructions

Safety Instructions
It is crucial to follow these safety instructions to prevent any risks or damage to the product:

Do not remove top cover or rear section.
Avoid exposure to rain or moisture.
Do not attempt any servicing, refer to qualified personnel.
Avoid water contact and clean with a dry cloth only.
Ensure proper ventilation and avoid blocking openings.

Setup and Installation
Follow these steps to set up your EUROLIVE B115MP3/B112MP3:

Place the speakers in the desired location, ensuring proper ventilation.
Connect power cord to a mains socket with protective earthing connection.
If using a cart or stand, ensure stability to prevent tip-over accidents.
Connect audio sources using appropriate cables to the integrated mixer.

Operation Instructions
To operate the speaker system effectively:

Power on the speakers and adjust volume levels accordingly.
Use the integrated mixer to control audio inputs and settings.
Utilize the MP3 player and wireless options for versatile audio playback.

Important Safety Instructions

behringer Speaker System MP3 Player Wireless Option Integrated
logo2 ****Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute risk of electric shock.
Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.

****This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of fire or electric shock do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. Music Tribe Global Brands Ltd. 2021 All rights reserved.

EUROLIVE B115MP3/B112MP3 Hook-up

Hook-Up

Controls

The POWER switch turns the speaker on.
Plug the included IEC power cable into this jack.
Replace a blown fuse here.
MIX OUTPUT sends a copy of the source signal to another speaker using an XLR cable.
Connect a microphone, balanced mixer output, or the MIX OUTPUT from another speaker using a balanced cable with a female XLR plug. Connect a 1/4″ mixer output or another line-level signal into the center of the XLR/TRS combination jack.
INPUT 1 and INPUT 2 knobs adjust the input sensitivity (gain) for the XLR/TRS combination jacks.
CLIP LED lights when the input signal begins to overload.
LOW EQUALIZER cuts or boosts bass frequencies by +/- 15 dB.
HIGH EQUALIZER cuts or boosts treble frequencies by +/- 15 dB.
CLIP LED lights when the main output signal begins to overload.
Connect optional Behringer wireless microphone receiver here.
LEDs indicate wireless microphone signal input.
MP3 player controls for playback of files from a USB flash drive.
The LEVEL knob controls the MP3 player volume.
LCD window display shows the status of the MP3 being played.
USB jack accepts standard USB flash drives.
MODE and DISP(LAY) buttons control the play mode of the MP3 player and also serve as contrast controls for the LCD display.

EUROLIVE B115MP3/B112MP3 Getting started

Getting started

Place the speaker(s) in desired locations, either on stands or as wedge monitors on the floor.
Make all necessary connections. DO NOT turn on the power yet.
Turn on your audio source (mixer, microphone).
Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
Play your audio source or speak into your microphone at a normal to a loud level.
Adjust the LEVEL knob to the desired volume. If the CLIP LED flashes, turn the LEVEL knob down. If using multiple speakers, the LEVEL knob must be adjusted on each speaker.
If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to boost or cut treble and bass frequencies to taste.
Attach a USB flash drive to the USB port. Switch between folders on the drive using the FOLDER buttons. Select the track you wish to play using the TRACK buttons. Press the PLAY/PAUSE button to start or stop playback.
Press the REPEAT button and then the MODE button to select between repeating: ALL mp3 files on the USB drive, files in the current FOLDER, the currently playing file (SINGLE) or to play all files in
RANDOM order.
Press the DISP(LAY) button to change what appears on the screen of the MP3 player between the TAG (artist and song name information), TRACK (file name up to 64 characters) or TIME (shows track number in the current folder and the elapsed time of the currently running track).
Press the DISP(LAY) and MODE buttons at the same time to cycle between screen contrast intensities.
Adjust the playback volume using the LEVEL knob.

Optional wireless microphone setup

Only insert the optional Behringer DIGITAL WIRELESS microphone receiver into the input.
Turn the ON/OFF switches on the microphones to the “ON” position.
During the pairing process, the LED on the dongle will flash. Once the connection between the wireless microphone and the receiver is achieved, the LED will remain on (solid).
Speak into the wireless microphones and adjust the volume using the volume buttons on the individual microphones. Press the volume down button for two seconds to mute the microphone signal. Press the volume up button to unmute the microphone.

Other important information

Important information

Register online
Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. Other important information
Malfunction
Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should our country not be listed, please check if your problem can be dealt with by our “Online Support” which
may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
Power Connections
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type
and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

EUROLIVE B115MP3/B112MP3

EUROLIVE B115MP3/B112MP3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product complies with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU, and Amendment 2015/863/ EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative : Music Tribe Brands DK A/S
Address : Gammel Strand 44, DK-1202 København K, Denmark
UK Representative : Music Tribe Brands UK Ltd.
Address : 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Frequently Asked Questions

Q: Can I use the speakers outdoors?
A: It is not recommended to expose the speakers to rain or moisture. Use them in indoor environments to prevent damage.

Q: How do I clean the speakers?
A: Use a dry cloth to gently wipe the exterior of the speakers. Avoid using any liquids or cleaning agents.

Q: Can I connect instruments directly to the speakers?
A: It is advisable to connect instruments to a mixer or audio interface before routing them to the speakers for optimal sound quality and control.