Piccolo CRL-11501/2 Plus CRL-9201 Buy Playpen Prices Instruction Manual
- June 1, 2024
- Piccolo
Table of Contents
Piccolo CRL-11501/2 Plus CRL-9201 Buy Playpen Prices
Instruction Manual
- Do not suspend strings or toys over the travel cot.
- Never leave your child unattended.
- Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot;
- Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer;
- Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g., strings, blind/curtain cords, etc;
- When used as a Playpen, never use it without the base
- The travel cot shall be kept away from cords and flexes.
- Do not use more than one mattress in the cot, stop using the cot when the child can climb out of the cot.
- All assembly fittings should always be tightened properly, and fittings should be checked regularly and retightened as necessary;
- The mattress is an integral part of the product through a mattress base.
- Recommended age for using the playpen: from birth to 4 years (up to 15 kg).
Specifications
| Product Name | Piccolo+ |
|---|---|
| Model Number | CRL-11501/2 |
FAQ
What is the recommended age for using the playpen?
From birth to 4 years (up to 15 kg).
Can I use more than one mattress in the cot?
No, do not use more than one mattress in the cot.
What should I do if a part of the cot is broken or missing?
Do not use the cot and use only spare parts approved by the manufacturer.
How do I know if the cot is assembled correctly?
Ensure all assembly fittings are tightened properly and checked regularly.
Is it safe to place the cot near a heat source?
No, be aware of the risk of open fire and other sources of strong heat in the near vicinity of the cot.
Notes
This section provides space for the user to write down any notes or important reminders.
Instructions
Warning
- Do not suspend strings or toys over the travel cot.
- Never leave your child unattended.
- Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot;
- Do not use the cot if any part is broken, torn or missing and use only spare parts approved by he manufacturer;
- Do not leave anything in the cot or place the cot close to another product, that could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc;
- When used as a Playpen, never use it without the base
- The travel cot shall be kept away from cords and flexes.
- Do not use more than one mattress in the cot, stop using the cot when the child can climb out of the cot.
- All assembly fittings should always be tightened properly, and fittings should be checked regularly and retightened as necessary;
- The mattress is an integral part of the product through a mattress base.
- Recommended age for using the playpen: from birth to 4 years (up to 15 kg).
Assembling of the Cot
- Unzip bag. Remove the travel cot and stand the unit upright. Separate two velcro labs.
- Remove the mattress pad.
- Separate the four corner posts.
- Lift the side rails upwards from the middle until each locks into position. Side rails must be raised above the horizontal position before they lock.
- Push down the centre support until it locks into position.
Assembling the level of the cot
- Take off the second-level pad.
- Install the second level in the inside of the travel cot with hooks over the entire inner length.
- Fit the tubes together.
- Place the mattress on the second layer.
Folding
- Remove the mattress pad to release the locking mechanism
- Make sure the pressure centre bottom land. Then pull the centre lock up, to ensure the vertical upward. If forced to pull the centre lock hard up, will be broken.
- Press the buttons at the centre joint of each end rail and release downwards. Repeat for each side rail.
- Gather units together.
- Lay mattress pad on the floor- soft side up and lay travel cot on top. Wrap the mattress pad around the travel cot and fasten the two Velcro labs.
- Place travel cot into bad and zipper together.
The travel cot is now ready for easy carrying or storage.
Read User Manual Online (PDF format)
Loading......