SHARP ME432 MultiSync Dismantle Instruction Manual
- June 1, 2024
- Sharp
Table of Contents
SHARP ME432 MultiSync Dismantle
Specifications
- Model: PN-ME432, PN-ME502, PN-ME552, PN-ME652
- Power Source: AAA battery for remote control
Scope
This document describes dismantling instruction according to Annex VII of
Directive 2012/19/EU.
Tools for dismantling
- Screw Driver
- Nipper
Dismantle Procedure
This product can be dismantled by below steps.
- Remove Back covers (section 5)
- Remove Printed circuit boards (section 6)
- Dismantle LCD (section 7)
- Remove Electrolyte Capacitors (section 8)
Batteries
This model uses only AAA batteries for remote control. The battery can
easily be removed.
Back covers
cover can be removed by screw driver.
- PN-ME432
- PN-ME502
- PN-ME552
- PN-ME652
- PN-ME652
PWB and other electronic components
All electronic components can be removed by screwdriver.
-
MAIN PWB
-
POWER PWB
PN-ME432 / PM-ME502 / PN-ME552 PN-ME652 -
T-CON PWB
**
**
- KEY PWB
- IR PWB
- WIFI CTL PWB
- Speaker
LCD Module bezels
- PN-ME432/PN-ME502/PN-ME552
- PN-ME652
Parts List
The spare parts listed in the column “Spare Parts” below are kept available in accordance to legal requirements of EU Regulation 2019/2021 for professional repairer.
| Spare Part | Part Name/ Element of Part |
|---|---|
| a. Internal power board | Power PWB |
| b. Connectors to connect external equipment | Main PWB |
| c. Batteries and Accumulators | not applicable |
| d. DVD/Blue-Ray module | not applicable |
| e. HD/SSD module | not applicable |
FAQs
- Q: Is dismantling the product covered under warranty?
- A: Dismantling the product may void the warranty. It is recommended to check the warranty terms before dismantling.
- Q: Can I reassemble the product after dismantling?
- A: Reassembling the product should be done carefully following the reverse steps of dismantling. It is advisable to seek professional help if unsure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>