HOS MED VS6.0i Vital Signs Monitor User Manual
- June 13, 2024
- HOS MED
Table of Contents
HOS MED VS6.0i Vital Signs Monitor
Product Information
The HMD-VS6.0i is a vital signs monitor specifically designed for outpatient clinical and spot checking purposes. It provides faster and simpler measurements of basic patient vital signals. The device features a simple and smart NIBP (non-invasive blood pressure) measurement function, as well as an infrared ear temperature measurement meter. The lithium battery of the temperature meter supports 12 hours of working time, and the digital screen provides a clear view.
The HMD-VS6.0i combines aesthetics design and advanced technology, making it a reliable and efficient device for healthcare professionals.
Key Features:
- 50 groups of NIBP data storage for easy review
- Rapid NIBP measurement technology that shortens measuring time to 20-30 seconds
- Optional Masimo SpO2 and Nellcor SpO2 for oxygen saturation monitoring
- Short startup time of 1-2 seconds to go into normal operation interface
- 6-inch LED backlit LCD display for clear and distinct view
- Infrared ear temperature meter with non-contact measurement mode for quick, stable, and accurate readings in 2-3 seconds
- Provided PR (pulse rate) from SpO2 or NIBP measurements
- NIBP ON/OFF button for easy control
- High performance and accuracy
- Quick and easy to use
- Smart, lightweight, sturdy, and durable design
- Prevents damage by liquid
- Suitable for adult, child, and neonate patients
Product Usage Instructions
To use the HMD-VS6.0i vital signs monitor, follow these instructions:
- Ensure that the device is properly charged or connected to a power source.
- Press the power button to turn on the device.
- Wait for the device to start up, which should take approximately 1-2 seconds.
- The LED backlit LCD display will show the normal operation interface.
- If necessary, select the desired SpO2 option (Masimo or Nellcor) using the provided buttons.
- For NIBP measurement, place the cuff on the patient’s arm and press the NIBP ON/OFF button to start the measurement.
- Wait for the device to complete the NIBP measurement, which should take 20-30 seconds.
- The NIBP data will be stored and can be easily reviewed later.
- For ear temperature measurement, ensure that the infrared ear temperature meter is clean and free from obstructions.
- Hold the temperature meter close to the patient’s ear, but without touching it.
- Press the measurement button on the temperature meter to initiate the measurement.
- Wait for 2-3 seconds for the measurement to complete and for the temperature reading to be displayed on the digital screen.
- Record or take note of the measured vital signs, including blood pressure, pulse rate, oxygen saturation, and temperature.
- When finished, turn off the device by pressing the power button.
Always refer to the user manual for detailed instructions and safety precautions.
INSTALLATION
VS6.0i is especially designed for outpatient clinical and spot checking, it can give a faster and simpler measurement to basic patient vital signals. VS6.0i configures simple and smart NIBP measurement function, as well as the infrared Ear temperature measurement meter whose lithium battery of the TEMP meter supports 12 hours working time and digital screen is clear to view. VS6.0i combines with simple, smart, aesthetics design and technique together.
- 50 groups of NIBP data storage, easy to review
- Reset and recall data button Rapid NIBP measurement technology,it shorten the measuring time to 20~30 seconds from former 60~120 seconds, provides PR figure display
- Optional Masimo SpO2 and Nellcor SpO2, directly display PI figure from Masimo SpO2
- Short time to start up, it just takes 1~2 seconds to go into normal operation interface
- Reset and recall data button
- 6 inch LED back-light LCD display provides a clear and distinct view
- The infrared Ear temperature meter, non-contact measurement mode avoids cross infection, 2~3 seconds measurements time, more quick,stable and accurate
- Provided PR from SpO2 or NIBP measrement
- NIBP ON/OFF button
- Patient type switch button
High performance
Quick and easy to use, accurate measurement
- Using contactless pyroelectric infrared technology to get the ear temperature, the measurement time is only needed 2 to 3 seconds; effectively prevents the risk of cross infection
- Built-in Bluetooth module for TEMP function, patient’s temperature data is quickly transferred to VS6.0i by Bluetooth as well as the figure is displayed on screen, convenient to measure different patient, it shorten the time and cuts the clinical application cost
- Rapid NIBP measurement technology, it shorten the measuring time to 20~30 seconds from former 60~120 seconds, provides PR figure display
- Quickly switches the relative parameters for different type of patient such as adult, child and neonate
- Optional Masimo SpO2 with PI(perfusion index) figure display,PI provides caregiver with an indication of the reliability of SpO2 measurement
Smart and lightweight, sturdy and durable
- 6 inch LED back-light LCD display provides a clear and distinct view
- The net weight is 1.25kg, small enough and light enough to ward round monitoring
- Wall mount and trolley movement solutions
- Precision and hermitic design, it is able to with stand 1.2 meters’ drop test
- Liquid protection grade gets to IPX1, effectively prevents the damage by liquid
To meet clinical need, excellent vital signs monitor
- 50 groups of NIBP data storage, easy to review
- Super li-on battery provides more than 12 hours of cautious monitoring
- Various accessories of NIBP and SpO2 meet the need of different patients including adult, child and neonate
© 2020 by Hosmed Inc or it’s affiliates. All rights reserved. HMD-VS6.0i. Rev 01
3403 NW 82nd Avenue. Suite #102.
Doral, Florida 33122. USA