Tripp Lite B140-110 DVI over Cat5/6 Extender Instruction Manual

: June 1, 2024
: Tripp Lite

Table of Contents

Tripp Lite B140-110 DVI over Cat5/6 Extender
Description
Features
System Requirements
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Tripp Lite B140-110 DVI over Cat5/6 Extender

MODEL NUMBER: B140-110

Tripp-Lite-B140-110-DVI-over-Cat5-6-Extender-FIG-1

Extend and expand a Tripp Lite B140-Series DVI over Cat5 installation

Description

The B140-110 remote repeater unit can be added to your B140-Series HDMI over Cat5 installation to expand the range and number of monitors. It transmits a DVI-D Single-Link signal up to 175 feet (53.3 meters) away using a single Cat5e/6 Ethernet cable.To achieve maximum distance and resolution, use 24 AWG solid wire Cat5e/6 cable (N202-Series). The B140-110 is compatible with all operating systems and is plug-and-play with no software or drivers required. It features a built-in equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Just insert the B140-110 repeater into the middle of your installation (cannot be used with passive extender kits or passive receiver units). In the case of a B140-101X active extender kit, the built-in DVI connector on the transmitter is connected to the DVI source. It is then connected via Cat5e/6 cable to the B140-110, which is connected via Cat5e/6 cable to the B140-101X receiver unit. Finally, a monitor is connected to both the repeater and receiver units using a P561-Series DVI cable (not included).

Connect up to four remote units (three repeaters and one active receiver) in a single chain for a total of four displays (an active receiver should be the last unit in a chain).
A 1920 x 1080 at 60 Hz signal can be extended up to 125 feet (38.1 meters) from each repeater to the next unit in the channel, or a 1024 x 768 at 60 Hz signal can be extended up to 175 feet.

Features

Supports DVI-D Single-Link video resolutions up to 1920 x 1080 at 60 Hz
Extends a 1920 x 1080 at 60 Hz signal up to 125-ft. (38.1 m), or a 1024 x 768 at 60 Hz signal up to 175-ft. (53.3 m)
Insert into your B140-Series DVI over Cat5 installation to expand the range and number of monitors (Cannot be used with Passive extender kits or Passive receiver units)
Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit in a chain)
A 1920 x 1080 at 60 Hz signal can be extended up to 125-ft. (38.1 m) from each repeater to the next unit in the chain, or a 1024 x 768 at 60 Hz signal can be extended up to 175-ft. (53.3 m)
Use 24 AWG Solid Wire Cat5e/6 cable, such as N202-Series, to achieve maximum distance and resolution
Features a built-in Equalization control for adjustment of the video image
HDCP compatible

Highlights

Insert into your B140-Series DVI over Cat5 installation to expand the range and number of monitors (Cannot be used with Passive extender kits or Passive receiver units)
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60 Hz
Extends a 1920 x 1080 @ 60 Hz signal up to 125 ft. (38.1 m), or a 1024 x 768 @ 60 Hz signal up to 175 ft. (53.34 m)
Use 24 AWG, Solid Wire Cat5e/6 cable, such as N202-Series, to achieve maximum distance and resolution
Compatible with all operating systems
Plug and play, no software or drivers required
Features a built-in Equalization control for adjustment of the video image
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

System Requirements

Package Includes

B140-110 Extender / Repeater Unit
External Power Supply with NEMA 1-15P Plug (Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A)
Mounting Hardware
Screwdriver for Equalization Adjustment
- Compatible with all operating systems
- Plug and play; no software or drivers required
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Specifications

OVERVIEW

UPC Code| 037332168085
Product Type| Repeater
Technology| DVI; Cat5/5e; Cat6

VIDEO

175 ft.

INPUT

AC Power Adapter Plug(s)| NEMA 1-15P North America
AC Power Adapter Input Specs (V / Hz / A)| ****

100-240V / 50/60Hz / 0.5A

AC Power Adapter Output Specs (V

/ A)

| ****

5V / 2A

AC Power Adapter Cord Length (ft.)| 4.5
AC Power Adapter Cord Length (m)| 1.4
Bus Powered| No

POWER

Power Source Type| AC Adapter
AC Plug Type| NEMA 1-15P
---|---
Power Source| Unit (Included)
Power Over Cable (PoC) Support| No
AC Adapter| Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A
DC Barrel Plug| OD: 5.5 x 2.1 x 7.5mm, Positive Pin, Negative Sleeve

CONNECTIONS

USER INTERFACE, ALERTS & CONTROLS

LED Indicators| Power (Green); Activity (Orange)

PHYSICAL

ENVIRONMENTAL

Operating Temperature Range| 32° to 104°F (0° to 40°C)
Storage Temperature Range| 5° to 122°F (-15° to 50°C)
Relative Humidity| 0% to 85%, Non-Condensing

COMMUNICATIONS

Yes

USB Extension Support| No

FEATURES & SPECIFICATIONS

10/100 Ethernet Extension Support| No
Built-In Equalizer| Yes
Driver Required| No

STANDARDS & COMPLIANCE

External Power Supply Certifications| FCC; PSE; TUV; UL; cUL
Product Compliance| RoHS; REACH; FCC (USA); Trade Agreements Act (TAA)

WARRANTY & SUPPORT

Product Warranty Period (Worldwide)| ****

1-year limited warranty

1000 Eaton Boulevard Cleveland, OH 44122 United States https://tripplite.eaton.com