Velox MGSFIO102 Magnetic Air Vent Mount User Manual
- June 1, 2024
- Velox
Table of Contents
Velox MGSFIO102 Magnetic Air Vent Mount
Product Introduction
- Specifications:
- Mount Length: 2.3 inches
- Mount Width: 2.3 inches
- Mount Height: 2.31 inches
- Mount Weight: 50g.
- Device Compatibility:
- Velox products are designed for use with MagSafe Compatible iPhones and cases.
- Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, and the iPhone 12 Series.
- For non-MagSafe phones and cases, use the included magnetic ring adapter.
Product Usage Instructions
- Installing the Magnetic Air Vent Mount
- Attaching the Air Vent Mount:
- Simply push the Velox mount onto the blade of your vehicle’s air vent. The silicone texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.
- Mounting your phone:
- Simply place your phone against the mount, and the magnets will hold it in place. You are now ready to start driving.
- Note: Mount is designed to be used only with FLAT air vent blades. Mount can also be used as a kickstand for your smartphone.
- Attaching the Magnetic Ring Adapter:
- Clean the back of your phone or phone case with the wet wipe, then use the dry wipe.
- Position the alignment guide so that the opening is in the centre of your phone or case.
- Remove the protective film from the magnetic ring.
- Carefully place the magnetic ring inside the opening on the alignment guide and press firmly. Wait at least one hour before using.
- Note: Once attached, the ring can be removed, but not repositioned.
FAQs
- Q: Can I use this mount with non-MagSafe phones?
- A: Yes, for non-MagSafe phones and cases, you can use the included magnetic ring adapter for compatibility.
- Q: Is it safe to use this mount while driving on rough roads?
- A: Yes, the silicone texture of the prongs ensures that the mount stays securely attached to the air vent even on rough roads.
Product Information
At a Glance
Device Compatibility
- Velox products are designed for use with MagSafe Compatible iPhones and cases.
- Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max and the iPhone 12 Series.
- For non-MagSafe phones and cases, use the included magnetic ring adapter.
Product Specifications
| Item | Specification |
|---|---|
| Mount Length | 2.3″ |
| Mount Width | 2.3″ |
| Mount Height | 2.31″ |
| Mount Weight | 1.85 oz. |
iOttie is not liable for possible damages due to product misuse.
Installing the Magnetic Air Vent Mount
- Attaching the Air Vent Mount
- Simply push the Velox mount onto the blade of your vehicle’s air vent.
- The silicon texture of the prongs will ensure that the mount does not fall off even when driving on rough roads.
- The mount is designed to be used only with FLAT air vent blades.
Mounting your phone
- Simply place your phone against the mount, and the magnets will hold it in place.
- You are now ready to start driving.
Additional Information
- Mount can also be used as a kickstand for your smartphone.
Attaching the Magnetic Ring Adapter
- Clean the back of your phone or phone case with the wet wipe, then use the dry wipe.
- Position the alignment guide so that the opening is in the centre of your phone or case.
- Remove the protective film from the magnetic ring.
- Carefully place the magnetic ring inside the opening on the alignment guide and press firmly. Wait at least one hour before using.
Note: Once attached, the ring can be removed, but not repositioned. The Velox Magnetic Air Vent Mount is backed by a 2-year warranty.
Read User Manual Online (PDF format)
Loading......