EDAM I-KE-V3 Official Light Stick User Manual
- June 1, 2024
- EDAM
Table of Contents
EDAM I-KE-V3 Official Light Stick
Product Information
Specifications
- Model: FSUJGJDBUJPO
- Antenna(s): Included
- RF Exposure: Compliant with general RF exposure requirements
- Usage Condition: Portable
Product Usage Instructions
Installation
- Ensure the device is placed in a well-ventilated area.
- Connect the antenna(s) securely to the device.
- Power on the device using the designated power button.
Operation
- Avoid co-locating the device and its antenna(s) with any other antenna or transmitter.
- Ensure the device is used in a portable exposure condition as evaluated for RF exposure.
- Follow any specific usage guidelines provided in the user manual for optimal performance.
FAQ (Frequently Asked Questions)
-
Q: Can I use this device near other antennas or transmitters?
A: No, it is recommended not to co-locate this device and its antenna(s) with any other antenna or transmitter for proper operation. -
Q: Is the device compliant with RF exposure requirements?
A: Yes, the device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.
Specification
- Product : IU OFFICIAL LIGHT STICK I-KE
- Size : 83 x 83 x 229 (mm)
- Weight : About 167g
- Materials : ABS, PC, STEEL
- Components : Light stick, Strap, User manual
- Battery : AAA BATTERY 3EA
- Operating : About 4Hours
- Certification Model : I-KE-V3
- KC : KG R-R-BTr-I-KE-V3
- FCC ID : 2AS3Z-I-KE-V3
- Planning : EDAM ENTERTAINMENT
- Manufacture : BEATRO Co.,Ltd.
- Country of manufacture : KOREA
Caution
- If a strong or exposure to water will cause damage.
- Do not disassemble or assemble on your own.
- Please use a genuine alkaline AAA batteries.
- Please remove the batteries when not in use.
- Keep batteries in a safe place, out of children reach.
- Do segregate your product and used batteries from household waste for recycling, where possible, according to local laws.
- Insert batteries correctly, following the symbols for positioning the positive (+) and negative (-) ends of each battery. If not, it may cause product malfunction and overheating which may result fire or burns.
- There’s a possibility of radio frequency interference during wireless operation.
How to use
MODE
-
POWER ON/OFF (Button Long Click)
Press and hold the button for about 3 seconds to turn the power on/off. -
Normal Mode (Button One Click)
When the power is on, pressing the button briefly changes the 8 color modes. -
Application Mode (Button Double Click)
Double-click the button to switch to Application mode (blue blinking), and double click the button again to return to color change mode.
The Application mode does not operate the color change and is not defective.) In application mode, you can enjoy various productions at the concert by linking the light stick. In the future, you can use the application to enjoy concerts and various contents with the light stick.
Replacing Batteries
If the battery is low voltage, the power is automatically power off, so please replace it with a new battery.
BATTERY CAUTION
- Add the correct order from (-) to (+) pole. There is a risk of ruptures and leaks due to heat in reverse injection.
- Remove the battery part immediately when the battery part suddenly heats up. (Don’t hold it with your hands as there is a risk of burns.)
- Please use genuine alkaline AAA batteries. (If not genuine, there may be damage to the product. Be sure to use a genuine battery.)
- Do not charge, disassemble, short circuit, heat. Risk of injury due to explosion or leakage.
- Remove the battery from the machine immediately after use as it may cause leakage.
- Please use a new battery for each performance.
- Do not mix new batteries with used batteries and other batteries.
- Do not store batteries in a pocket or bag with the battery unpackaged.
Warranty Period and Repair Service
-
Any defect, replacement, or refund of the product, please contact your dealer.
-
Free warranty period is 6 months from the date of purchase. Even within the free warranty period, if the defects of the product occurred by the customer’s fault, repair cost will be charged.
-
The product A/S application fee (round trip shipping fee) shall be paid by the customer if it is subject to paid repair after the manufacturer pays.
-
Repair service is only provided after requesting the service through an email. – Please send the product after application and consultation is completed.
-
Replacement Service: If the following phenomenon occurs within the warranty period (6 months), the product exchange service can be provided, but the product A/S application fee (round trip shipping fee) will be paid by the manufacturer. If it’s subject to paid repair, it’s a customer’s burden.
-
Free A/S – Defects of operation of LED and Wireless.
- Malfunction of the power button. – Bad battery socket.
- Package damage isn’t eligible for a refund or replacement.
Paid Repair Service: The paid warranty period is up to 1 year after purchase. In case of products that are not covered by free warranty, you can get warranty at a cost, and the product A/S application fee (round trip shipping fee) is borne by the customer.
Paid A/S
- After the free warranty. (6 months after the date of purchase)
- Damages on the product or the circuit caused by customer’s fault.
- Disassemble the product for any modification.
- Damages on the circuit by using non-certified battery.
- Damage to circuits and internal flooding due to inundation or rain.
Customer Service Center
Product inquiry and customer service
- TEL : +82) 2-783-1945
- WEB : www.beatro.co.kr / beatroas@beatro.co.kr
- Warranty : 6 months from date of Purchase
How to get customer service
In case of proper use, we will inform how to repair or replace the product
after customer consultation via phone call or email. In case of improper use
due to customer’s fault, we will inform repair cost including logistic cost
for customer service.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.