SEALEY LED0131R LED Rechargeable Inspection Light Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY LED0131R LED Rechargeable Inspection Light
Specifications
- Model No: LED0131R
- Battery: 3.7V 2200mAh Lithium-ion
- Charging Time: 7 hours
- LED Type: 5W LED + 5W COB + 10W SMD
- Lumen Output: 450lm (Flexi-headlight: 300lm, Torch: 1000lm)
- IP Rating: IPX4
- Operating Time: Flexi-headlight: 11hrs, COB: 4.2hrs, Torch: 3.3hrs
Product Usage Instructions
Safety Instructions
It is crucial to adhere to the safety guidelines to ensure proper and safe
operation of the product.
- Inspect the cable and connector for wear and damage before connecting to the power supply.
- Ensure the lamp is fully charged before initial use.
- Avoid charging in damp conditions and do not turn on the lamp while it is being charged.
- Avoid shining the light directly into eyes and keep away from children.
- Do not handle or move the lamp while it is being charged.
- If battery or lamp casing is suspected to be damaged, refrain from using the lamp.
- Regularly recharge the battery to prevent leaving it in a discharged state.
- Do not attempt to open, disassemble, modify, or service the battery pack.
- Properly dispose of used batteries as per local regulations.
Introduction
The product is an innovative 3-in-1 worklight that offers versatility and
convenience for various lighting needs. It features a power indicator, and
magnet for hands-free operation, and comes with a high-quality micro USB
cable.
Operation
The product features different lighting modes with varying lumen outputs.
Users can easily switch between the torch, worklight, and flexi-headlight as
needed for different tasks.
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
- Refer to instructions
SAFETY
ELECTRICAL SAFETY
- Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or damaged DO NOT use.
- Ensure the lamp is fully charged before initial use.
- DO NOT charge in damp conditions.
- DO NOT turn the lamp on when it is being charged.
- DO NOT shine directly into your, another person’s or an animal’s eyes.
- DO NOT allow children to use the lamp.
- DO NOT handle or move the lamp whilst it is being charged.
- DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged.
- DO NOT leave the battery in a discharged state, recharge the battery immediately. Before storage, fully recharge the battery, and subsequently recharge the battery at least once every six months of non-use.
- DO NOT attempt to open, disassemble, modify or service the battery pack.
- DO NOT crush, puncture, short external contacts or dispose of in fire or water.
- DO NOT expose to temperatures above 60°C (140°F).
- Replace only with the battery pack designated for this product.
- Recycle or dispose of used batteries as stipulated by local regulations.
- If the electrolyte in the cells gets on your skin, thoroughly wash it with soap and water. If it gets in your eyes, rinse thoroughly with cool water and seek immediate medical attention.
IMPORTANT WARRANTY INFORMATION
- The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
- We will provide a warranty against mechanical and electrical defects for one year – this does not cover fair wear and tear. If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish.
- Under these circumstances, we will not replace the battery regardless of whether the battery is less than one year old.
INTRODUCTION
Innovative 3-in-1 worklight. The threaded interface enables the user to change between a 1000-lumen torch with sliding focus, a 450-lumen worklight and a 300-lumen flexi-head. Features a power indicator on the switch and a magnet on the base for hands-free operation. Supplied in a presentation box with a high- quality micro USB cable.
SPECIFICATION
- Model No: LED0131R
- Battery: 3.7V 2200mAh Lithium-ion
- Charging Time: 7hrs
- LED Type: 5W LED + 5W COB + 10W SMD
- Lumen Output COB: 450lm, Flexi-head light: 300lm. Torch:1000lm
- IP Rating IPX4
- Operating Time (High): Flexi-headlight: 11hrs COB:4.2hrs. Torch 3.3hr
OPERATION
- The LED0131R has been fitted with a protective disc to protect the battery from switching the light on when in transportation. Remove the protective disc before operation by undoing the battery compartment screw cap, remove the protective disc. Screw the compartment screw cap back up.
- CHARGING
- Insert USB cable into mains plug (Not supplied) and plug into mains supply.
- Remove the USB socket cover on the side of the main body of the torch.
- Connect the USB lead to the port on the side of the main body and a USB power socket. Turn on the power supply.
- Switch off the power supply, remove the charging lead and replace the socket cover.
OPERATION
- TORCH
- Attach the torch head by screwing it onto the main body.
- To turn on press the on/off button, once for brightest, again for low light and once more to turn off.
- The torch has a sliding focus.
- To remove the torch head unscrew it from the main body.
- The torch has a magnetic base for hands-free use.
INSPECTION LAMP
- Attach the inspection lamp head by screwing it onto the main body.
- The inspection lamp can be tilted through 180°.
- To turn on press the on/off button once for low light, twice for brightest and once more for off.
- Press on/off to turn off.
FLEXIBLE INSPECTION LAMP
- Press on/off to turn on and off.
- The flexible inspection lamp has an adjustable focus and a 350mm flexible neck for use in areas where access is limited. 4.4. BATTERY INSTALLATION/REMOVAL
- Unscrew the end cap on the main body of the torch.(fig.1)
- Slide the battery into/out of the body of the torch.
- Screw the end cap back onto the torch body.
MAINTENANCE
- Keep the lamp clean and check for damage before every use. If damage is observed, remove it from use until the unit is repaired.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
BATTERY REMOVAL
See section 4.3. Batteries should be disposed of in an environmentally
protective way. Under the Waste Batteries and Accumulators Regulations 2009,
Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are
registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s
Batteries Producer Registration Number (BPRN) is BPRN00705.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling
information.
- NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
- IMPORTAN T: No Liability is accepted for incorrect use of this product.
- WARRANTY: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757500
- sales@sealey.co.uk
- www.sealey.co.uk
© Jack Sealey Limited
FAQ
Frequently Asked Questions
- Q: What should I do if the battery doesn’t hold a charge well?
- A: If you notice reduced battery capacity, ensure proper charging before first use and regular conditioning to maintain battery performance. If issues persist, contact customer support for assistance.
- Q: Can I use the lamp while it’s being charged?
- A: No, it is recommended not to use the lamp while it’s being charged to avoid potential safety hazards and damage to the product.